config SYS_ARCH
default "mips"
-config USE_PRIVATE_LIBGCC
- default y
+config SYS_CPU
+ default "mips32" if CPU_MIPS32
+ default "mips64" if CPU_MIPS64
choice
prompt "Target select"
+ optional
config TARGET_QEMU_MIPS
bool "Support qemu-mips"
select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
+ select SUPPORTS_CPU_MIPS64_R1
+ select SUPPORTS_CPU_MIPS64_R2
config TARGET_MALTA
bool "Support malta"
+ select DYNAMIC_IO_PORT_BASE
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
+ select SUPPORTS_CPU_MIPS32_R6
+ select SWAP_IO_SPACE
+ select MIPS_L1_CACHE_SHIFT_6
config TARGET_VCT
bool "Support vct"
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
+ select SYS_MIPS_CACHE_INIT_RAM_LOAD
config TARGET_DBAU1X00
bool "Support dbau1x00"
select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
+ select SYS_MIPS_CACHE_INIT_RAM_LOAD
+ select MIPS_TUNE_4KC
config TARGET_PB1X00
bool "Support pb1x00"
select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
+ select SYS_MIPS_CACHE_INIT_RAM_LOAD
+ select MIPS_TUNE_4KC
-config TARGET_QEMU_MIPS64
- bool "Support qemu-mips64"
- select SUPPORTS_BIG_ENDIAN
- select SUPPORTS_LITTLE_ENDIAN
- select SUPPORTS_CPU_MIPS64_R1
- select SUPPORTS_CPU_MIPS64_R2
+config ARCH_ATH79
+ bool "Support QCA/Atheros ath79"
+ select OF_CONTROL
+ select DM
+
+config MACH_PIC32
+ bool "Support Microchip PIC32"
+ select OF_CONTROL
+ select DM
endchoice
source "board/micronas/vct/Kconfig"
source "board/pb1x00/Kconfig"
source "board/qemu-mips/Kconfig"
+source "arch/mips/mach-ath79/Kconfig"
+source "arch/mips/mach-pic32/Kconfig"
if MIPS
depends on SUPPORTS_CPU_MIPS32_R1
select 32BIT
help
- Choose this option to build an U-Boot for release 1 or later of the
+ Choose this option to build an U-Boot for release 1 through 5 of the
MIPS32 architecture.
config CPU_MIPS32_R2
depends on SUPPORTS_CPU_MIPS32_R2
select 32BIT
help
- Choose this option to build an U-Boot for release 2 or later of the
+ Choose this option to build an U-Boot for release 2 through 5 of the
+ MIPS32 architecture.
+
+config CPU_MIPS32_R6
+ bool "MIPS32 Release 6"
+ depends on SUPPORTS_CPU_MIPS32_R6
+ select 32BIT
+ help
+ Choose this option to build an U-Boot for release 6 or later of the
MIPS32 architecture.
config CPU_MIPS64_R1
depends on SUPPORTS_CPU_MIPS64_R1
select 64BIT
help
- Choose this option to build a kernel for release 1 or later of the
+ Choose this option to build a kernel for release 1 through 5 of the
MIPS64 architecture.
config CPU_MIPS64_R2
depends on SUPPORTS_CPU_MIPS64_R2
select 64BIT
help
- Choose this option to build a kernel for release 2 or later of the
+ Choose this option to build a kernel for release 2 through 5 of the
+ MIPS64 architecture.
+
+config CPU_MIPS64_R6
+ bool "MIPS64 Release 6"
+ depends on SUPPORTS_CPU_MIPS64_R6
+ select 64BIT
+ help
+ Choose this option to build a kernel for release 6 or later of the
MIPS64 architecture.
endchoice
+menu "OS boot interface"
+
+config MIPS_BOOT_CMDLINE_LEGACY
+ bool "Hand over legacy command line to Linux kernel"
+ default y
+ help
+ Enable this option if you want U-Boot to hand over the Yamon-style
+ command line to the kernel. All bootargs will be prepared as argc/argv
+ compatible list. The argument count (argc) is stored in register $a0.
+ The address of the argument list (argv) is stored in register $a1.
+
+config MIPS_BOOT_ENV_LEGACY
+ bool "Hand over legacy environment to Linux kernel"
+ default y
+ help
+ Enable this option if you want U-Boot to hand over the Yamon-style
+ environment to the kernel. Information like memory size, initrd
+ address and size will be prepared as zero-terminated key/value list.
+ The address of the environment is stored in register $a2.
+
+config MIPS_BOOT_FDT
+ bool "Hand over a flattened device tree to Linux kernel"
+ default n
+ help
+ Enable this option if you want U-Boot to hand over a flattened
+ device tree to the kernel. According to UHI register $a0 will be set
+ to -2 and the FDT address is stored in $a1.
+
+endmenu
+
config SUPPORTS_BIG_ENDIAN
bool
config SUPPORTS_CPU_MIPS32_R2
bool
+config SUPPORTS_CPU_MIPS32_R6
+ bool
+
config SUPPORTS_CPU_MIPS64_R1
bool
config SUPPORTS_CPU_MIPS64_R2
bool
+config SUPPORTS_CPU_MIPS64_R6
+ bool
+
+config CPU_MIPS32
+ bool
+ default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R6
+
+config CPU_MIPS64
+ bool
+ default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R6
+
+config MIPS_TUNE_4KC
+ bool
+
+config MIPS_TUNE_14KC
+ bool
+
+config MIPS_TUNE_24KC
+ bool
+
+config MIPS_TUNE_74KC
+ bool
+
config 32BIT
bool
config 64BIT
bool
+config SWAP_IO_SPACE
+ bool
+
+config SYS_MIPS_CACHE_INIT_RAM_LOAD
+ bool
+
+config MIPS_L1_CACHE_SHIFT_4
+ bool
+
+config MIPS_L1_CACHE_SHIFT_5
+ bool
+
+config MIPS_L1_CACHE_SHIFT_6
+ bool
+
+config MIPS_L1_CACHE_SHIFT_7
+ bool
+
+config MIPS_L1_CACHE_SHIFT
+ int
+ default "7" if MIPS_L1_CACHE_SHIFT_7
+ default "6" if MIPS_L1_CACHE_SHIFT_6
+ default "5" if MIPS_L1_CACHE_SHIFT_5
+ default "4" if MIPS_L1_CACHE_SHIFT_4
+ default "5"
+
+config DYNAMIC_IO_PORT_BASE
+ bool
+
endif
endmenu
projects / people / ms / u-boot.git / blobdiff