Merge git://git.denx.de/u-boot-sh

[people/ms/u-boot.git] / board / altera / arria5-socdk / socfpga.c

diff --git a/board/altera/arria5-socdk/socfpga.c b/board/altera/arria5-socdk/socfpga.c
index 0fbbc3456ca3b03253f4cdea2621d88e836695c8..97fb902f8e6a9ad0f5f43c5b5d77ddbc4d0db389 100644 (file)
--- a/board/altera/arria5-socdk/socfpga.c
+++ b/board/altera/arria5-socdk/socfpga.c
@@ -3,83 +3,4 @@
  *
  * SPDX-License-Identifier:    GPL-2.0+
  */
-
 #include <common.h>
-#include <asm/arch/reset_manager.h>
-#include <asm/io.h>
-
-#include <usb.h>
-#include <usb/dwc2_udc.h>
-#include <usb_mass_storage.h>
-
-#include <micrel.h>
-#include <netdev.h>
-#include <phy.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void s_init(void) {}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-int board_init(void)
-{
-       /* Address of boot parameters for ATAG (if ATAG is used) */
-       gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-       return 0;
-}
-
-/*
- * PHY configuration
- */
-#ifdef CONFIG_PHY_MICREL_KSZ9021
-int board_phy_config(struct phy_device *phydev)
-{
-       int ret;
-       /*
-        * These skew settings for the KSZ9021 ethernet phy is required for ethernet
-        * to work reliably on most flavors of cyclone5 boards.
-        */
-       ret = ksz9021_phy_extended_write(phydev,
-                                        MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
-                                        0x0);
-       if (ret)
-               return ret;
-
-       ret = ksz9021_phy_extended_write(phydev,
-                                        MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW,
-                                        0x0);
-       if (ret)
-               return ret;
-
-       ret = ksz9021_phy_extended_write(phydev,
-                                        MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
-                                        0xf0f0);
-       if (ret)
-               return ret;
-
-       if (phydev->drv->config)
-               return phydev->drv->config(phydev);
-
-       return 0;
-}
-#endif
-
-#ifdef CONFIG_USB_GADGET
-struct dwc2_plat_otg_data socfpga_otg_data = {
-       .regs_otg       = CONFIG_USB_DWC2_REG_ADDR,
-       .usb_gusbcfg    = 0x1417,
-};
-
-int board_usb_init(int index, enum usb_init_type init)
-{
-       return dwc2_udc_probe(&socfpga_otg_data);
-}
-
-int g_dnl_board_usb_cable_connected(void)
-{
-       return 1;
-}
-#endif