Drop references to MAKEALL in the documentation

[people/ms/u-boot.git] / board / Barix / ipam390 / README.ipam390

diff --git a/board/Barix/ipam390/README.ipam390 b/board/Barix/ipam390/README.ipam390
index 2d155a33fe5e9b27fc0bf46c9ed9e634e002e53c..be09280dd81cb7859301deaf3d8135ef00fe7789 100644 (file)
--- a/board/Barix/ipam390/README.ipam390
+++ b/board/Barix/ipam390/README.ipam390
@@ -31,9 +31,9 @@ loading the next image from a different media, etc).
 
 Compilation
 ===========
-run "./MAKEALL ipam390" in the u-boot source tree.
-Once this build completes you will have a u-boot.ais file that needs to
-be written to the nand flash.
+run "tools/buildman/buildman -k ipam390" in the u-boot source tree.
+Once this build completes you will have a ../current/ipam390/u-boot.ais file
+that needs to be written to the nand flash.
 
 Flashing the images to NAND
 ==========================
@@ -50,7 +50,7 @@ TFTP from server 192.168.1.1; our IP address is 192.168.20.71
 Filename '/tftpboot/ipam390/u-boot.ais'.
 Load address: 0xc0000000
 Loading: ##################################
-         1.5 MiB/s
+        1.5 MiB/s
 done
 Bytes transferred = 493716 (78894 hex)
 
@@ -71,13 +71,13 @@ here[1] to create an uboot-uart-ais.bin file
 - cd to the u-boot source tree
 
 - compile the u-boot for the ipam390 board:
-$ ./MAKEALL ipam390
+$ tools/buildman/buildman -k ipam390
 
   -> Now we shall have u-boot.bin
 
 - Create u-boot-uart-ais.bin
-$ mono HexAIS_OMAP-L138.exe -entrypoint 0xC1080000 -ini
-ipam390-ais-uart.cfg -o ./uboot-uart-ais.bin ./u-boot.bin@0xC1080000;
+$ mono HexAIS_OMAP-L138.exe -entrypoint 0xC1080000 -ini ipam390-ais-uart.cfg \
+       -o ../current/ipam390/uboot-uart-ais.bin ./u-boot.bin@0xC1080000;
 
 Note: The ipam390-ais-uart.cfg is found in the board directory
 for the ipam390 board, u-boot:/board/Barix/ipam390/ipam390-ais-uart.cfg