struct omap_sys_ctrl_regs const **ctrl =
(struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL;
-/* OPP HIGH FREQUENCY for ES2.0 */
-static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = {
- {125, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {625, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {625, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {750, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {625, 15, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
/* OPP NOM FREQUENCY for ES1.0 */
static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = {
{200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
{375, 17, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
};
-/* OPP LOW FREQUENCY for ES1.0 */
-static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = {
- {200, 2, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {1000, 20, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {375, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {400, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {375, 17, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-/* OPP LOW FREQUENCY for ES2.0 */
-static const struct dpll_params mpu_dpll_params_499mhz[NUM_SYS_CLKS] = {
- {499, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {297, 9, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {493, 18, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {499, 25, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {493, 37, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
/* OPP NOM FREQUENCY for OMAP5 ES2.0, and DRA7 ES1.0 */
static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = {
{250, 2, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
{277, 9, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 38.4 MHz */
};
-static const struct dpll_params
- core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = {
- {266, 2, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {443, 6, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 16.8 MHz */
- {277, 4, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 19.2 MHz */
- {368, 8, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {277, 9, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1} /* 38.4 MHz */
-};
-
-static const struct dpll_params
- core_dpll_params_2128mhz_ddr266_es2[NUM_SYS_CLKS] = {
- {266, 2, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {443, 6, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 16.8 MHz */
- {277, 4, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 19.2 MHz */
- {368, 8, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {277, 9, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12} /* 38.4 MHz */
-};
-
static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = {
{32, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
{10, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 38.4 MHz */
};
+static const struct dpll_params per_dpll_params_768mhz_dra76x[NUM_SYS_CLKS] = {
+ {32, 0, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 12 MHz */
+ {96, 4, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 20 MHz */
+ {160, 6, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 16.8 MHz */
+ {20, 0, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 19.2 MHz */
+ {192, 12, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {10, 0, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 38.4 MHz */
+};
+
static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
{1165, 11, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
};
/* ABE M & N values with sys_clk as source */
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
static const struct dpll_params
abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
{49, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
{64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
};
+#endif
/* ABE M & N values with 32K clock as source */
+#ifndef CONFIG_SYS_OMAP_ABE_SYSCK
static const struct dpll_params abe_dpll_params_32k_196608khz = {
750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
};
+#endif
/* ABE M & N values with sysclk2(22.5792 MHz) as input */
static const struct dpll_params
.ddr = NULL
};
+struct dplls dra76x_dplls = {
+ .mpu = mpu_dpll_params_1ghz,
+ .core = core_dpll_params_2128mhz_dra7xx,
+ .per = per_dpll_params_768mhz_dra76x,
+ .abe = abe_dpll_params_sysclk2_361267khz,
+ .iva = iva_dpll_params_2330mhz_dra7xx,
+ .usb = usb_dpll_params_1920mhz,
+ .ddr = ddr_dpll_params_2664mhz,
+ .gmac = gmac_dpll_params_2000mhz,
+};
+
struct dplls dra7xx_dplls = {
.mpu = mpu_dpll_params_1ghz,
.core = core_dpll_params_2128mhz_dra7xx,
.gpio_en = 0,
};
+/* The LP87565*/
+struct pmic_data lp87565 = {
+ .base_offset = LP873X_BUCK_BASE_VOLT_UV,
+ .step = 5000, /* 5 mV represented in uV */
+ /*
+ * Offset codes 0 - 0x13 Invalid.
+ * Offset codes 0x14 0x17 give 10mV steps
+ * Offset codes 0x17 through 0x9D give 5mV steps
+ * So let us start with our operating range from .73V
+ */
+ .start_code = 0x17,
+ .i2c_slave_addr = 0x60,
+ .pmic_bus_init = gpi2c_init,
+ .pmic_write = palmas_i2c_write_u8,
+};
+
+/* The LP8732 and LP8733 are software-compatible, use common struct */
+struct pmic_data lp8733 = {
+ .base_offset = LP873X_BUCK_BASE_VOLT_UV,
+ .step = 5000, /* 5 mV represented in uV */
+ /*
+ * Offset codes 0 - 0x13 Invalid.
+ * Offset codes 0x14 0x17 give 10mV steps
+ * Offset codes 0x17 through 0x9D give 5mV steps
+ * So let us start with our operating range from .73V
+ */
+ .start_code = 0x17,
+ .i2c_slave_addr = 0x60,
+ .pmic_bus_init = gpi2c_init,
+ .pmic_write = palmas_i2c_write_u8,
+};
+
struct vcores_data omap5430_volts = {
- .mpu.value = VDD_MPU,
+ .mpu.value[OPP_NOM] = VDD_MPU,
.mpu.addr = SMPS_REG_ADDR_12_MPU,
.mpu.pmic = &palmas,
- .core.value = VDD_CORE,
+ .core.value[OPP_NOM] = VDD_CORE,
.core.addr = SMPS_REG_ADDR_8_CORE,
.core.pmic = &palmas,
- .mm.value = VDD_MM,
+ .mm.value[OPP_NOM] = VDD_MM,
.mm.addr = SMPS_REG_ADDR_45_IVA,
.mm.pmic = &palmas,
};
struct vcores_data omap5430_volts_es2 = {
- .mpu.value = VDD_MPU_ES2,
+ .mpu.value[OPP_NOM] = VDD_MPU_ES2,
.mpu.addr = SMPS_REG_ADDR_12_MPU,
.mpu.pmic = &palmas,
.mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
- .core.value = VDD_CORE_ES2,
+ .core.value[OPP_NOM] = VDD_CORE_ES2,
.core.addr = SMPS_REG_ADDR_8_CORE,
.core.pmic = &palmas,
- .mm.value = VDD_MM_ES2,
+ .mm.value[OPP_NOM] = VDD_MM_ES2,
.mm.addr = SMPS_REG_ADDR_45_IVA,
.mm.pmic = &palmas,
.mm.abb_tx_done_mask = OMAP_ABB_MM_TXDONE_MASK,
+
+ .mpu.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_MPU_OPNO_VMIN,
+ .mpu.efuse.reg_bits = OMAP5_ES2_PROD_REGBITS,
+
+ .core.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_CORE_OPNO_VMIN,
+ .core.efuse.reg_bits = OMAP5_ES2_PROD_REGBITS,
+
+ .mm.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_MM_OPNO_VMIN,
+ .mm.efuse.reg_bits = OMAP5_ES2_PROD_REGBITS,
};
/*
(*prcm)->cm_l4per_gpio6_clkctrl,
(*prcm)->cm_l4per_gpio7_clkctrl,
(*prcm)->cm_l4per_gpio8_clkctrl,
+#ifdef CONFIG_SCSI_AHCI_PLAT
+ (*prcm)->cm_l3init_ocp2scp3_clkctrl,
+#endif
0
};
#ifdef CONFIG_TI_QSPI
(*prcm)->cm_l4per_qspi_clkctrl,
+#endif
+#ifdef CONFIG_SCSI_AHCI_PLAT
+ (*prcm)->cm_l3init_sata_clkctrl,
#endif
0
};
setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24));
#endif
+#ifdef CONFIG_SCSI_AHCI_PLAT
+ /* Enable optional functional clock for SATA */
+ setbits_le32((*prcm)->cm_l3init_sata_clkctrl,
+ SATA_CLKCTRL_OPTFCLKEN_MASK);
+#endif
+
/* Enable SCRM OPT clocks for PER and CORE dpll */
setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
OPTFCLKEN_SCRM_PER_MASK);
void enable_basic_uboot_clocks(void)
{
u32 const clk_domains_essential[] = {
-#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+#if defined(CONFIG_DRA7XX)
(*prcm)->cm_ipu_clkstctrl,
#endif
0
(*prcm)->cm_l4per_i2c2_clkctrl,
(*prcm)->cm_l4per_i2c3_clkctrl,
(*prcm)->cm_l4per_i2c4_clkctrl,
-#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+#if defined(CONFIG_DRA7XX)
(*prcm)->cm_ipu_i2c5_clkctrl,
#else
(*prcm)->cm_l4per_i2c5_clkctrl,
*ctrl = &omap5_ctrl;
break;
+ case DRA762_ES1_0:
+ *prcm = &dra7xx_prcm;
+ *dplls_data = &dra76x_dplls;
+ *ctrl = &dra7xx_ctrl;
+ break;
+
case DRA752_ES1_0:
case DRA752_ES1_1:
case DRA752_ES2_0:
case DRA752_ES1_0:
case DRA752_ES1_1:
case DRA752_ES2_0:
+ case DRA762_ES1_0:
*regs = &ioregs_dra7xx_es1;
break;
case DRA722_ES1_0:
projects / people / ms / u-boot.git / blobdiff