mpc8260: remove atc board support

[people/ms/u-boot.git] / arch / powerpc / cpu / mpc824x / cpu_init.c

diff --git a/arch/powerpc/cpu/mpc824x/cpu_init.c b/arch/powerpc/cpu/mpc824x/cpu_init.c
index 47ac18e757cee98a3e525121aa9df7874f3619e9..68d88e910cbd8ee430110b36662d4f7e88c603bb 100644 (file)
--- a/arch/powerpc/cpu/mpc824x/cpu_init.c
+++ b/arch/powerpc/cpu/mpc824x/cpu_init.c
@@ -46,8 +46,6 @@
 void
 cpu_init_f (void)
 {
-/* MOUSSE board is initialized in asm */
-#if !defined(CONFIG_MOUSSE)
     register unsigned long val;
     CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/
 /*    CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/
@@ -302,98 +300,12 @@ cpu_init_f (void)
        CONFIG_READ_WORD(MCCR1, val);
        CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */
        __asm__ __volatile__("eieio");
-
-#endif /* !CONFIG_MOUSSE */
 }
 
-
-#ifdef CONFIG_MOUSSE
-#ifdef INCLUDE_MPC107_REPORT
-struct MPC107_s {
-       unsigned int iobase;
-       char desc[120];
-} MPC107Regs[] = {
-       { BMC_BASE +  0x00, "MPC107 Vendor/Device ID"           },
-       { BMC_BASE +  0x04, "MPC107 PCI Command/Status Register" },
-       { BMC_BASE +  0x08, "MPC107 Revision"                   },
-       { BMC_BASE +  0x0C, "MPC107 Cache Line Size"            },
-       { BMC_BASE +  0x10, "MPC107 LMBAR"                      },
-       { BMC_BASE +  0x14, "MPC824x PCSR"                      },
-       { BMC_BASE +  0xA8, "MPC824x PICR1"                     },
-       { BMC_BASE +  0xAC, "MPC824x PICR2"                     },
-       { BMC_BASE +  0x46, "MPC824x PACR"                      },
-       { BMC_BASE + 0x310, "MPC824x ITWR"                      },
-       { BMC_BASE + 0x300, "MPC824x OMBAR"                     },
-       { BMC_BASE + 0x308, "MPC824x OTWR"                      },
-       { BMC_BASE +  0x14, "MPC107 Peripheral Control and Status Register" },
-       { BMC_BASE + 0x78, "MPC107 EUMBAR"                      },
-       { BMC_BASE + 0xC0, "MPC107 Processor Bus Error Status"  },
-       { BMC_BASE + 0xC4, "MPC107 PCI Bus Error Status"        },
-       { BMC_BASE + 0xC8, "MPC107 Processor/PCI Error Address" },
-       { BMC_BASE + 0xE0, "MPC107 AMBOR Register"              },
-       { BMC_BASE + 0xF0, "MPC107 MCCR1 Register"              },
-       { BMC_BASE + 0xF4, "MPC107 MCCR2 Register"              },
-       { BMC_BASE + 0xF8, "MPC107 MCCR3 Register"              },
-       { BMC_BASE + 0xFC, "MPC107 MCCR4 Register"              },
-};
-#define N_MPC107_Regs  (sizeof(MPC107Regs)/sizeof(MPC107Regs[0]))
-#endif /* INCLUDE_MPC107_REPORT */
-#endif /* CONFIG_MOUSSE */
-
 /*
  * initialize higher level parts of CPU like time base and timers
  */
 int cpu_init_r (void)
 {
-#ifdef CONFIG_MOUSSE
-#ifdef INCLUDE_MPC107_REPORT
-       unsigned int tmp = 0, i;
-#endif
-       /*
-        * Initialize the EUMBBAR (Embedded Util Mem Block Base Addr Reg).
-        * This is necessary before the EPIC, DMA ctlr, I2C ctlr, etc. can
-        * be accessed.
-        */
-
-#ifdef CONFIG_MPC8240                  /* only on MPC8240 */
-       mpc824x_mpc107_setreg (EUMBBAR, EUMBBAR_VAL);
-       /* MOT/SPS: Issue #10002, PCI (FD Alias enable) */
-       mpc824x_mpc107_setreg (AMBOR, 0x000000C0);
-#endif
-
-
-#ifdef INCLUDE_MPC107_REPORT
-       /* Check MPC824x PCI Device and Vendor ID */
-       while ((tmp = mpc824x_mpc107_getreg (BMC_BASE)) != 0x31057) {
-               printf ("       MPC107: offset=0x%x, val = 0x%x\n",
-                       BMC_BASE,
-                       tmp);
-       }
-
-       for (i = 0; i < N_MPC107_Regs; i++) {
-               printf ("       0x%x/%s = 0x%x\n",
-                       MPC107Regs[i].iobase,
-                       MPC107Regs[i].desc,
-                       mpc824x_mpc107_getreg (MPC107Regs[i].iobase));
-       }
-
-       printf ("IBAT0L = 0x%08X\n", mfspr (IBAT0L));
-       printf ("IBAT0U = 0x%08X\n", mfspr (IBAT0U));
-       printf ("IBAT1L = 0x%08X\n", mfspr (IBAT1L));
-       printf ("IBAT1U = 0x%08X\n", mfspr (IBAT1U));
-       printf ("IBAT2L = 0x%08X\n", mfspr (IBAT2L));
-       printf ("IBAT2U = 0x%08X\n", mfspr (IBAT2U));
-       printf ("IBAT3L = 0x%08X\n", mfspr (IBAT3L));
-       printf ("IBAT3U = 0x%08X\n", mfspr (IBAT3U));
-       printf ("DBAT0L = 0x%08X\n", mfspr (DBAT0L));
-       printf ("DBAT0U = 0x%08X\n", mfspr (DBAT0U));
-       printf ("DBAT1L = 0x%08X\n", mfspr (DBAT1L));
-       printf ("DBAT1U = 0x%08X\n", mfspr (DBAT1U));
-       printf ("DBAT2L = 0x%08X\n", mfspr (DBAT2L));
-       printf ("DBAT2U = 0x%08X\n", mfspr (DBAT2U));
-       printf ("DBAT3L = 0x%08X\n", mfspr (DBAT3L));
-       printf ("DBAT3U = 0x%08X\n", mfspr (DBAT3U));
-#endif /* INCLUDE_MPC107_REPORT */
-#endif /* CONFIG_MOUSSE */
        return (0);
 }