/*
* Copyright 2010-2011 Freescale Semiconductor, Inc.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <netdev.h>
#include <pci.h>
#include <asm/fsl_serdes.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
#include <asm/fsl_pci.h>
-
-#ifndef CONFIG_SDCARD
#include <hwconfig.h>
-#endif
+#include <i2c.h>
DECLARE_GLOBAL_DATA_PTR;
#define MUX_CPLD_TDM 0x01
#define MUX_CPLD_SPICS0_FLASH 0x00
#define MUX_CPLD_SPICS0_SLIC 0x02
+#define PMUXCR1_IFC_MASK 0x00ffff00
+#define PMUXCR1_SDHC_MASK 0x00fff000
+#define PMUXCR1_SDHC_ENABLE 0x00555000
+
+enum {
+ MUX_TYPE_IFC,
+ MUX_TYPE_SDHC,
+ MUX_TYPE_SPIFLASH,
+ MUX_TYPE_TDM,
+ MUX_TYPE_CAN,
+ MUX_TYPE_CS0_NOR,
+ MUX_TYPE_CS0_NAND,
+};
+
+enum {
+ I2C_READ_BANK,
+ I2C_READ_PCB_VER,
+};
+
+static uint sd_ifc_mux;
-#ifndef CONFIG_SDCARD
struct cpld_data {
u8 cpld_ver; /* cpld revision */
+#if defined(CONFIG_TARGET_P1010RDB_PA)
u8 pcba_ver; /* pcb revision number */
u8 twindie_ddr3;
u8 res1[6];
u8 por1; /* POR Options */
u8 por2; /* POR Options */
u8 por3; /* POR Options */
-};
-
-void cpld_show(void)
-{
- struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-
- printf("CPLD: V%x.%x PCBA: V%x.0\n",
- in_8(&cpld_data->cpld_ver) & 0xF0,
- in_8(&cpld_data->cpld_ver) & 0x0F,
- in_8(&cpld_data->pcba_ver) & 0x0F);
-
-#ifdef CONFIG_DEBUG
- printf("twindie_ddr =%x\n",
- in_8(&cpld_data->twindie_ddr3));
- printf("bank_sel =%x\n",
- in_8(&cpld_data->bank_sel));
- printf("usb2_sel =%x\n",
- in_8(&cpld_data->usb2_sel));
- printf("porsw_sel =%x\n",
- in_8(&cpld_data->porsw_sel));
- printf("tdm_can_sel =%x\n",
- in_8(&cpld_data->tdm_can_sel));
- printf("tdm_can_sel =%x\n",
- in_8(&cpld_data->tdm_can_sel));
- printf("spi_cs0_sel =%x\n",
- in_8(&cpld_data->spi_cs0_sel));
- printf("bcsr0 =%x\n",
- in_8(&cpld_data->bcsr0));
- printf("bcsr1 =%x\n",
- in_8(&cpld_data->bcsr1));
- printf("bcsr2 =%x\n",
- in_8(&cpld_data->bcsr2));
- printf("bcsr3 =%x\n",
- in_8(&cpld_data->bcsr3));
-#endif
-}
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
+ u8 rom_loc;
#endif
+};
int board_early_init_f(void)
{
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
-#ifndef CONFIG_SDCARD
- struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR;
-
+ struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
/* Clock configuration to access CPLD using IFC(GPCM) */
- setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
-#endif
+ setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
/*
* Reset PCIe slots via GPIO4
*/
int board_early_init_r(void)
{
-#ifndef CONFIG_SDCARD
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
- const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+ int flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash region to caching-inhibited
flush_dcache();
invalidate_icache();
- /* invalidate existing TLB entry for flash */
- disable_tlb(flash_esel);
+ if (flash_esel == -1) {
+ /* very unlikely unless something is messed up */
+ puts("Error: Could not find TLB for FLASH BASE\n");
+ flash_esel = 2; /* give our best effort to continue */
+ } else {
+ /* invalidate existing TLB entry for flash */
+ disable_tlb(flash_esel);
+ }
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel+1, BOOKE_PAGESZ_16M, 1);
-#endif
return 0;
}
}
#endif /* ifdef CONFIG_PCI */
+int config_board_mux(int ctrl_type)
+{
+ ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u8 tmp;
+
+#if defined(CONFIG_TARGET_P1010RDB_PA)
+ struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+
+ switch (ctrl_type) {
+ case MUX_TYPE_IFC:
+ i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+ tmp = 0xf0;
+ i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1);
+ tmp = 0x01;
+ i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1);
+ sd_ifc_mux = MUX_TYPE_IFC;
+ clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
+ break;
+ case MUX_TYPE_SDHC:
+ i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+ tmp = 0xf0;
+ i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1);
+ tmp = 0x05;
+ i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1);
+ sd_ifc_mux = MUX_TYPE_SDHC;
+ clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
+ PMUXCR1_SDHC_ENABLE);
+ break;
+ case MUX_TYPE_SPIFLASH:
+ out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH);
+ break;
+ case MUX_TYPE_TDM:
+ out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM);
+ out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC);
+ break;
+ case MUX_TYPE_CAN:
+ out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART);
+ break;
+ default:
+ break;
+ }
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
+ uint orig_bus = i2c_get_bus_num();
+ i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+
+ switch (ctrl_type) {
+ case MUX_TYPE_IFC:
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x04);
+ i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+ i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x04);
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ sd_ifc_mux = MUX_TYPE_IFC;
+ clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
+ break;
+ case MUX_TYPE_SDHC:
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+ setbits_8(&tmp, 0x04);
+ i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+ i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x04);
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ sd_ifc_mux = MUX_TYPE_SDHC;
+ clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
+ PMUXCR1_SDHC_ENABLE);
+ break;
+ case MUX_TYPE_SPIFLASH:
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x80);
+ i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+ i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x80);
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ break;
+ case MUX_TYPE_TDM:
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+ setbits_8(&tmp, 0x82);
+ i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+ i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x82);
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ break;
+ case MUX_TYPE_CAN:
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x02);
+ i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+ i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x02);
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ break;
+ case MUX_TYPE_CS0_NOR:
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x08);
+ i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+ i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x08);
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ break;
+ case MUX_TYPE_CS0_NAND:
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+ setbits_8(&tmp, 0x08);
+ i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+ i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x08);
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ break;
+ default:
+ break;
+ }
+ i2c_set_bus_num(orig_bus);
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_TARGET_P1010RDB_PB
+int i2c_pca9557_read(int type)
+{
+ u8 val;
+
+ i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &val, 1);
+
+ switch (type) {
+ case I2C_READ_BANK:
+ val = (val & 0x10) >> 4;
+ break;
+ case I2C_READ_PCB_VER:
+ val = ((val & 0x60) >> 5) + 1;
+ break;
+ default:
+ break;
+ }
+
+ return val;
+}
+#endif
+
int checkboard(void)
{
struct cpu_type *cpu;
+ struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+ u8 val;
+
+ cpu = gd->arch.cpu;
+#if defined(CONFIG_TARGET_P1010RDB_PA)
+ printf("Board: %sRDB-PA, ", cpu->name);
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
+ printf("Board: %sRDB-PB, ", cpu->name);
+ i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+ i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_FSL_I2C_SLAVE);
+ val = 0x0; /* no polarity inversion */
+ i2c_write(I2C_PCA9557_ADDR2, 2, 1, &val, 1);
+#endif
- cpu = gd->cpu;
- printf("Board: %sRDB ", cpu->name);
-#ifdef CONFIG_PHYS_64BIT
- puts("(36-bit addrmap)");
+#ifdef CONFIG_SDCARD
+ /* switch to IFC to read info from CPLD */
+ config_board_mux(MUX_TYPE_IFC);
#endif
- puts("\n");
+#if defined(CONFIG_TARGET_P1010RDB_PA)
+ val = (in_8(&cpld_data->pcba_ver) & 0xf);
+ printf("PCB: v%x.0\n", val);
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
+ val = in_8(&cpld_data->cpld_ver);
+ printf("CPLD: v%x.%x, ", val >> 4, val & 0xf);
+ printf("PCB: v%x.0, ", i2c_pca9557_read(I2C_READ_PCB_VER));
+ val = in_8(&cpld_data->rom_loc) & 0xf;
+ puts("Boot from: ");
+ switch (val) {
+ case 0xf:
+ config_board_mux(MUX_TYPE_CS0_NOR);
+ printf("NOR vBank%d\n", i2c_pca9557_read(I2C_READ_BANK));
+ break;
+ case 0xe:
+ puts("SDHC\n");
+ val = 0x60; /* set pca9557 pin input/output */
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &val, 1);
+ break;
+ case 0x5:
+ config_board_mux(MUX_TYPE_IFC);
+ config_board_mux(MUX_TYPE_CS0_NAND);
+ puts("NAND\n");
+ break;
+ case 0x6:
+ config_board_mux(MUX_TYPE_IFC);
+ puts("SPI\n");
+ break;
+ default:
+ puts("unknown\n");
+ break;
+ }
+#endif
return 0;
}
-#ifdef CONFIG_TSEC_ENET
int board_eth_init(bd_t *bis)
{
+#ifdef CONFIG_TSEC_ENET
struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[4];
struct cpu_type *cpu;
int num = 0;
- cpu = gd->cpu;
+ cpu = gd->arch.cpu;
#ifdef CONFIG_TSEC1
SET_STD_TSEC_INFO(tsec_info[num], 1);
#endif
#ifdef CONFIG_TSEC3
/* P1014 and it's derivatives do not support eTSEC3 */
- if (cpu->soc_ver != SVR_P1014 && cpu->soc_ver != SVR_P1014_E) {
+ if (cpu->soc_ver != SVR_P1014) {
SET_STD_TSEC_INFO(tsec_info[num], 3);
num++;
}
fsl_pq_mdio_init(bis, &mdio_info);
tsec_eth_init(bis, tsec_info, num);
+#endif
return pci_eth_init(bis);
}
-#endif
#if defined(CONFIG_OF_BOARD_SETUP)
void fdt_del_flexcan(void *blob)
int nodeoff = 0;
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
- "fsl,flexcan-v1.0")) >= 0) {
+ "fsl,p1010-flexcan")) >= 0) {
fdt_del_node(blob, nodeoff);
}
}
}
}
-void ft_board_setup(void *blob, bd_t *bd)
+void fdt_del_sdhc(void *blob)
+{
+ int nodeoff = 0;
+
+ while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+ "fsl,esdhc")) >= 0) {
+ fdt_del_node(blob, nodeoff);
+ }
+}
+
+void fdt_del_ifc(void *blob)
+{
+ int nodeoff = 0;
+
+ while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+ "fsl,ifc")) >= 0) {
+ fdt_del_node(blob, nodeoff);
+ }
+}
+
+void fdt_disable_uart1(void *blob)
+{
+ int nodeoff;
+
+ nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,ns16550",
+ CONFIG_SYS_NS16550_COM2);
+
+ if (nodeoff > 0) {
+ fdt_status_disabled(blob, nodeoff);
+ } else {
+ printf("WARNING unable to set status for fsl,ns16550 "
+ "uart1: %s\n", fdt_strerror(nodeoff));
+ }
+}
+
+int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
struct cpu_type *cpu;
- cpu = gd->cpu;
+ cpu = gd->arch.cpu;
ft_cpu_setup(blob, bd);
- base = getenv_bootm_low();
- size = getenv_bootm_size();
+ base = env_get_bootm_low();
+ size = env_get_bootm_size();
#if defined(CONFIG_PCI)
FT_FSL_PCI_SETUP;
fdt_fixup_memory(blob, (u64)base, (u64)size);
#if defined(CONFIG_HAS_FSL_DR_USB)
- fdt_fixup_dr_usb(blob, bd);
+ fsl_fdt_fixup_dr_usb(blob, bd);
#endif
/* P1014 and it's derivatives don't support CAN and eTSEC3 */
- if (cpu->soc_ver == SVR_P1014 || cpu->soc_ver == SVR_P1014_E) {
+ if (cpu->soc_ver == SVR_P1014) {
fdt_del_flexcan(blob);
fdt_del_node_and_alias(blob, "ethernet2");
}
-#ifndef CONFIG_SDCARD
+
+ /* Delete IFC node as IFC pins are multiplexing with SDHC */
+ if (sd_ifc_mux != MUX_TYPE_IFC)
+ fdt_del_ifc(blob);
+ else
+ fdt_del_sdhc(blob);
+
if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
- printf("fdt CAN");
fdt_del_tdm(blob);
fdt_del_spi_slic(blob);
- }
-#ifndef CONFIG_SPIFLASH
- else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
- printf("fdt TDM");
+ } else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
fdt_del_flexcan(blob);
fdt_del_spi_flash(blob);
+ fdt_disable_uart1(blob);
+ } else {
+ /*
+ * If we don't set fsl_p1010mux:tdm_can to "can" or "tdm"
+ * explicitly, defaultly spi_cs_sel to spi-flash instead of
+ * to tdm/slic.
+ */
+ fdt_del_tdm(blob);
+ fdt_del_flexcan(blob);
+ fdt_disable_uart1(blob);
}
+
+ return 0;
+}
#endif
-#endif
+
+#ifdef CONFIG_SDCARD
+int board_mmc_init(bd_t *bis)
+{
+ config_board_mux(MUX_TYPE_SDHC);
+ return -1;
+}
+#else
+void board_reset(void)
+{
+ /* mux to IFC to enable CPLD for reset */
+ if (sd_ifc_mux != MUX_TYPE_IFC)
+ config_board_mux(MUX_TYPE_IFC);
}
#endif
-#ifndef CONFIG_SDCARD
+
int misc_init_r(void)
{
- struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
MPC85xx_PMUXCR_CAN1_UART |
MPC85xx_PMUXCR_CAN2_TDM |
MPC85xx_PMUXCR_CAN2_UART);
- out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART);
- }
-#ifndef CONFIG_SPIFLASH
- if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
- printf("TDM");
+ config_board_mux(MUX_TYPE_CAN);
+ } else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_UART |
MPC85xx_PMUXCR_CAN1_UART);
setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_TDM |
MPC85xx_PMUXCR_CAN1_TDM);
clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_GPIO);
setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_TDM);
- out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM);
- out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC);
- }
+ config_board_mux(MUX_TYPE_TDM);
+ } else {
+ /* defaultly spi_cs_sel to flash */
+ config_board_mux(MUX_TYPE_SPIFLASH);
+ }
+
+ if (hwconfig("esdhc"))
+ config_board_mux(MUX_TYPE_SDHC);
+ else if (hwconfig("ifc"))
+ config_board_mux(MUX_TYPE_IFC);
+
+#ifdef CONFIG_TARGET_P1010RDB_PB
+ setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS);
#endif
return 0;
}
-#endif
+
+static int pin_mux_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ if (argc < 2)
+ return CMD_RET_USAGE;
+ if (strcmp(argv[1], "ifc") == 0)
+ config_board_mux(MUX_TYPE_IFC);
+ else if (strcmp(argv[1], "sdhc") == 0)
+ config_board_mux(MUX_TYPE_SDHC);
+ else
+ return CMD_RET_USAGE;
+ return 0;
+}
+
+U_BOOT_CMD(
+ mux, 2, 0, pin_mux_cmd,
+ "configure multiplexing pin for IFC/SDHC bus in runtime",
+ "bus_type (e.g. mux sdhc)"
+);
projects / people / ms / u-boot.git / blobdiff