rename CFG_ macros to CONFIG_SYS

[people/ms/u-boot.git] / board / atmel / at91sam9263ek / at91sam9263ek.c

diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index ba7fc71d75e70ad715ad3f358695a36fa90fa937..dd513b9e12f3c2271668ef88ddf939cea3c50c5a 100644 (file)
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -31,11 +31,13 @@
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
 #include <lcd.h>
 #include <atmel_lcdc.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
 #include <net.h>
 #endif
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -83,8 +85,8 @@ static void at91sam9263ek_nand_hw_init(void)
 
        /* Configure SMC CS3 for NAND/SmartMedia */
        at91_sys_write(AT91_SMC_SETUP(3),
-                      AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
-                      AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+                      AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+                      AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
        at91_sys_write(AT91_SMC_PULSE(3),
                       AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
                       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
@@ -93,9 +95,9 @@ static void at91sam9263ek_nand_hw_init(void)
        at91_sys_write(AT91_SMC_MODE(3),
                       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
                       AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
                       AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
                       AT91_SMC_DBW_8 |
 #endif
                       AT91_SMC_TDF_(2));
@@ -147,7 +149,7 @@ static void at91sam9263ek_macb_hw_init(void)
 
        /* Need to reset PHY -> 500ms reset */
        at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
-                                    AT91_RSTC_ERSTL | (0x0D << 8) |
+                                    (AT91_RSTC_ERSTL & (0x0D << 8)) |
                                     AT91_RSTC_URSTEN);
 
        at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
@@ -155,6 +157,11 @@ static void at91sam9263ek_macb_hw_init(void)
        /* Wait for end hardware reset */
        while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
 
+       /* Restore NRST value */
+       at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+                                    (AT91_RSTC_ERSTL & (0x0 << 8)) |
+                                    AT91_RSTC_URSTEN);
+
        /* Re-enable pull-up */
        writel(pin_to_mask(AT91_PIN_PC25),
               pin_to_controller(AT91_PIN_PC0) + PIO_PUER);
@@ -303,3 +310,12 @@ void reset_phy(void)
 #endif
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+       int rc = 0;
+#ifdef CONFIG_MACB
+       rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00);
+#endif
+       return rc;
+}