select SYS_CACHE_SHIFT_5
imply SYS_ARM_MMU
+config CPU_PXA27X
+ bool
+ select CPU_PXA
+
config CPU_SA1100
bool
select SYS_CACHE_SHIFT_5
values, then choose this option, and create a file included as
<asm/arch/boot0.h> which contains the required assembler code.
-config ARM_CORTEX_CPU_IS_UP
- bool
-
config USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy"
default y if !ARM64
select OF_CONTROL
imply CMD_DM
+config ARCH_BCM6753
+ bool "Broadcom BCM6753 family"
+ select CPU_V7A
+ select DM
+ select OF_CONTROL
+ imply CMD_DM
+
config ARCH_BCM68360
bool "Broadcom BCM68360 family"
select DM
select GPIO_EXTRA_HEADER
select OF_CONTROL
imply CMD_DM
+ imply OF_HAS_PRIOR_STAGE
help
This enables support for Broadcom ARM-based set-top box
chipsets, including the 7445 family of chips.
select DM
select DM_SERIAL
select OF_CONTROL
- select OF_BOARD
select CLK
select CLK_CCF
select AHCI
select DM_ETH
select PHYS_64BIT
+ imply OF_HAS_PRIOR_STAGE
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select SUPPORT_SPL
imply TI_SYSC if DM && OF_CONTROL
imply FIT
+ imply DM_EVENT
config ARCH_MESON
bool "Amlogic Meson"
select MACH_IMX
select OF_CONTROL
select ENABLE_ARM_SOC_BOOT0_HOOK
+ imply DM_EVENT
config ARCH_IMX8M
bool "NXP i.MX8M platform"
select DM
select SUPPORT_SPL
imply CMD_DM
+ imply DM_EVENT
config ARCH_IMX8ULP
bool "NXP i.MX8ULP platform"
select SUPPORT_SPL
select GPIO_EXTRA_HEADER
imply CMD_DM
+ imply DM_EVENT
config ARCH_IMXRT
bool "NXP i.MXRT platform"
config ARCH_MX7ULP
bool "NXP MX7ULP"
+ select BOARD_POSTCLK_INIT
select CPU_V7A
select GPIO_EXTRA_HEADER
select MACH_IMX
config ARCH_MX6
bool "Freescale MX6"
+ select BOARD_POSTCLK_INIT
select CPU_V7A
select GPIO_EXTRA_HEADER
select MACH_IMX
select CLK
select CMD_USB
select DM
+ select DM_GPIO
select DM_KEYBOARD
+ select DM_MAILBOX
+ select DM_RESET
select DM_SERIAL
+ select DM_SPI
select DM_USB
select DM_VIDEO
select IOMMU
select LINUX_KERNEL_IMAGE_HEADER
select OF_CONTROL
- select OF_BOARD
+ select PINCTRL
select POSITION_INDEPENDENT
+ select POWER_DOMAIN
+ select REGMAP
+ select SPI
+ select SYSCON
+ select SYSRESET
+ select SYSRESET_WATCHDOG
+ select SYSRESET_WATCHDOG_AUTO
select USB
imply CMD_DM
imply CMD_GPT
imply DISTRO_DEFAULTS
+ imply OF_HAS_PRIOR_STAGE
config ARCH_OWL
bool "Actions Semi OWL SoCs"
imply DM_RNG
imply DM_RTC
imply RTC_PL031
+ imply OF_HAS_PRIOR_STAGE
config ARCH_RMOBILE
bool "Renesas ARM SoCs"
select DM_ETH
select DM_GPIO
select DM_I2C if I2C
+ select DM_SPI if SPI
+ select DM_SPI_FLASH if SPI
select DM_KEYBOARD
select DM_MMC if MMC
select DM_SCSI if SCSI
select DM_MMC if MMC
select DM_SERIAL
select GICV3
- select GPIO_EXTRA_HEADER
select OF_CONTROL
select SOC_DEVICE
imply BOARD_LATE_INIT
select CLK
select CLK_ZYNQ
select CPU_V7A
+ select DEBUG_UART_BOARD_INIT if SPL && DEBUG_UART
select DM
select DM_ETH if NET
select DM_MMC if MMC
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
- select GPIO_EXTRA_HEADER
select OF_CONTROL
select SPI
select SPL_BOARD_INIT if SPL
select DM_ETH if NET
select DM_MMC if MMC
select DM_SERIAL
- select GPIO_EXTRA_HEADER
select OF_CONTROL
imply CMD_DM
imply DM_USB_GADGET
select ARM64
select CLK
select DM
+ select DEBUG_UART_BOARD_INIT if SPL && DEBUG_UART
select DM_ETH if NET
select DM_MAILBOX
select DM_MMC if MMC
select DM_SERIAL
select DM_SPI if SPI
select DM_SPI_FLASH if DM_SPI
- select FIRMWARE
+ imply FIRMWARE
select GICV2
- select GPIO_EXTRA_HEADER
select OF_CONTROL
select SPL_BOARD_INIT if SPL
select SPL_CLK if SPL
select SPL_DM_SPI if SPI && SPL_DM
select SPL_DM_SPI_FLASH if SPL_DM_SPI
select SPL_DM_MAILBOX if SPL
- select SPL_FIRMWARE if SPL
+ imply SPL_FIRMWARE if SPL
select SPL_SEPARATE_BSS if SPL
select SUPPORT_SPL
select ZYNQMP_IPI
imply FAT_WRITE
imply MP
imply DM_USB_GADGET
+ imply ZYNQMP_GPIO_MODEPIN if DM_GPIO && USB
config ARCH_TEGRA
bool "NVIDIA Tegra"
select PL01X_SERIAL
select DM
select OF_CONTROL
- select OF_BOARD
select CLK
select DM_SERIAL
select ARM_PSCI_FW
select DM_ETH
select BLK
select USB
+ imply OF_HAS_PRIOR_STAGE
config TARGET_TOTAL_COMPUTE
bool "Support Total Compute Platform"
help
Support for Kontron SMARC-sAL28 board.
+config TARGET_TEN64
+ bool "Support ten64"
+ select ARCH_LS1088A
+ select ARCH_MISC_INIT
+ select ARM64
+ select ARMV8_MULTIENTRY
+ select ARCH_SUPPORT_TFABOOT
+ select BOARD_LATE_INIT
+ select SUPPORT_SPL
+ select FSL_DDR_INTERACTIVE if !SD_BOOT
+ select GPIO_EXTRA_HEADER
+ help
+ Support for Traverse Technologies Ten64 board, based
+ on NXP LS1088A.
+
config TARGET_COLIBRI_PXA270
bool "Support colibri_pxa270"
- select CPU_PXA
+ select CPU_PXA27X
select GPIO_EXTRA_HEADER
config ARCH_UNIPHIER
imply OF_LIBFDT_OVERLAY
imply ENV_VARS_UBOOT_RUNTIME_CONFIG
imply USE_PREBOOT
+ imply TIMESTAMP
help
Support for STM32MP SoC family developed by STMicroelectronics,
MPUs based on ARM cortex A core
select OF_LIVE
select BOARD_LATE_INIT
select SYS_CACHE_SHIFT_7
+ select SYS_PCI_64BIT if PCI
+ imply OF_HAS_PRIOR_STAGE
config ARCH_OCTEONTX2
bool "Support OcteonTX2 SoCs"
select OF_LIVE
select BOARD_LATE_INIT
select SYS_CACHE_SHIFT_7
+ select SYS_PCI_64BIT if PCI
+ imply OF_HAS_PRIOR_STAGE
config TARGET_THUNDERX_88XX
bool "Support ThunderX 88xx"
Support for durian platform.
It has 2GB Sdram, uart and pcie.
+config TARGET_POMELO
+ bool "Support Phytium Pomelo Platform"
+ select ARM64
+ select DM
+ select AHCI
+ select SCSI_AHCI
+ select AHCI_PCI
+ select BLK
+ select PCI
+ select DM_PCI
+ select SCSI
+ select DM_SCSI
+ select DM_SERIAL
+ select DM_ETH if NET
+ imply CMD_PCI
+ help
+ Support for pomelo platform.
+ It has 8GB Sdram, uart and pcie.
+
config TARGET_PRESIDIO_ASIC
bool "Support Cortina Presidio ASIC Platform"
select ARM64
select LINUX_KERNEL_IMAGE_HEADER
select XEN_SERIAL
select SSCANF
+ imply OF_HAS_PRIOR_STAGE
+
endchoice
config SUPPORT_PASSING_ATAGS
image headers.
endif
+config SYS_KWD_CONFIG
+ string "kwbimage config file path"
+ depends on ARCH_KIRKWOOD || ARCH_MVEBU
+ default "arch/arm/mach-mvebu/kwbimage.cfg"
+ help
+ Path within the source directory to the kwbimage.cfg file to use
+ when packaging the U-Boot image for use.
+
source "arch/arm/mach-apple/Kconfig"
source "arch/arm/mach-aspeed/Kconfig"
source "board/armltd/vexpress64/Kconfig"
source "board/cortina/presidio-asic/Kconfig"
source "board/broadcom/bcm963158/Kconfig"
+source "board/broadcom/bcm96753ref/Kconfig"
source "board/broadcom/bcm968360bg/Kconfig"
source "board/broadcom/bcm968580xref/Kconfig"
source "board/broadcom/bcmns3/Kconfig"
source "board/st/stv0991/Kconfig"
source "board/tcl/sl50/Kconfig"
source "board/toradex/colibri_pxa270/Kconfig"
+source "board/traverse/ten64/Kconfig"
source "board/variscite/dart_6ul/Kconfig"
source "board/vscom/baltos/Kconfig"
source "board/phytium/durian/Kconfig"
+source "board/phytium/pomelo/Kconfig"
source "board/xen/xenguest_arm64/Kconfig"
source "board/keymile/Kconfig"
projects / thirdparty / u-boot.git / blobdiff