/dts-v1/;
+#include <asm/arch-baytrail/fsp/fsp_configs.h>
#include <dt-bindings/gpio/x86-gpio.h>
#include <dt-bindings/interrupt-router/intel-irq.h>
/include/ "serial.dtsi"
/include/ "rtc.dtsi"
/include/ "tsc_timer.dtsi"
+/include/ "coreboot_fb.dtsi"
/ {
model = "Intel Minnowboard Max";
pch_pinctrl {
compatible = "intel,x86-pinctrl";
- io-base = <0x4c>;
+ reg = <0 0>;
/* GPIO E0 */
soc_gpio_s5_0@0 {
gpio-offset = <0x80 0>;
- pad-offset = <0x1d0>;
mode-gpio;
output-value = <0>;
direction = <PIN_OUTPUT>;
/* GPIO E1 */
soc_gpio_s5_1@0 {
gpio-offset = <0x80 1>;
- pad-offset = <0x210>;
mode-gpio;
output-value = <0>;
direction = <PIN_OUTPUT>;
/* GPIO E2 */
soc_gpio_s5_2@0 {
gpio-offset = <0x80 2>;
- pad-offset = <0x1e0>;
mode-gpio;
output-value = <0>;
direction = <PIN_OUTPUT>;
pin_usb_host_en0@0 {
gpio-offset = <0x80 8>;
- pad-offset = <0x260>;
mode-gpio;
output-value = <1>;
direction = <PIN_OUTPUT>;
pin_usb_host_en1@0 {
gpio-offset = <0x80 9>;
- pad-offset = <0x250>;
mode-gpio;
output-value = <1>;
direction = <PIN_OUTPUT>;
};
- };
-
- gpioa {
- compatible = "intel,ich6-gpio";
- u-boot,dm-pre-reloc;
- reg = <0 0x20>;
- bank-name = "A";
- };
-
- gpiob {
- compatible = "intel,ich6-gpio";
- u-boot,dm-pre-reloc;
- reg = <0x20 0x20>;
- bank-name = "B";
- };
-
- gpioc {
- compatible = "intel,ich6-gpio";
- u-boot,dm-pre-reloc;
- reg = <0x40 0x20>;
- bank-name = "C";
- };
-
- gpiod {
- compatible = "intel,ich6-gpio";
- u-boot,dm-pre-reloc;
- reg = <0x60 0x20>;
- bank-name = "D";
- };
-
- gpioe {
- compatible = "intel,ich6-gpio";
- u-boot,dm-pre-reloc;
- reg = <0x80 0x20>;
- bank-name = "E";
- };
- gpiof {
- compatible = "intel,ich6-gpio";
- u-boot,dm-pre-reloc;
- reg = <0xA0 0x20>;
- bank-name = "F";
+ /*
+ * As of today, the latest version FSP (gold4) for BayTrail
+ * misses the PAD configuration of the SD controller's Card
+ * Detect signal. The default PAD value for the CD pin sets
+ * the pin to work in GPIO mode, which causes card detect
+ * status cannot be reflected by the Present State register
+ * in the SD controller (bit 16 & bit 18 are always zero).
+ *
+ * Configure this pin to function 1 (SD controller).
+ */
+ sdmmc3_cd@0 {
+ pad-offset = <0x3a0>;
+ mode-func = <1>;
+ };
};
chosen {
pch@1f,0 {
reg = <0x0000f800 0 0 0 0>;
compatible = "pci8086,0f1c", "intel,pch9";
+ #address-cells = <1>;
+ #size-cells = <1>;
irq-router {
compatible = "intel,irq-router";
intel,pirq-config = "ibase";
intel,ibase-offset = <0x50>;
+ intel,actl-addr = <0>;
intel,pirq-link = <8 8>;
intel,pirq-mask = <0xdee0>;
intel,pirq-routing = <
spi: spi {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "intel,ich-spi";
+ compatible = "intel,ich9-spi";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
};
};
};
+
+ gpioa {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0 0x20>;
+ bank-name = "A";
+ use-lvl-write-cache;
+ };
+
+ gpiob {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0x20 0x20>;
+ bank-name = "B";
+ use-lvl-write-cache;
+ };
+
+ gpioc {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0x40 0x20>;
+ bank-name = "C";
+ use-lvl-write-cache;
+ };
+
+ gpiod {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0x60 0x20>;
+ bank-name = "D";
+ use-lvl-write-cache;
+ };
+
+ gpioe {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0x80 0x20>;
+ bank-name = "E";
+ use-lvl-write-cache;
+ };
+
+ gpiof {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0xA0 0x20>;
+ bank-name = "F";
+ use-lvl-write-cache;
+ };
};
};
fsp {
compatible = "intel,baytrail-fsp";
- fsp,mrc-init-tseg-size = <0>;
- fsp,mrc-init-mmio-size = <0x800>;
+ fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
+ fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
fsp,mrc-init-spd-addr1 = <0xa0>;
fsp,mrc-init-spd-addr2 = <0xa2>;
- fsp,emmc-boot-mode = <2>;
+ fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
fsp,enable-sdio;
fsp,enable-sdcard;
fsp,enable-hsuart1;
fsp,enable-spi;
fsp,enable-sata;
- fsp,sata-mode = <1>;
- fsp,enable-lpe;
- fsp,lpss-sio-enable-pci-mode;
+ fsp,sata-mode = <SATA_MODE_AHCI>;
+ fsp,lpe-mode = <LPE_MODE_PCI>;
+ fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
fsp,enable-dma0;
fsp,enable-dma1;
fsp,enable-i2c0;
fsp,enable-i2c6;
fsp,enable-pwm0;
fsp,enable-pwm1;
- fsp,igd-dvmt50-pre-alloc = <2>;
- fsp,aperture-size = <2>;
- fsp,gtt-size = <2>;
- fsp,serial-debug-port-address = <0x3f8>;
- fsp,serial-debug-port-type = <1>;
- fsp,scc-enable-pci-mode;
- fsp,os-selection = <4>;
+ fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
+ fsp,aperture-size = <APERTURE_SIZE_256MB>;
+ fsp,gtt-size = <GTT_SIZE_2MB>;
+ fsp,scc-mode = <SCC_MODE_PCI>;
+ fsp,os-selection = <OS_SELECTION_LINUX>;
fsp,emmc45-ddr50-enabled;
fsp,emmc45-retune-timer-value = <8>;
fsp,enable-igd;
fsp,enable-memory-down;
fsp,memory-down-params {
compatible = "intel,baytrail-fsp-mdp";
- fsp,dram-speed = <1>;
- fsp,dram-type = <1>;
+ fsp,dram-speed = <DRAM_SPEED_1066MTS>;
+ fsp,dram-type = <DRAM_TYPE_DDR3L>;
fsp,dimm-0-enable;
- fsp,dimm-width = <1>;
- fsp,dimm-density = <2>;
- fsp,dimm-bus-width = <3>;
- fsp,dimm-sides = <0>;
+ fsp,dimm-width = <DIMM_WIDTH_X16>;
+ fsp,dimm-density = <DIMM_DENSITY_4GBIT>;
+ fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
+ fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
fsp,dimm-tcl = <0xb>;
fsp,dimm-trpt-rcd = <0xb>;
fsp,dimm-twr = <0xc>;
microcode {
update@0 {
-#include "microcode/m0130673322.dtsi"
+#include "microcode/m0130673325.dtsi"
};
update@1 {
-#include "microcode/m0130679901.dtsi"
+#include "microcode/m0130679907.dtsi"
};
};
projects / people / ms / u-boot.git / blobdiff