ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board

[people/ms/u-boot.git] / board / amcc / sequoia / sequoia.c

diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index 37b4f31b908f5d7674ecd1ebf287a93f6b94ed51..2268bc06b1970442b290c58e1b4d7ac8cf08a1a6 100644 (file)
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -26,6 +26,7 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 #include <ppc440.h>
+#include <asm/gpio.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 
@@ -44,36 +45,6 @@ int board_early_init_f(void)
        mtdcr(ebccfga, xbcfg);
        mtdcr(ebccfgd, 0xb8400000);
 
-       /*--------------------------------------------------------------------
-        * Setup the GPIO pins
-        *-------------------------------------------------------------------*/
-       /* test-only: take GPIO init from pcs440ep ???? in config file */
-       out_be32((u32 *) GPIO0_OR, 0x00000000);
-       out_be32((u32 *) GPIO0_TCR, 0x0000000f);
-       out_be32((u32 *) GPIO0_OSRL, 0x50015400);
-       out_be32((u32 *) GPIO0_OSRH, 0x550050aa);
-       out_be32((u32 *) GPIO0_TSRL, 0x50015400);
-       out_be32((u32 *) GPIO0_TSRH, 0x55005000);
-       out_be32((u32 *) GPIO0_ISR1L, 0x50000000);
-       out_be32((u32 *) GPIO0_ISR1H, 0x00000000);
-       out_be32((u32 *) GPIO0_ISR2L, 0x00000000);
-       out_be32((u32 *) GPIO0_ISR2H, 0x00000100);
-       out_be32((u32 *) GPIO0_ISR3L, 0x00000000);
-       out_be32((u32 *) GPIO0_ISR3H, 0x00000000);
-
-       out_be32((u32 *) GPIO1_OR, 0x00000000);
-       out_be32((u32 *) GPIO1_TCR, 0xc2000000);
-       out_be32((u32 *) GPIO1_OSRL, 0x5c280000);
-       out_be32((u32 *) GPIO1_OSRH, 0x00000000);
-       out_be32((u32 *) GPIO1_TSRL, 0x0c000000);
-       out_be32((u32 *) GPIO1_TSRH, 0x00000000);
-       out_be32((u32 *) GPIO1_ISR1L, 0x00005550);
-       out_be32((u32 *) GPIO1_ISR1H, 0x00000000);
-       out_be32((u32 *) GPIO1_ISR2L, 0x00050000);
-       out_be32((u32 *) GPIO1_ISR2H, 0x00000000);
-       out_be32((u32 *) GPIO1_ISR3L, 0x01400000);
-       out_be32((u32 *) GPIO1_ISR3H, 0x00000000);
-
        /*--------------------------------------------------------------------
         * Setup the interrupt controller polarities, triggers, etc.
         *-------------------------------------------------------------------*/