drivers, block: remove sil680 driver

[people/ms/u-boot.git] / board / esd / common / fpga.c

diff --git a/board/esd/common/fpga.c b/board/esd/common/fpga.c
index 5232dddc9e88028d8c3215969990a284ebcb442d..5c70b474d94b85f4b5846857a1d6b662b27d461a 100644 (file)
--- a/board/esd/common/fpga.c
+++ b/board/esd/common/fpga.c
@@ -3,27 +3,12 @@
  * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <command.h>
 
 /* ------------------------------------------------------------------------- */
@@ -55,7 +40,7 @@
 #define ERROR_FPGA_PRG_DONE      -3    /* Timeout after programming     */
 
 #ifndef SET_FPGA
-# define SET_FPGA(data)         out32(GPIO0_OR, data)
+# define SET_FPGA(data)         out_be32((void *)GPIO0_OR, data)
 #endif
 
 #ifdef FPGA_PROG_ACTIVE_HIGH
@@ -85,10 +70,10 @@
        SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH);}      /* set data to 1  */
 
 #ifndef FPGA_DONE_STATE
-# define FPGA_DONE_STATE (in32(GPIO0_IR) & FPGA_DONE)
+# define FPGA_DONE_STATE (in_be32((void *)GPIO0_IR) & FPGA_DONE)
 #endif
 #ifndef FPGA_INIT_STATE
-# define FPGA_INIT_STATE (in32(GPIO0_IR) & FPGA_INIT)
+# define FPGA_INIT_STATE (in_be32((void *)GPIO0_IR) & FPGA_INIT)
 #endif
 
 
@@ -139,8 +124,11 @@ static int fpga_boot (const unsigned char *fpgadata, int size)
         * Setup port pins for fpga programming
         */
 #ifndef CONFIG_M5249
-       out32 (GPIO0_ODR, 0x00000000);  /* no open drain pins */
-       out32 (GPIO0_TCR, in32 (GPIO0_TCR) | FPGA_PRG | FPGA_CLK | FPGA_DATA);  /* setup for output */
+       out_be32 ((void *)GPIO0_ODR, 0x00000000); /* no open drain pins */
+       /* setup for output */
+       out_be32 ((void *)GPIO0_TCR,
+                 in_be32 ((void *)GPIO0_TCR) |
+                 FPGA_PRG | FPGA_CLK | FPGA_DATA);
 #endif
        SET_FPGA (FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH);      /* set pins to high */