TI: Migrate board/ti/common/Kconfig to imply

[people/ms/u-boot.git] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index de4bf832b9ccf6831d399a0df94e5d9c51fd3de0..5e1838474e3323e022fec2b88e1fc7d13bcd40ad 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -126,6 +126,42 @@ config ENABLE_ARM_SOC_BOOT0_HOOK
          ARM_SOC_BOOT0_HOOK which contains the required assembler
          preprocessor code.
 
+config USE_ARCH_MEMCPY
+       bool "Use an assembly optimized implementation of memcpy"
+       default y
+       depends on !ARM64
+       help
+         Enable the generation of an optimized version of memcpy.
+         Such implementation may be faster under some conditions
+         but may increase the binary size.
+
+config SPL_USE_ARCH_MEMCPY
+       bool "Use an assembly optimized implementation of memcpy"
+       default y if USE_ARCH_MEMCPY
+       depends on !ARM64
+       help
+         Enable the generation of an optimized version of memcpy.
+         Such implementation may be faster under some conditions
+         but may increase the binary size.
+
+config USE_ARCH_MEMSET
+       bool "Use an assembly optimized implementation of memset"
+       default y
+       depends on !ARM64
+       help
+         Enable the generation of an optimized version of memset.
+         Such implementation may be faster under some conditions
+         but may increase the binary size.
+
+config SPL_USE_ARCH_MEMSET
+       bool "Use an assembly optimized implementation of memset"
+       default y if USE_ARCH_MEMSET
+       depends on !ARM64
+       help
+         Enable the generation of an optimized version of memset.
+         Such implementation may be faster under some conditions
+         but may increase the binary size.
+
 config ARCH_OMAP2
        bool
        select CPU_V7
@@ -165,6 +201,8 @@ config ARCH_DAVINCI
 config KIRKWOOD
        bool "Marvell Kirkwood"
        select CPU_ARM926EJS
+       select BOARD_EARLY_INIT_F
+       select ARCH_MISC_INIT
 
 config ARCH_MVEBU
        bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
@@ -188,10 +226,13 @@ config TARGET_WORK_92105
 
 config TARGET_MX25PDK
        bool "Support mx25pdk"
+       select BOARD_LATE_INIT
        select CPU_ARM926EJS
+       select BOARD_EARLY_INIT_F
 
 config TARGET_ZMX25
        bool "Support zmx25"
+       select BOARD_LATE_INIT
        select CPU_ARM926EJS
 
 config TARGET_APF27
@@ -218,16 +259,19 @@ config TARGET_MX23EVK
        bool "Support mx23evk"
        select CPU_ARM926EJS
        select SUPPORT_SPL
+       select BOARD_EARLY_INIT_F
 
 config TARGET_MX28EVK
        bool "Support mx28evk"
        select CPU_ARM926EJS
        select SUPPORT_SPL
+       select BOARD_EARLY_INIT_F
 
 config TARGET_MX23_OLINUXINO
        bool "Support mx23_olinuxino"
        select CPU_ARM926EJS
        select SUPPORT_SPL
+       select BOARD_EARLY_INIT_F
 
 config TARGET_BG0900
        bool "Support bg0900"
@@ -251,18 +295,22 @@ config ORION5X
 config TARGET_SPEAR300
        bool "Support spear300"
        select CPU_ARM926EJS
+       select BOARD_EARLY_INIT_F
 
 config TARGET_SPEAR310
        bool "Support spear310"
        select CPU_ARM926EJS
+       select BOARD_EARLY_INIT_F
 
 config TARGET_SPEAR320
        bool "Support spear320"
        select CPU_ARM926EJS
+       select BOARD_EARLY_INIT_F
 
 config TARGET_SPEAR600
        bool "Support spear600"
        select CPU_ARM926EJS
+       select BOARD_EARLY_INIT_F
 
 config TARGET_STV0991
        bool "Support stv0991"
@@ -275,21 +323,32 @@ config TARGET_STV0991
 
 config TARGET_X600
        bool "Support x600"
+       select BOARD_LATE_INIT
        select CPU_ARM926EJS
        select SUPPORT_SPL
 
 config TARGET_IMX31_PHYCORE
-       bool "Support imx31_phycore"
+       bool "Support imx31_phycore_eet"
+       select CPU_ARM1136
+       select BOARD_EARLY_INIT_F
+
+config TARGET_IMX31_PHYCORE_EET
+       bool "Support imx31_phycore_eet"
+       select BOARD_LATE_INIT
        select CPU_ARM1136
+       select BOARD_EARLY_INIT_F
 
 config TARGET_MX31ADS
        bool "Support mx31ads"
        select CPU_ARM1136
+       select BOARD_EARLY_INIT_F
 
 config TARGET_MX31PDK
        bool "Support mx31pdk"
+       select BOARD_LATE_INIT
        select CPU_ARM1136
        select SUPPORT_SPL
+       select BOARD_EARLY_INIT_F
 
 config TARGET_WOODBURN
        bool "Support woodburn"
@@ -306,6 +365,7 @@ config TARGET_FLEA3
 
 config TARGET_MX35PDK
        bool "Support mx35pdk"
+       select BOARD_LATE_INIT
        select CPU_ARM1136
 
 config ARCH_BCM283X
@@ -332,14 +392,17 @@ config TARGET_VEXPRESS_CA9X4
 config TARGET_BRXRE1
        bool "Support BRXRE1"
        select ARCH_OMAP2
+       select BOARD_LATE_INIT
 
 config TARGET_BRPPT1
        bool "Support BRPPT1"
        select ARCH_OMAP2
+       select BOARD_LATE_INIT
 
 config TARGET_DRACO
        bool "Support draco"
        select ARCH_OMAP2
+       select BOARD_LATE_INIT
        select DM
        select DM_SERIAL
        select DM_GPIO
@@ -347,6 +410,7 @@ config TARGET_DRACO
 config TARGET_THUBAN
        bool "Support thuban"
        select ARCH_OMAP2
+       select BOARD_LATE_INIT
        select DM
        select DM_SERIAL
        select DM_GPIO
@@ -354,6 +418,7 @@ config TARGET_THUBAN
 config TARGET_RASTABAN
        bool "Support rastaban"
        select ARCH_OMAP2
+       select BOARD_LATE_INIT
        select DM
        select DM_SERIAL
        select DM_GPIO
@@ -361,6 +426,7 @@ config TARGET_RASTABAN
 config TARGET_ETAMIN
        bool "Support etamin"
        select ARCH_OMAP2
+       select BOARD_LATE_INIT
        select DM
        select DM_SERIAL
        select DM_GPIO
@@ -368,6 +434,7 @@ config TARGET_ETAMIN
 config TARGET_PXM2
        bool "Support pxm2"
        select ARCH_OMAP2
+       select BOARD_LATE_INIT
        select DM
        select DM_SERIAL
        select DM_GPIO
@@ -375,6 +442,7 @@ config TARGET_PXM2
 config TARGET_RUT
        bool "Support rut"
        select ARCH_OMAP2
+       select BOARD_LATE_INIT
        select DM
        select DM_SERIAL
        select DM_GPIO
@@ -446,39 +514,57 @@ config ARCH_MESON
 config ARCH_MX7
        bool "Freescale MX7"
        select CPU_V7
+       select SYS_FSL_HAS_SEC if SECURE_BOOT
+       select SYS_FSL_SEC_COMPAT_4
+       select SYS_FSL_SEC_LE
+       select BOARD_EARLY_INIT_F
+       select ARCH_MISC_INIT
 
 config ARCH_MX6
        bool "Freescale MX6"
        select CPU_V7
+       select SYS_FSL_HAS_SEC if SECURE_BOOT
+       select SYS_FSL_SEC_COMPAT_4
+       select SYS_FSL_SEC_LE
 
 config ARCH_MX5
        bool "Freescale MX5"
        select CPU_V7
+       select BOARD_EARLY_INIT_F
 
 config TARGET_M53EVK
        bool "Support m53evk"
        select CPU_V7
        select SUPPORT_SPL
+       select BOARD_EARLY_INIT_F
 
 config TARGET_MX51EVK
        bool "Support mx51evk"
+       select BOARD_LATE_INIT
        select CPU_V7
+       select BOARD_EARLY_INIT_F
 
 config TARGET_MX53ARD
        bool "Support mx53ard"
        select CPU_V7
+       select BOARD_EARLY_INIT_F
 
 config TARGET_MX53EVK
        bool "Support mx53evk"
+       select BOARD_LATE_INIT
        select CPU_V7
+       select BOARD_EARLY_INIT_F
 
 config TARGET_MX53LOCO
        bool "Support mx53loco"
+       select BOARD_LATE_INIT
        select CPU_V7
+       select BOARD_EARLY_INIT_F
 
 config TARGET_MX53SMD
        bool "Support mx53smd"
        select CPU_V7
+       select BOARD_EARLY_INIT_F
 
 config OMAP34XX
        bool "OMAP34XX SoC"
@@ -493,6 +579,19 @@ config OMAP44XX
 config OMAP54XX
        bool "OMAP54XX SoC"
        select ARCH_OMAP2
+       imply SPL_DISPLAY_PRINT
+       imply SPL_ENV_SUPPORT
+       imply SPL_EXT_SUPPORT
+       imply SPL_FAT_SUPPORT
+       imply SPL_GPIO_SUPPORT
+       imply SPL_I2C_SUPPORT
+       imply SPL_LIBCOMMON_SUPPORT
+       imply SPL_LIBDISK_SUPPORT
+       imply SPL_LIBGENERIC_SUPPORT
+       imply SPL_MMC_SUPPORT
+       imply SPL_NAND_SUPPORT
+       imply SPL_POWER_SUPPORT
+       imply SPL_SERIAL_SUPPORT
 
 config AM43XX
        bool "AM43XX SoC"
@@ -518,10 +617,12 @@ config ARCH_RMOBILE
        bool "Renesas ARM SoCs"
        select DM
        select DM_SERIAL
+       select BOARD_EARLY_INIT_F
 
 config TARGET_S32V234EVB
        bool "Support s32v234evb"
        select ARM64
+       select SYS_FSL_ERRATUM_ESDHC111
 
 config ARCH_SNAPDRAGON
        bool "Qualcomm Snapdragon SoCs"
@@ -542,6 +643,10 @@ config ARCH_SOCFPGA
        select DM
        select DM_SPI_FLASH
        select DM_SPI
+       select ENABLE_ARM_SOC_BOOT0_HOOK
+       select ARCH_EARLY_INIT_R
+       select ARCH_MISC_INIT
+       select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
 
 config TARGET_CM_T43
        bool "Support cm_t43"
@@ -577,25 +682,36 @@ config TARGET_TS4600
 config TARGET_TS4800
        bool "Support TS4800"
        select CPU_V7
+       select SYS_FSL_ERRATUM_ESDHC_A001
 
 config TARGET_VF610TWR
        bool "Support vf610twr"
        select CPU_V7
+       select SYS_FSL_ERRATUM_ESDHC111
 
 config TARGET_COLIBRI_VF
        bool "Support Colibri VF50/61"
+       select BOARD_LATE_INIT
        select CPU_V7
+       select SYS_FSL_ERRATUM_ESDHC111
 
 config TARGET_PCM052
        bool "Support pcm-052"
        select CPU_V7
+       select SYS_FSL_ERRATUM_ESDHC111
+       select SYS_FSL_ERRATUM_ESDHC135
+       select SYS_FSL_ERRATUM_ESDHC_A001
 
 config TARGET_BK4R1
        bool "Support BK4r1"
        select CPU_V7
+       select SYS_FSL_ERRATUM_ESDHC111
+       select SYS_FSL_ERRATUM_ESDHC135
+       select SYS_FSL_ERRATUM_ESDHC_A001
 
 config ARCH_ZYNQ
        bool "Xilinx Zynq Platform"
+       select BOARD_LATE_INIT
        select CPU_V7
        select SUPPORT_SPL
        select OF_CONTROL
@@ -616,6 +732,7 @@ config ARCH_ZYNQ
 config ARCH_ZYNQMP
        bool "Support Xilinx ZynqMP Platform"
        select ARM64
+       select BOARD_LATE_INIT
        select DM
        select OF_CONTROL
        select DM_SERIAL
@@ -654,6 +771,7 @@ config TARGET_LS2080A_EMU
        select ARCH_LS2080A
        select ARM64
        select ARMV8_MULTIENTRY
+       select ARCH_MISC_INIT
        help
          Support for Freescale LS2080A_EMU platform
          The LS2080A Development System (EMULATOR) is a pre silicon
@@ -665,6 +783,7 @@ config TARGET_LS2080A_SIMU
        select ARCH_LS2080A
        select ARM64
        select ARMV8_MULTIENTRY
+       select ARCH_MISC_INIT
        help
          Support for Freescale LS2080A_SIMU platform
          The LS2080A Development System (QDS) is a pre silicon
@@ -676,7 +795,9 @@ config TARGET_LS2080AQDS
        select ARCH_LS2080A
        select ARM64
        select ARMV8_MULTIENTRY
+       select BOARD_LATE_INIT
        select SUPPORT_SPL
+       select ARCH_MISC_INIT
        help
          Support for Freescale LS2080AQDS platform
          The LS2080A Development System (QDS) is a high-performance
@@ -688,7 +809,9 @@ config TARGET_LS2080ARDB
        select ARCH_LS2080A
        select ARM64
        select ARMV8_MULTIENTRY
+       select BOARD_LATE_INIT
        select SUPPORT_SPL
+       select ARCH_MISC_INIT
        help
          Support for Freescale LS2080ARDB platform.
          The LS2080A Reference design board (RDB) is a high-performance
@@ -710,6 +833,7 @@ config TARGET_LS1012AQDS
        bool "Support ls1012aqds"
        select ARCH_LS1012A
        select ARM64
+       select BOARD_LATE_INIT
        help
          Support for Freescale LS1012AQDS platform.
          The LS1012A Development System (QDS) is a high-performance
@@ -720,6 +844,7 @@ config TARGET_LS1012ARDB
        bool "Support ls1012ardb"
        select ARCH_LS1012A
        select ARM64
+       select BOARD_LATE_INIT
        help
          Support for Freescale LS1012ARDB platform.
          The LS1012A Reference design board (RDB) is a high-performance
@@ -738,6 +863,7 @@ config TARGET_LS1012AFRDM
 
 config TARGET_LS1021AQDS
        bool "Support ls1021aqds"
+       select BOARD_LATE_INIT
        select CPU_V7
        select CPU_V7_HAS_NONSEC
        select CPU_V7_HAS_VIRT
@@ -745,9 +871,12 @@ config TARGET_LS1021AQDS
        select ARCH_LS1021A
        select ARCH_SUPPORT_PSCI
        select LS1_DEEP_SLEEP
+       select SYS_FSL_DDR
+       select BOARD_EARLY_INIT_F
 
 config TARGET_LS1021ATWR
        bool "Support ls1021atwr"
+       select BOARD_LATE_INIT
        select CPU_V7
        select CPU_V7_HAS_NONSEC
        select CPU_V7_HAS_VIRT
@@ -755,9 +884,11 @@ config TARGET_LS1021ATWR
        select ARCH_LS1021A
        select ARCH_SUPPORT_PSCI
        select LS1_DEEP_SLEEP
+       select BOARD_EARLY_INIT_F
 
 config TARGET_LS1021AIOT
        bool "Support ls1021aiot"
+       select BOARD_LATE_INIT
        select CPU_V7
        select CPU_V7_HAS_NONSEC
        select CPU_V7_HAS_VIRT
@@ -775,7 +906,9 @@ config TARGET_LS1043AQDS
        select ARCH_LS1043A
        select ARM64
        select ARMV8_MULTIENTRY
+       select BOARD_LATE_INIT
        select SUPPORT_SPL
+       select BOARD_EARLY_INIT_F
        help
          Support for Freescale LS1043AQDS platform.
 
@@ -784,7 +917,9 @@ config TARGET_LS1043ARDB
        select ARCH_LS1043A
        select ARM64
        select ARMV8_MULTIENTRY
+       select BOARD_LATE_INIT
        select SUPPORT_SPL
+       select BOARD_EARLY_INIT_F
        help
          Support for Freescale LS1043ARDB platform.
 
@@ -793,8 +928,10 @@ config TARGET_LS1046AQDS
        select ARCH_LS1046A
        select ARM64
        select ARMV8_MULTIENTRY
+       select BOARD_LATE_INIT
        select SUPPORT_SPL
        select DM_SPI_FLASH if DM_SPI
+       select BOARD_EARLY_INIT_F
        help
          Support for Freescale LS1046AQDS platform.
          The LS1046A Development System (QDS) is a high-performance
@@ -806,8 +943,11 @@ config TARGET_LS1046ARDB
        select ARCH_LS1046A
        select ARM64
        select ARMV8_MULTIENTRY
+       select BOARD_LATE_INIT
        select SUPPORT_SPL
        select DM_SPI_FLASH if DM_SPI
+       select POWER_MC34VR500
+       select BOARD_EARLY_INIT_F
        help
          Support for Freescale LS1046ARDB platform.
          The LS1046A Reference Design Board (RDB) is a high-performance
@@ -828,7 +968,7 @@ config TARGET_COLIBRI_PXA270
 
 config ARCH_UNIPHIER
        bool "Socionext UniPhier SoCs"
-       select BLK
+       select BOARD_LATE_INIT
        select CLK_UNIPHIER
        select DM
        select DM_GPIO
@@ -840,12 +980,11 @@ config ARCH_UNIPHIER
        select OF_CONTROL
        select OF_LIBFDT
        select PINCTRL
-       select SPL
-       select SPL_DM
-       select SPL_LIBCOMMON_SUPPORT
-       select SPL_LIBGENERIC_SUPPORT
-       select SPL_OF_CONTROL
-       select SPL_PINCTRL
+       select SPL_DM if SPL
+       select SPL_LIBCOMMON_SUPPORT if SPL
+       select SPL_LIBGENERIC_SUPPORT if SPL
+       select SPL_OF_CONTROL if SPL
+       select SPL_PINCTRL if SPL
        select SUPPORT_SPL
        help
          Support for UniPhier SoC family developed by Socionext Inc.
@@ -882,8 +1021,15 @@ config TARGET_THUNDERX_88XX
        select OF_CONTROL
        select SYS_CACHE_SHIFT_7
 
+config ARCH_ASPEED
+       bool "Support Aspeed SoCs"
+       select OF_CONTROL
+       select DM
+
 endchoice
 
+source "arch/arm/mach-aspeed/Kconfig"
+
 source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-bcm283x/Kconfig"
@@ -991,6 +1137,7 @@ source "board/freescale/mx53loco/Kconfig"
 source "board/freescale/mx53smd/Kconfig"
 source "board/freescale/s32v234evb/Kconfig"
 source "board/freescale/vf610twr/Kconfig"
+source "board/grinn/chiliboard/Kconfig"
 source "board/gumstix/pepper/Kconfig"
 source "board/h2200/Kconfig"
 source "board/hisilicon/hikey/Kconfig"