arm/arm64: implement a boot header capability

[people/ms/u-boot.git] / arch / arm / cpu / armv8 / start.S

diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S
index b4eab0b0f281869afddc9f8677f95b4ae585780a..c1a2f456d532597b3083e3ece2bdf38bfb66eaec 100644 (file)
--- a/arch/arm/cpu/armv8/start.S
+++ b/arch/arm/cpu/armv8/start.S
@@ -7,7 +7,6 @@
 
 #include <asm-offsets.h>
 #include <config.h>
-#include <version.h>
 #include <linux/linkage.h>
 #include <asm/macro.h>
 #include <asm/armv8/mmu.h>
@@ -22,6 +21,16 @@
 _start:
        b       reset
 
+#ifdef CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK
+/*
+ * Various SoCs need something special and SoC-specific up front in
+ * order to boot, allow them to set that in their boot0.h file and then
+ * use it here.
+ */
+#include <asm/arch/boot0.h>
+ARM_SOC_BOOT0_HOOK
+#endif
+
        .align 3
 
 .globl _TEXT_BASE
@@ -44,6 +53,9 @@ _bss_end_ofs:
        .quad   __bss_end - _start
 
 reset:
+#ifdef CONFIG_SYS_RESET_SCTRL
+       bl reset_sctrl
+#endif
        /*
         * Could be EL3/EL2/EL1, Initial State:
         * Little Endian, MMU Disabled, i/dCache Disabled
@@ -55,8 +67,10 @@ reset:
        orr     x0, x0, #0xf                    /* SCR_EL3.NS|IRQ|FIQ|EA */
        msr     scr_el3, x0
        msr     cptr_el3, xzr                   /* Enable FP/SIMD */
+#ifdef COUNTER_FREQUENCY
        ldr     x0, =COUNTER_FREQUENCY
        msr     cntfrq_el0, x0                  /* Initialize CNTFRQ */
+#endif
        b       0f
 2:     msr     vbar_el2, x0
        mov     x0, #0x33ff
@@ -98,6 +112,39 @@ master_cpu:
 
        bl      _main
 
+#ifdef CONFIG_SYS_RESET_SCTRL
+reset_sctrl:
+       switch_el x1, 3f, 2f, 1f
+3:
+       mrs     x0, sctlr_el3
+       b       0f
+2:
+       mrs     x0, sctlr_el2
+       b       0f
+1:
+       mrs     x0, sctlr_el1
+
+0:
+       ldr     x1, =0xfdfffffa
+       and     x0, x0, x1
+
+       switch_el x1, 6f, 5f, 4f
+6:
+       msr     sctlr_el3, x0
+       b       7f
+5:
+       msr     sctlr_el2, x0
+       b       7f
+4:
+       msr     sctlr_el1, x0
+
+7:
+       dsb     sy
+       isb
+       b       __asm_invalidate_tlb_all
+       ret
+#endif
+
 /*-----------------------------------------------------------------------*/
 
 WEAK(apply_core_errata)
@@ -116,18 +163,37 @@ apply_a57_core_errata:
 #ifdef CONFIG_ARM_ERRATA_828024
        mrs     x0, S3_1_c15_c2_0       /* cpuactlr_el1 */
        /* Disable non-allocate hint of w-b-n-a memory type */
-       mov     x0, #0x1 << 49
+       orr     x0, x0, #1 << 49
        /* Disable write streaming no L1-allocate threshold */
-       mov     x0, #0x3 << 25
+       orr     x0, x0, #3 << 25
        /* Disable write streaming no-allocate threshold */
-       mov     x0, #0x3 << 27
+       orr     x0, x0, #3 << 27
        msr     S3_1_c15_c2_0, x0       /* cpuactlr_el1 */
 #endif
 
 #ifdef CONFIG_ARM_ERRATA_826974
        mrs     x0, S3_1_c15_c2_0       /* cpuactlr_el1 */
        /* Disable speculative load execution ahead of a DMB */
-       mov     x0, #0x1 << 59
+       orr     x0, x0, #1 << 59
+       msr     S3_1_c15_c2_0, x0       /* cpuactlr_el1 */
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_833471
+       mrs     x0, S3_1_c15_c2_0       /* cpuactlr_el1 */
+       /* FPSCR write flush.
+        * Note that in some cases where a flush is unnecessary this
+           could impact performance. */
+       orr     x0, x0, #1 << 38
+       msr     S3_1_c15_c2_0, x0       /* cpuactlr_el1 */
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_829520
+       mrs     x0, S3_1_c15_c2_0       /* cpuactlr_el1 */
+       /* Disable Indirect Predictor bit will prevent this erratum
+           from occurring
+        * Note that in some cases where a flush is unnecessary this
+           could impact performance. */
+       orr     x0, x0, #1 << 4
        msr     S3_1_c15_c2_0, x0       /* cpuactlr_el1 */
 #endif
 
@@ -145,15 +211,6 @@ ENDPROC(apply_core_errata)
 WEAK(lowlevel_init)
        mov     x29, lr                 /* Save LR */
 
-#ifndef CONFIG_ARMV8_MULTIENTRY
-       /*
-        * For single-entry systems the lowlevel init is very simple.
-        */
-       ldr     x0, =GICD_BASE
-       bl      gic_init_secure
-
-#else /* CONFIG_ARMV8_MULTIENTRY is set */
-
 #if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
        branch_if_slave x0, 1f
        ldr     x0, =GICD_BASE
@@ -169,6 +226,7 @@ WEAK(lowlevel_init)
 #endif
 #endif
 
+#ifdef CONFIG_ARMV8_MULTIENTRY
        branch_if_master x0, x1, 2f
 
        /*