/*
- * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2010-2015, NVIDIA CORPORATION. All rights reserved.
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ * SPDX-License-Identifier: GPL-2.0
*/
/* Tegra SoC common clock control functions */
19200000,
12000000,
26000000,
+ 38400000,
+ 48000000,
};
/* return 1 if a peripheral ID is in range */
u32 *divp, u32 *cpcon, u32 *lfcon)
{
struct clk_pll *pll = get_pll(clkid);
+ struct clk_pll_info *pllinfo = &tegra_pll_info_table[clkid];
u32 data;
assert(clkid != CLOCK_ID_USB);
if (!clock_id_is_pll(clkid) || clkid == CLOCK_ID_USB)
return -1;
data = readl(&pll->pll_base);
- *divm = (data & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
- *divn = (data & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT;
- *divp = (data & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
+ *divm = (data >> pllinfo->m_shift) & pllinfo->m_mask;
+ *divn = (data >> pllinfo->n_shift) & pllinfo->n_mask;
+ *divp = (data >> pllinfo->p_shift) & pllinfo->p_mask;
data = readl(&pll->pll_misc);
- *cpcon = (data & PLL_CPCON_MASK) >> PLL_CPCON_SHIFT;
- *lfcon = (data & PLL_LFCON_MASK) >> PLL_LFCON_SHIFT;
+ /* NOTE: On T210, cpcon/lfcon no longer exist, moved to KCP/KVCO */
+ *cpcon = (data >> pllinfo->kcp_shift) & pllinfo->kcp_mask;
+ *lfcon = (data >> pllinfo->kvco_shift) & pllinfo->kvco_mask;
return 0;
}
u32 divp, u32 cpcon, u32 lfcon)
{
struct clk_pll *pll = NULL;
+ struct clk_pll_info *pllinfo = &tegra_pll_info_table[clkid];
+ struct clk_pll_simple *simple_pll = NULL;
u32 misc_data, data;
- if (clkid < (enum clock_id)TEGRA_CLK_PLLS)
+ if (clkid < (enum clock_id)TEGRA_CLK_PLLS) {
pll = get_pll(clkid);
+ } else {
+ simple_pll = clock_get_simple_pll(clkid);
+ if (!simple_pll) {
+ debug("%s: Uknown simple PLL %d\n", __func__, clkid);
+ return 0;
+ }
+ }
/*
- * We cheat by treating all PLL (except PLLU) in the same fashion.
- * This works only because:
- * - same fields are always mapped at same offsets, except DCCON
- * - DCCON is always 0, doesn't conflict
- * - M,N, P of PLLP values are ignored for PLLP
+ * pllinfo has the m/n/p and kcp/kvco mask and shift
+ * values for all of the PLLs used in U-Boot, with any
+ * SoC differences accounted for.
+ *
+ * Preserve EN_LOCKDET, etc.
*/
- misc_data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT);
+ if (pll)
+ misc_data = readl(&pll->pll_misc);
+ else
+ misc_data = readl(&simple_pll->pll_misc);
+ misc_data &= ~(pllinfo->kcp_mask << pllinfo->kcp_shift);
+ misc_data |= cpcon << pllinfo->kcp_shift;
+ misc_data &= ~(pllinfo->kvco_mask << pllinfo->kvco_shift);
+ misc_data |= lfcon << pllinfo->kvco_shift;
- data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) |
- (0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT);
+ data = (divm << pllinfo->m_shift) | (divn << pllinfo->n_shift);
+ data |= divp << pllinfo->p_shift;
+ data |= (1 << PLL_ENABLE_SHIFT); /* BYPASS s/b 0 already */
- if (clkid == CLOCK_ID_USB)
- data |= divp << PLLU_VCO_FREQ_SHIFT;
- else
- data |= divp << PLL_DIVP_SHIFT;
if (pll) {
writel(misc_data, &pll->pll_misc);
writel(data, &pll->pll_base);
} else {
- struct clk_pll_simple *pll = clock_get_simple_pll(clkid);
-
- if (!pll) {
- debug("%s: Uknown simple PLL %d\n", __func__, clkid);
- return 0;
- }
- writel(misc_data, &pll->pll_misc);
- writel(data, &pll->pll_base);
+ writel(misc_data, &simple_pll->pll_misc);
+ writel(data, &simple_pll->pll_base);
}
/* calculate the stable time */
writel(mask, &clkrst->crc_cpu_cmplx_clr);
}
+unsigned int __weak clk_m_get_rate(unsigned int parent_rate)
+{
+ return parent_rate;
+}
+
unsigned clock_get_rate(enum clock_id clkid)
{
struct clk_pll *pll;
- u32 base;
- u32 divm;
- u64 parent_rate;
- u64 rate;
+ u32 base, divm;
+ u64 parent_rate, rate;
+ struct clk_pll_info *pllinfo = &tegra_pll_info_table[clkid];
parent_rate = osc_freq[clock_get_osc_freq()];
if (clkid == CLOCK_ID_OSC)
return parent_rate;
+ if (clkid == CLOCK_ID_CLK_M)
+ return clk_m_get_rate(parent_rate);
+
pll = get_pll(clkid);
if (!pll)
return 0;
base = readl(&pll->pll_base);
- /* Oh for bf_unpack()... */
- rate = parent_rate * ((base & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT);
- divm = (base & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
- if (clkid == CLOCK_ID_USB)
- divm <<= (base & PLLU_VCO_FREQ_MASK) >> PLLU_VCO_FREQ_SHIFT;
- else
- divm <<= (base & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
+ rate = parent_rate * ((base >> pllinfo->n_shift) & pllinfo->n_mask);
+ divm = (base >> pllinfo->m_shift) & pllinfo->m_mask;
+ /*
+ * PLLU uses p_mask/p_shift for VCO on all but T210,
+ * T210 uses normal DIVP. Handled in pllinfo table.
+ */
+#ifdef CONFIG_TEGRA210
+ /*
+ * PLLP's primary output (pllP_out0) on T210 is the VCO, and divp is
+ * not applied. pllP_out2 does have divp applied. All other pllP_outN
+ * are divided down from pllP_out0. We only support pllP_out0 in
+ * U-Boot at the time of writing this comment.
+ */
+ if (clkid != CLOCK_ID_PERIPH)
+#endif
+ divm <<= (base >> pllinfo->p_shift) & pllinfo->p_mask;
do_div(rate, divm);
return rate;
}
* @param p post divider(DIVP)
* @param cpcon base PLL charge pump(CPCON)
* @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
- * be overriden), 1 if PLL is already correct
+ * be overridden), 1 if PLL is already correct
*/
int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
{
- u32 base_reg;
- u32 misc_reg;
+ u32 base_reg, misc_reg;
struct clk_pll *pll;
+ struct clk_pll_info *pllinfo = &tegra_pll_info_table[clkid];
pll = get_pll(clkid);
base_reg = readl(&pll->pll_base);
/* Set BYPASS, m, n and p to PLL_BASE */
- base_reg &= ~PLL_DIVM_MASK;
- base_reg |= m << PLL_DIVM_SHIFT;
+ base_reg &= ~(pllinfo->m_mask << pllinfo->m_shift);
+ base_reg |= m << pllinfo->m_shift;
- base_reg &= ~PLL_DIVN_MASK;
- base_reg |= n << PLL_DIVN_SHIFT;
+ base_reg &= ~(pllinfo->n_mask << pllinfo->n_shift);
+ base_reg |= n << pllinfo->n_shift;
- base_reg &= ~PLL_DIVP_MASK;
- base_reg |= p << PLL_DIVP_SHIFT;
+ base_reg &= ~(pllinfo->p_mask << pllinfo->p_shift);
+ base_reg |= p << pllinfo->p_shift;
if (clkid == CLOCK_ID_PERIPH) {
/*
base_reg |= PLL_BYPASS_MASK;
writel(base_reg, &pll->pll_base);
- /* Set cpcon to PLL_MISC */
+ /* Set cpcon (KCP) to PLL_MISC */
misc_reg = readl(&pll->pll_misc);
- misc_reg &= ~PLL_CPCON_MASK;
- misc_reg |= cpcon << PLL_CPCON_SHIFT;
+ misc_reg &= ~(pllinfo->kcp_mask << pllinfo->kcp_shift);
+ misc_reg |= cpcon << pllinfo->kcp_shift;
writel(misc_reg, &pll->pll_misc);
/* Enable PLL */
reset_set_enable(periph_id, 0);
}
-#ifdef CONFIG_OF_CONTROL
+#if CONFIG_IS_ENABLED(OF_CONTROL)
int clock_decode_periph_id(const void *blob, int node)
{
enum periph_id id;
assert(clock_periph_id_isvalid(id));
return id;
}
-#endif /* CONFIG_OF_CONTROL */
+#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
int clock_verify(void)
{
void clock_init(void)
{
+ int i;
+
+ pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL);
pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY);
pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH);
- pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL);
+ pll_rate[CLOCK_ID_USB] = clock_get_rate(CLOCK_ID_USB);
pll_rate[CLOCK_ID_DISPLAY] = clock_get_rate(CLOCK_ID_DISPLAY);
- pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
- pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
pll_rate[CLOCK_ID_XCPU] = clock_get_rate(CLOCK_ID_XCPU);
+ pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
+ pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
+ pll_rate[CLOCK_ID_CLK_M] = clock_get_rate(CLOCK_ID_CLK_M);
+
debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
+ debug("CLKM = %d\n", pll_rate[CLOCK_ID_CLK_M]);
+ debug("PLLC = %d\n", pll_rate[CLOCK_ID_CGENERAL]);
debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
- debug("PLLC = %d\n", pll_rate[CLOCK_ID_CGENERAL]);
+ debug("PLLU = %d\n", pll_rate[CLOCK_ID_USB]);
debug("PLLD = %d\n", pll_rate[CLOCK_ID_DISPLAY]);
debug("PLLX = %d\n", pll_rate[CLOCK_ID_XCPU]);
- /* Do any special system timer/TSC setup */
-#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
- if (!tegra_cpu_is_non_secure())
-#endif
- arch_timer_init();
+ for (i = 0; periph_clk_init_table[i].periph_id != -1; i++) {
+ enum periph_id periph_id;
+ enum clock_id parent;
+ int source, mux_bits, divider_bits;
+
+ periph_id = periph_clk_init_table[i].periph_id;
+ parent = periph_clk_init_table[i].parent_clock_id;
+
+ source = get_periph_clock_source(periph_id, parent, &mux_bits,
+ ÷r_bits);
+ clock_ll_set_source_bits(periph_id, mux_bits, source);
+ }
}
static void set_avp_clock_source(u32 src)
/*
* This function is useful on Tegra30, and any later SoCs that have compatible
* PLLP configuration registers.
+ * NOTE: Not used on Tegra210 - see tegra210_setup_pllp in T210 clock.c
*/
void tegra30_set_up_pllp(void)
{
projects / people / ms / u-boot.git / blobdiff