*
* Copyright (C) 2011, Stefano Babic <sbabic@denx.de>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
-#include <asm/arch/mx35_pins.h>
-#include <asm/arch/iomux.h>
+#include <asm/arch/iomux-mx35.h>
#include <i2c.h>
#include <linux/types.h>
#include <asm/gpio.h>
#include <asm/arch/sys_proto.h>
#include <netdev.h>
+#include <fdt_support.h>
+#include <mtd_node.h>
+#include <jffs2/load_kernel.h>
#ifndef CONFIG_BOARD_EARLY_INIT_F
#error "CONFIG_BOARD_EARLY_INIT_F must be set for this board"
static void setup_iomux_uart3(void)
{
- mxc_request_iomux(MX35_PIN_RTS2, MUX_CONFIG_ALT7);
- mxc_request_iomux(MX35_PIN_CTS2, MUX_CONFIG_ALT7);
+ static const iomux_v3_cfg_t uart3_pads[] = {
+ MX35_PAD_RTS2__UART3_RXD_MUX,
+ MX35_PAD_CTS2__UART3_TXD_MUX,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
}
+#define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE)
+
static void setup_iomux_i2c(void)
{
- int pad;
+ static const iomux_v3_cfg_t i2c_pads[] = {
+ NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL),
+ NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL),
- mxc_request_iomux(MX35_PIN_I2C1_CLK, MUX_CONFIG_SION);
- mxc_request_iomux(MX35_PIN_I2C1_DAT, MUX_CONFIG_SION);
+ NEW_PAD_CTRL(MX35_PAD_TX3_RX2__I2C3_SCL, I2C_PAD_CTRL),
+ NEW_PAD_CTRL(MX35_PAD_TX2_RX3__I2C3_SDA, I2C_PAD_CTRL),
+ };
- pad = (PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE \
- | PAD_CTL_PUE_PUD | PAD_CTL_ODE_OpenDrain);
-
- mxc_iomux_set_pad(MX35_PIN_I2C1_CLK, pad);
- mxc_iomux_set_pad(MX35_PIN_I2C1_DAT, pad);
-
- mxc_request_iomux(MX35_PIN_TX3_RX2, MUX_CONFIG_ALT1);
- mxc_request_iomux(MX35_PIN_TX2_RX3, MUX_CONFIG_ALT1);
-
- mxc_iomux_set_pad(MX35_PIN_TX3_RX2, pad);
- mxc_iomux_set_pad(MX35_PIN_TX2_RX3, pad);
+ imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
}
static void setup_iomux_spi(void)
{
- mxc_request_iomux(MX35_PIN_CSPI1_MOSI, MUX_CONFIG_SION);
- mxc_request_iomux(MX35_PIN_CSPI1_MISO, MUX_CONFIG_SION);
- mxc_request_iomux(MX35_PIN_CSPI1_SS0, MUX_CONFIG_SION);
- mxc_request_iomux(MX35_PIN_CSPI1_SS1, MUX_CONFIG_SION);
- mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION);
+ static const iomux_v3_cfg_t spi_pads[] = {
+ MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
+ MX35_PAD_CSPI1_MISO__CSPI1_MISO,
+ MX35_PAD_CSPI1_SS0__CSPI1_SS0,
+ MX35_PAD_CSPI1_SS1__CSPI1_SS1,
+ MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads));
}
static void setup_iomux_fec(void)
{
- /* setup pins for FEC */
- mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC);
- mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC);
+ static const iomux_v3_cfg_t fec_pads[] = {
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX35_PAD_FEC_COL__FEC_COL,
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX35_PAD_FEC_MDC__FEC_MDC,
+ MX35_PAD_FEC_MDIO__FEC_MDIO,
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+ MX35_PAD_FEC_CRS__FEC_CRS,
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+ };
+ /* setup pins for FEC */
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
}
int board_early_init_f(void)
(struct ccm_regs *)IMX_CCM_BASE;
/* setup GPIO3_1 to set HighVCore signal */
- mxc_request_iomux(MX35_PIN_ATA_DA1, MUX_CONFIG_ALT5);
+ imx_iomux_v3_setup_pad(MX35_PAD_ATA_DA1__GPIO3_1);
gpio_direction_output(65, 1);
/* initialize PLL and clock configuration */
return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
}
+
+/*
+ * called prior to booting kernel or by 'fdt boardsetup' command
+ *
+ */
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ struct node_info nodes[] = {
+ { "physmap-flash.0", MTD_DEV_TYPE_NOR, }, /* NOR flash */
+ { "mxc_nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
+ };
+
+ if (getenv("fdt_noauto")) {
+ puts(" Skiping ft_board_setup (fdt_noauto defined)\n");
+ return 0;
+ }
+
+ fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+
+ return 0;
+}
projects / people / ms / u-boot.git / blobdiff