Merge git://git.denx.de/u-boot-sunxi

[people/ms/u-boot.git] / board / amlogic / odroid-c2 / odroid-c2.c

diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c
index bd72100e09bcac206c54b1ff54ecb96ad8f313bd..0cb571432f0bc46157cc136fc2f7231df369f310 100644 (file)
--- a/board/amlogic/odroid-c2/odroid-c2.c
+++ b/board/amlogic/odroid-c2/odroid-c2.c
@@ -5,11 +5,12 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <asm/io.h>
 #include <asm/arch/gxbb.h>
 #include <asm/arch/sm.h>
-#include <dm/platdata.h>
-#include <phy.h>
+#include <asm/arch/eth.h>
+#include <asm/arch/mem.h>
 
 #define EFUSE_SN_OFFSET                20
 #define EFUSE_SN_SIZE          16
@@ -21,34 +22,16 @@ int board_init(void)
        return 0;
 }
 
-static const struct eth_pdata gxbb_eth_pdata = {
-       .iobase = GXBB_ETH_BASE,
-       .phy_interface = PHY_INTERFACE_MODE_RGMII,
-};
-
-U_BOOT_DEVICE(meson_eth) = {
-       .name = "eth_designware",
-       .platdata = &gxbb_eth_pdata,
-};
-
 int misc_init_r(void)
 {
        u8 mac_addr[EFUSE_MAC_SIZE];
+       char serial[EFUSE_SN_SIZE];
        ssize_t len;
 
-       /* Select Ethernet function */
-       setbits_le32(GXBB_PINMUX(6), 0x3fff);
-
-       /* Set RGMII mode */
-       setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF |
-                                    GXBB_ETH_REG_0_TX_PHASE(1) |
-                                    GXBB_ETH_REG_0_TX_RATIO(4) |
-                                    GXBB_ETH_REG_0_PHY_CLK_EN |
-                                    GXBB_ETH_REG_0_CLK_EN);
+       meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
 
        /* Enable power and clock gate */
-       setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
-       clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
+       setbits_le32(GXBB_GCLK_MPEG_0, GXBB_GCLK_MPEG_0_I2C);
 
        /* Reset PHY on GPIOZ_14 */
        clrbits_le32(GXBB_GPIO_EN(3), BIT(14));
@@ -56,12 +39,26 @@ int misc_init_r(void)
        mdelay(10);
        setbits_le32(GXBB_GPIO_OUT(3), BIT(14));
 
-       if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+       if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
                len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
                                          mac_addr, EFUSE_MAC_SIZE);
                if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr))
-                       eth_setenv_enetaddr("ethaddr", mac_addr);
+                       eth_env_set_enetaddr("ethaddr", mac_addr);
+       }
+
+       if (!env_get("serial#")) {
+               len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial,
+                       EFUSE_SN_SIZE);
+               if (len == EFUSE_SN_SIZE) 
+                       env_set("serial#", serial);
        }
 
        return 0;
 }
+
+int ft_board_setup(void *blob, bd_t *bd)
+{
+       meson_gx_init_reserved_memory(blob);
+
+       return 0;
+}