* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
# endif
#endif
-#if defined(CONFIG_FADS) || defined(CONFIG_ADS)
- /* Enable RS232 */
-#if defined(CONFIG_8xx_CONS_SMC1)
- *((uint *) BCSR1) &= ~BCSR1_RS232EN_1;
-#else
- *((uint *) BCSR1) &= ~BCSR1_RS232EN_2;
-#endif
-#endif /* CONFIG_FADS */
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
- /* Enable Monitor Port Transceiver */
- *((uchar *) BCSR0) |= BCSR0_ENMONXCVR ;
-#endif /* CONFIG_RPXLITE */
-
/* Set the physical address of the host memory buffers in
* the buffer descriptors.
*/
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- /* allocate
- * size of struct serialbuffer with bd rx/tx, buffer rx/tx and rx index
- */
- dpaddr = dpram_alloc_align((sizeof(serialbuffer_t)), 8);
-#else
- dpaddr = CPM_SERIAL_BASE ;
-#endif
+ dpaddr = CPM_SERIAL_BASE;
rtx = (serialbuffer_t *)&cp->cp_dpmem[dpaddr];
/* Allocate space for two buffer descriptors in the DP ram.
up->smc_tstate = 0;
#endif
-#if defined(CONFIG_MBX)
- board_serial_init();
-#endif /* CONFIG_MBX */
-
/* Set UART mode, 8 bit, no parity, one stop.
* Enable receive and transmit.
*/
volatile cpm8xx_t *cpmp = &(im->im_cpm);
volatile serialbuffer_t *rtx;
-#ifdef CONFIG_MODEM_SUPPORT
- if (gd->be_quiet)
- return;
-#endif
-
if (c == '\n')
smc_putc ('\r');
struct serial_device serial_smc_device =
{
- "serial_smc",
- "SMC",
- smc_init,
- NULL,
- smc_setbrg,
- smc_getc,
- smc_tstc,
- smc_putc,
- smc_puts,
+ .name = "serial_smc",
+ .start = smc_init,
+ .stop = NULL,
+ .setbrg = smc_setbrg,
+ .getc = smc_getc,
+ .tstc = smc_tstc,
+ .putc = smc_putc,
+ .puts = smc_puts,
};
#endif /* CONFIG_8xx_CONS_SMC1 || CONFIG_8xx_CONS_SMC2 */
sp = (scc_t *) &(cp->cp_scc[SCC_INDEX]);
up = (scc_uart_t *) &cp->cp_dparam[PROFF_SCC];
-#if defined(CONFIG_LWMON) && defined(CONFIG_8xx_CONS_SCC2)
- { /* Disable Ethernet, enable Serial */
- uchar c;
-
- c = pic_read (0x61);
- c &= ~0x40; /* enable COM3 */
- c |= 0x80; /* disable Ethernet */
- pic_write (0x61, c);
-
- /* enable RTS2 */
- cp->cp_pbpar |= 0x2000;
- cp->cp_pbdat |= 0x2000;
- cp->cp_pbdir |= 0x2000;
- }
-#endif /* CONFIG_LWMON */
-
/* Disable transmitter/receiver. */
sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
cp->cp_pbdir &= ~0x06;
cp->cp_pbodr &= ~0x06;
-#elif (SCC_INDEX < 2) || !defined(CONFIG_IP860)
+#elif (SCC_INDEX < 2)
/*
* Standard configuration for SCC's is on Part A
*/
ip->iop_papar |= ((3 << (2 * SCC_INDEX)));
ip->iop_padir &= ~((3 << (2 * SCC_INDEX)));
ip->iop_paodr &= ~((3 << (2 * SCC_INDEX)));
-#else
- /*
- * The IP860 has SCC3 and SCC4 on Port D
- */
- ip->iop_pdpar |= ((3 << (2 * SCC_INDEX)));
#endif
/* Allocate space for two buffer descriptors in the DP ram. */
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ;
-#else
- dpaddr = CPM_SERIAL2_BASE ;
-#endif
+ dpaddr = dpram_alloc_align(sizeof(cbd_t)*2 + 2, 8);
/* Enable SDMA. */
im->im_siu_conf.sc_sdcr = 0x0001;
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile cpm8xx_t *cpmp = &(im->im_cpm);
-#ifdef CONFIG_MODEM_SUPPORT
- if (gd->be_quiet)
- return;
-#endif
-
if (c == '\n')
scc_putc ('\r');
struct serial_device serial_scc_device =
{
- "serial_scc",
- "SCC",
- scc_init,
- NULL,
- scc_setbrg,
- scc_getc,
- scc_tstc,
- scc_putc,
- scc_puts,
+ .name = "serial_scc",
+ .start = scc_init,
+ .stop = NULL,
+ .setbrg = scc_setbrg,
+ .getc = scc_getc,
+ .tstc = scc_tstc,
+ .putc = scc_putc,
+ .puts = scc_puts,
};
#endif /* CONFIG_8xx_CONS_SCCx */
#endif
}
-#ifdef CONFIG_MODEM_SUPPORT
-void disable_putc(void)
-{
- gd->be_quiet = 1;
-}
-
-void enable_putc(void)
+void mpc8xx_serial_initialize(void)
{
- gd->be_quiet = 0;
-}
+#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2)
+ serial_register(&serial_smc_device);
#endif
+#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \
+ defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
+ serial_register(&serial_scc_device);
+#endif
+}
#if defined(CONFIG_CMD_KGDB)
{
int i = -1;
- if (strcmp(default_serial_console()->ctlr, "SMC") == 0)
+ if (strcmp(default_serial_console()->name, "serial_smc") == 0)
{
#if defined(CONFIG_8xx_CONS_SMC1)
i = 1;
i = 2;
#endif
}
- else if (strcmp(default_serial_console()->ctlr, "SMC") == 0)
+ else if (strcmp(default_serial_console()->name, "serial_scc") == 0)
{
#if defined(CONFIG_8xx_CONS_SCC1)
i = 1;
if (i >= 0)
{
- serial_printf("[on %s%d] ", default_serial_console()->ctlr, i);
+ serial_printf("[on %s%d] ", default_serial_console()->name, i);
}
}
projects / people / ms / u-boot.git / blobdiff