arm: zynq: Add board support for cc108

[people/ms/u-boot.git] / arch / arm / dts / exynos5250-spring.dts

diff --git a/arch/arm/dts/exynos5250-spring.dts b/arch/arm/dts/exynos5250-spring.dts
index 81b3d29f9cf032d962f1e41c8dc0168e8079d654..693501e4c19ca8d7cf95aa798d97e12e4026be5d 100644 (file)
--- a/arch/arm/dts/exynos5250-spring.dts
+++ b/arch/arm/dts/exynos5250-spring.dts
@@ -158,6 +158,27 @@
                samsung,ycbcr-coeff = <0>;
                samsung,color-depth = <1>;
        };
+
+       backlight: backlight {
+               compatible = "pwm-backlight";
+               pwms = <&pwm 0 1000000 0>;
+               brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+               default-brightness-level = <1>;
+               enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+               power-supply = <&fet1>;
+       };
+
+       panel: panel {
+               compatible = "auo,b116xw03";
+               power-supply = <&fet6>;
+               backlight = <&backlight>;
+
+               port {
+                       panel_in: endpoint {
+                               remote-endpoint = <&bridge_out>;
+                       };
+               };
+       };
 };
 
 &i2c_0 {
@@ -385,6 +406,25 @@
        };
 };
 
+&dp {
+       status = "okay";
+       samsung,color-space = <0>;
+       samsung,dynamic-range = <0>;
+       samsung,ycbcr-coeff = <0>;
+       samsung,color-depth = <1>;
+       samsung,link-rate = <0x0a>;
+       samsung,lane-count = <1>;
+       samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
+
+       ports {
+               port@0 {
+                       dp_out: endpoint {
+                               remote-endpoint = <&bridge_in>;
+                       };
+               };
+       };
+};
+
 &i2c_1 {
        status = "okay";
        samsung,i2c-sda-delay = <100>;
@@ -585,6 +625,19 @@
                        0x04 0x59 0x60 /* MPU Clock source: LC => RCO */
                        0x04 0x54 0x14 /* LC -> RCO */
                        0x02 0xa1 0x91>; /* HPD high */
+               ports {
+                       port@0 {
+                               bridge_out: endpoint {
+                                       remote-endpoint = <&panel_in>;
+                               };
+                       };
+
+                       port@1 {
+                               bridge_in: endpoint {
+                                       remote-endpoint = <&dp_out>;
+                               };
+                       };
+               };
        };
 
        soundcodec@20 {