sdsdp[2]=0x40082350;
sdsdp[3]=0x0d050000;
} else if (!strcmp(argv[1], "667")) {
- /* PLB=133MHz, PLB/PCI=4 */
+ /* PLB=133MHz, PLB/PCI=3 */
printf("Bootstrapping for 667MHz\n");
sdsdp[0]=0x8778a256;
- sdsdp[1]=0x0947a030;
- sdsdp[2]=0x40082350;
- sdsdp[3]=0x0d050000;
- } else if (!strcmp(argv[1], "test")) {
- /*
- * TODO: this will replace the 667 MHz config above.
- * But it needs some more testing on a real 667 MHz CPU.
- */
- printf("Bootstrapping for test"
- " (667MHz PLB=133PLB PLB/PCI=3)\n");
- sdsdp[0]=0x8778a256;
sdsdp[1]=0x095fa030;
sdsdp[2]=0x40082350;
sdsdp[3]=0x0d050000;
}
printf("Writing boot EEPROM ...\n");
- if (bootstrap_eeprom_write(CFG_I2C_BOOT_EEPROM_ADDR,
+ if (bootstrap_eeprom_write(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
0, (uchar*)sdsdp, count) != 0)
printf("bootstrap_eeprom_write failed\n");
else
printf("PARAM: @%08x\n", param);
memset((void*)param, 0, (pram << 10));
- env_base = memsize - 4096 - ((CFG_ENV_SIZE + 4096) & ~(4096-1));
- memcpy((void*)env_base, env_ptr, CFG_ENV_SIZE);
+ env_base = memsize - 4096 - ((CONFIG_ENV_SIZE + 4096) & ~(4096-1));
+ memcpy((void*)env_base, env_ptr, CONFIG_ENV_SIZE);
lptr = (ulong*)memsize;
- *(--lptr) = CFG_ENV_SIZE;
+ *(--lptr) = CONFIG_ENV_SIZE;
*(--lptr) = memsize - env_base;
*(--lptr) = crc32(0, (void*)(memsize - 0x08), 0x08);
*(--lptr) = 0;
"<pciaddr> (pciaddr will be aligned to 256MB)\n"
);
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int query = argc == 1;
if (query) {
/* Query write access state. */
- state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, -1);
+ state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1);
if (state < 0) {
puts("Query of write access state failed.\n");
} else {
printf("Write access for device 0x%0x is %sabled.\n",
- CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+ CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
state = 0;
}
} else {
if ('0' == argv[1][0]) {
/* Disable write access. */
- state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 0);
+ state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 0);
} else {
/* Enable write access. */
- state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 1);
+ state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 1);
}
if (state < 0) {
puts("Setup of write access state failed.\n");
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"eepwren - Enable / disable / query EEPROM write access\n",
NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
#endif /* CONFIG_CMD_BSP */