config ARCH_LS1012A
bool
select ARMV8_SET_SMPEN
+ select ARM_ERRATA_855873 if !TFABOOT
+ select FSL_LAYERSCAPE
select FSL_LSCH2
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
select SYS_FSL_DDR_BE
select SYS_FSL_MMDC
select SYS_FSL_ERRATUM_A010315
+ select SYS_FSL_ERRATUM_A009798
+ select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_ERRATUM_A009008
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1
+ select SYS_I2C_MXC_I2C2
+ imply PANIC_HANG
+
+config ARCH_LS1028A
+ bool
+ select ARMV8_SET_SMPEN
+ select FSL_LSCH3
+ select NXP_LSCH3_2
+ select SYS_FSL_HAS_CCI400
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
+ select SYS_FSL_DDR
+ select SYS_FSL_DDR_LE
+ select SYS_FSL_DDR_VER_50
+ select SYS_FSL_HAS_DDR3
+ select SYS_FSL_HAS_DDR4
+ select SYS_FSL_HAS_SEC
+ select SYS_FSL_SEC_COMPAT_5
+ select SYS_FSL_SEC_LE
+ select FSL_TZASC_1
+ select ARCH_EARLY_INIT_R
+ select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1
+ select SYS_I2C_MXC_I2C2
+ select SYS_I2C_MXC_I2C3
+ select SYS_I2C_MXC_I2C4
+ select SYS_I2C_MXC_I2C5
+ select SYS_I2C_MXC_I2C6
+ select SYS_I2C_MXC_I2C7
+ select SYS_I2C_MXC_I2C8
+ select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_ERRATUM_A008514 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009663 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+ imply PANIC_HANG
config ARCH_LS1043A
bool
select ARMV8_SET_SMPEN
+ select ARM_ERRATA_855873 if !TFABOOT
+ select FSL_LAYERSCAPE
select FSL_LSCH2
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
select SYS_FSL_DDR_VER_50
- select SYS_FSL_ERRATUM_A008850
- select SYS_FSL_ERRATUM_A009660
- select SYS_FSL_ERRATUM_A009663
+ select SYS_FSL_ERRATUM_A008850 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_ERRATUM_A009008
+ select SYS_FSL_ERRATUM_A009660 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009663 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A009929
- select SYS_FSL_ERRATUM_A009942
+ select SYS_FSL_ERRATUM_A009942 if !TFABOOT
select SYS_FSL_ERRATUM_A010315
select SYS_FSL_ERRATUM_A010539
select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_DDR4
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1
+ select SYS_I2C_MXC_I2C2
+ select SYS_I2C_MXC_I2C3
+ select SYS_I2C_MXC_I2C4
+ imply CMD_PCI
config ARCH_LS1046A
bool
select ARMV8_SET_SMPEN
+ select FSL_LAYERSCAPE
select FSL_LSCH2
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
select SYS_FSL_DDR_VER_50
- select SYS_FSL_ERRATUM_A008336
- select SYS_FSL_ERRATUM_A008511
- select SYS_FSL_ERRATUM_A008850
+ select SYS_FSL_ERRATUM_A008336 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008511 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008850 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_ERRATUM_A009008
+ select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A009801
- select SYS_FSL_ERRATUM_A009803
- select SYS_FSL_ERRATUM_A009942
- select SYS_FSL_ERRATUM_A010165
+ select SYS_FSL_ERRATUM_A009803 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+ select SYS_FSL_ERRATUM_A010165 if !TFABOOT
select SYS_FSL_ERRATUM_A010539
select SYS_FSL_HAS_DDR4
select SYS_FSL_SRDS_2
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1
+ select SYS_I2C_MXC_I2C2
+ select SYS_I2C_MXC_I2C3
+ select SYS_I2C_MXC_I2C4
+ imply SCSI
+ imply SCSI_AHCI
+
+config ARCH_LS1088A
+ bool
+ select ARMV8_SET_SMPEN
+ select ARM_ERRATA_855873 if !TFABOOT
+ select FSL_LAYERSCAPE
+ select FSL_LSCH3
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
+ select SYS_FSL_DDR
+ select SYS_FSL_DDR_LE
+ select SYS_FSL_DDR_VER_50
+ select SYS_FSL_EC1
+ select SYS_FSL_EC2
+ select SYS_FSL_ERRATUM_A009803 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+ select SYS_FSL_ERRATUM_A010165 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008511 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008850 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_HAS_CCI400
+ select SYS_FSL_HAS_DDR4
+ select SYS_FSL_HAS_RGMII
+ select SYS_FSL_HAS_SEC
+ select SYS_FSL_SEC_COMPAT_5
+ select SYS_FSL_SEC_LE
+ select SYS_FSL_SRDS_1
+ select SYS_FSL_SRDS_2
+ select FSL_TZASC_1
+ select FSL_TZASC_400
+ select FSL_TZPC_BP147
+ select ARCH_EARLY_INIT_R
+ select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1
+ select SYS_I2C_MXC_I2C2
+ select SYS_I2C_MXC_I2C3
+ select SYS_I2C_MXC_I2C4
+ imply SCSI
+ imply PANIC_HANG
config ARCH_LS2080A
bool
select ARM_ERRATA_828024
select ARM_ERRATA_829520
select ARM_ERRATA_833471
+ select FSL_LAYERSCAPE
select FSL_LSCH3
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
select SYS_FSL_DDR
select SYS_FSL_DDR_LE
select SYS_FSL_DDR_VER_50
+ select SYS_FSL_HAS_CCN504
select SYS_FSL_HAS_DP_DDR
select SYS_FSL_HAS_SEC
select SYS_FSL_HAS_DDR4
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_LE
select SYS_FSL_SRDS_2
- select SYS_FSL_ERRATUM_A008336
- select SYS_FSL_ERRATUM_A008511
- select SYS_FSL_ERRATUM_A008514
+ select FSL_TZASC_1
+ select FSL_TZASC_2
+ select FSL_TZASC_400
+ select FSL_TZPC_BP147
+ select SYS_FSL_ERRATUM_A008336 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008511 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008514 if !TFABOOT
select SYS_FSL_ERRATUM_A008585
+ select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
+ select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009635
- select SYS_FSL_ERRATUM_A009663
+ select SYS_FSL_ERRATUM_A009663 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A009801
- select SYS_FSL_ERRATUM_A009803
- select SYS_FSL_ERRATUM_A009942
- select SYS_FSL_ERRATUM_A010165
+ select SYS_FSL_ERRATUM_A009803 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+ select SYS_FSL_ERRATUM_A010165 if !TFABOOT
select SYS_FSL_ERRATUM_A009203
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1
+ select SYS_I2C_MXC_I2C2
+ select SYS_I2C_MXC_I2C3
+ select SYS_I2C_MXC_I2C4
+ imply DISTRO_DEFAULTS
+ imply PANIC_HANG
+
+config ARCH_LX2160A
+ bool
+ select ARMV8_SET_SMPEN
+ select FSL_LSCH3
+ select NXP_LSCH3_2
+ select SYS_HAS_SERDES
+ select SYS_FSL_SRDS_1
+ select SYS_FSL_SRDS_2
+ select SYS_NXP_SRDS_3
+ select SYS_FSL_DDR
+ select SYS_FSL_DDR_LE
+ select SYS_FSL_DDR_VER_50
+ select SYS_FSL_EC1
+ select SYS_FSL_EC2
+ select SYS_FSL_HAS_RGMII
+ select SYS_FSL_HAS_SEC
+ select SYS_FSL_HAS_CCN508
+ select SYS_FSL_HAS_DDR4
+ select SYS_FSL_SEC_COMPAT_5
+ select SYS_FSL_SEC_LE
+ select ARCH_EARLY_INIT_R
+ select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1
+ select SYS_I2C_MXC_I2C2
+ select SYS_I2C_MXC_I2C3
+ select SYS_I2C_MXC_I2C4
+ select SYS_I2C_MXC_I2C5
+ select SYS_I2C_MXC_I2C6
+ select SYS_I2C_MXC_I2C7
+ select SYS_I2C_MXC_I2C8
+ imply DISTRO_DEFAULTS
+ imply PANIC_HANG
+ imply SCSI
+ imply SCSI_AHCI
config FSL_LSCH2
bool
+ select SYS_FSL_HAS_CCI400
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_BE
- select SYS_FSL_SRDS_1
- select SYS_HAS_SERDES
config FSL_LSCH3
bool
- select SYS_FSL_SRDS_1
- select SYS_HAS_SERDES
+
+config NXP_LSCH3_2
+ bool
config FSL_MC_ENET
bool "Management Complex network"
- depends on ARCH_LS2080A
+ depends on ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A
default y
select RESV_RAM
help
menu "Layerscape architecture"
depends on FSL_LSCH2 || FSL_LSCH3
+config FSL_LAYERSCAPE
+ bool
+
config FSL_PCIE_COMPAT
string "PCIe compatible of Kernel DT"
- depends on PCIE_LAYERSCAPE
+ depends on PCIE_LAYERSCAPE || PCIE_LAYERSCAPE_GEN4
default "fsl,ls1012a-pcie" if ARCH_LS1012A
+ default "fsl,ls1028a-pcie" if ARCH_LS1028A
default "fsl,ls1043a-pcie" if ARCH_LS1043A
default "fsl,ls1046a-pcie" if ARCH_LS1046A
default "fsl,ls2080a-pcie" if ARCH_LS2080A
+ default "fsl,ls1088a-pcie" if ARCH_LS1088A
+ default "fsl,lx2160a-pcie" if ARCH_LX2160A
help
This compatible is used to find pci controller node in Kernel DT
to complete fixup.
which is loaded during boot stage, and then remains resident in RAM
and runs in the TrustZone after boot.
Say y to enable it.
+
+config SPL_FSL_LS_PPA
+ bool "FSL Layerscape PPA firmware support for SPL build"
+ depends on !ARMV8_PSCI
+ select SPL_ARMV8_SEC_FIRMWARE_SUPPORT
+ select SEC_FIRMWARE_ARMV8_PSCI
+ select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2
+ help
+ The FSL Primary Protected Application (PPA) is a software component
+ which is loaded during boot stage, and then remains resident in RAM
+ and runs in the TrustZone after boot. This is to load PPA during SPL
+ stage instead of the RAM version of U-Boot. Once PPA is initialized,
+ the rest of U-Boot (including RAM version) runs at EL2.
choice
prompt "FSL Layerscape PPA firmware loading-media select"
depends on FSL_LS_PPA
endchoice
-config SYS_LS_PPA_FW_ADDR
- hex "Address of PPA firmware loading from"
- depends on FSL_LS_PPA
- default 0x40500000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
- default 0x580a00000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
- default 0x60500000 if SYS_LS_PPA_FW_IN_XIP
- default 0x500000 if SYS_LS_PPA_FW_IN_MMC
- default 0x500000 if SYS_LS_PPA_FW_IN_NAND
-
- help
- If the PPA firmware locate at XIP flash, such as NOR or
- QSPI flash, this address is a directly memory-mapped.
- If it is in a serial accessed flash, such as NAND and SD
- card, it is a byte offset.
-
-config SYS_LS_PPA_ESBC_ADDR
- hex "hdr address of PPA firmware loading from"
- depends on FSL_LS_PPA && CHAIN_OF_TRUST
- default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
- default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
- default 0x40480000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
- default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3
+config LS_PPA_ESBC_HDR_SIZE
+ hex "Length of PPA ESBC header"
+ depends on FSL_LS_PPA && CHAIN_OF_TRUST && !SYS_LS_PPA_FW_IN_XIP
+ default 0x2000
help
- If the PPA header firmware locate at XIP flash, such as NOR or
- QSPI flash, this address is a directly memory-mapped.
- If it is in a serial accessed flash, such as NAND and SD
- card, it is a byte offset.
+ Length (in bytes) of PPA ESBC header to be copied from MMC/SD or
+ NAND to memory to validate PPA image.
endmenu
+config SYS_FSL_ERRATUM_A008997
+ bool "Workaround for USB PHY erratum A008997"
+
+config SYS_FSL_ERRATUM_A009007
+ bool
+ help
+ Workaround for USB PHY erratum A009007
+
+config SYS_FSL_ERRATUM_A009008
+ bool "Workaround for USB PHY erratum A009008"
+
+config SYS_FSL_ERRATUM_A009798
+ bool "Workaround for USB PHY erratum A009798"
+
config SYS_FSL_ERRATUM_A010315
bool "Workaround for PCIe erratum A010315"
config MAX_CPUS
int "Maximum number of CPUs permitted for Layerscape"
+ default 2 if ARCH_LS1028A
default 4 if ARCH_LS1043A
default 4 if ARCH_LS1046A
default 16 if ARCH_LS2080A
+ default 8 if ARCH_LS1088A
+ default 16 if ARCH_LX2160A
default 1
help
Set this number to the maximum number of possible CPUs in the SoC.
cores, count the reserved ports. This will allocate enough memory
in spin table to properly handle all cores.
+config EMC2305
+ bool "Fan controller"
+ help
+ Enable the EMC2305 fan controller for configuration of fan
+ speed.
+
config SECURE_BOOT
bool "Secure Boot"
help
But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
bus for those flashes to support the full QSPI flash size.
+config SYS_CCI400_OFFSET
+ hex "Offset for CCI400 base"
+ depends on SYS_FSL_HAS_CCI400
+ default 0x3090000 if ARCH_LS1088A || ARCH_LS1028A
+ default 0x180000 if FSL_LSCH2
+ help
+ Offset for CCI400 base
+ CCI400 base addr = CCSRBAR + CCI400_OFFSET
+
config SYS_FSL_IFC_BANK_COUNT
int "Maximum banks of Integrated flash controller"
- depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
+ depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || ARCH_LS1088A
default 4 if ARCH_LS1043A
default 4 if ARCH_LS1046A
- default 8 if ARCH_LS2080A
+ default 8 if ARCH_LS2080A || ARCH_LS1088A
+
+config SYS_FSL_HAS_CCI400
+ bool
+
+config SYS_FSL_HAS_CCN504
+ bool
+
+config SYS_FSL_HAS_CCN508
+ bool
config SYS_FSL_HAS_DP_DDR
bool
config SYS_FSL_SRDS_2
bool
+config SYS_NXP_SRDS_3
+ bool
+
config SYS_HAS_SERDES
bool
+config FSL_TZASC_1
+ bool
+
+config FSL_TZASC_2
+ bool
+
+config FSL_TZASC_400
+ bool
+
+config FSL_TZPC_BP147
+ bool
endmenu
menu "Layerscape clock tree configuration"
config SYS_FSL_PCLK_DIV
int "Platform clock divider"
+ default 1 if ARCH_LS1028A
default 1 if ARCH_LS1043A
default 1 if ARCH_LS1046A
+ default 1 if ARCH_LS1088A
default 2
help
This is the divider that is used to derive Platform clock from
default 2
help
This is the divider that is used to derive DSPI clock from Platform
- PLL, in another word DSPI_clk = Platform_PLL_freq / this_divider.
+ clock, in another word DSPI_clk = Platform_clk / this_divider.
config SYS_FSL_DUART_CLK_DIV
int "DUART clock divider"
default 1 if ARCH_LS1043A
+ default 4 if ARCH_LX2160A
default 2
help
This is the divider that is used to derive DUART clock from Platform
help
This is the divider that is used to derive SDHC clock from Platform
clock, in another word SDHC_clk = Platform_clk / this_divider.
+
+config SYS_FSL_QMAN_CLK_DIV
+ int "QMAN clock divider"
+ default 1 if ARCH_LS1043A
+ default 2
+ help
+ This is the divider that is used to derive QMAN clock from Platform
+ clock, in another word QMAN_clk = Platform_clk / this_divider.
endmenu
config RESV_RAM
be at the high end of physical memory. The reserve RAM may be
excluded from memory bank(s) passed to OS, or marked as reserved.
+config SYS_FSL_EC1
+ bool
+ help
+ Ethernet controller 1, this is connected to
+ MAC17 for LX2160A or to MAC3 for other SoCs
+ Provides DPAA2 capabilities
+
+config SYS_FSL_EC2
+ bool
+ help
+ Ethernet controller 2, this is connected to
+ MAC18 for LX2160A or to MAC4 for other SoCs
+ Provides DPAA2 capabilities
+
config SYS_FSL_ERRATUM_A008336
bool
config SYS_FSL_ERRATUM_A009929
bool
+
+config SYS_FSL_HAS_RGMII
+ bool
+ depends on SYS_FSL_EC1 || SYS_FSL_EC2
+
+
config SYS_MC_RSV_MEM_ALIGN
hex "Management Complex reserved memory alignment"
depends on RESV_RAM
- default 0x20000000
+ default 0x20000000 if ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A
help
Reserved memory needs to be aligned for MC to use. Default value
is 512MB.
+
+config SPL_LDSCRIPT
+ default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
+
+config HAS_FSL_XHCI_USB
+ bool
+ default y if ARCH_LS1043A || ARCH_LS1046A
+ help
+ For some SoC(such as LS1043A and LS1046A), USB and QE-HDLC multiplex use
+ pins, select it when the pins are assigned to USB.
+
+config TFABOOT
+ bool "Support for booting from TFA"
+ default n
+ help
+ Enabling this will make a U-Boot binary that is capable of being
+ booted via TFA.
projects / thirdparty / u-boot.git / blobdiff