#define AVAIL_SIZE (DEVICE_SIZE*MAX_FLASH_DEVICES - RESERVED_CELLS*CELL_SIZE)
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
static __u16 toggling_bits;
case AMD_ID_LV160B:
info->flash_id +=
(FLASH_AM160LV | FLASH_AM160B) & FLASH_TYPEMASK;
- info->sector_count = CFG_MAX_FLASH_SECT;
- info->size = CFG_FLASH_SIZE;
+ info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+ info->size = CONFIG_SYS_FLASH_SIZE;
/* 1*16K Boot Block
2*8K Parameter Block
1*32K Small Main Block */
info->start[2] = baseaddr + 0x6000;
info->start[3] = baseaddr + 0x8000;
for (i = 1; i < info->sector_count; i++)
- info->start[3 + i] = baseaddr + i * CFG_MAIN_SECT_SIZE;
+ info->start[3 + i] = baseaddr + i * CONFIG_SYS_MAIN_SECT_SIZE;
break;
default:
info->flash_id = FLASH_UNKNOWN;
int i;
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Static FLASH Bank configuration here (only one bank) */
- size = flash_get_size (CFG_FLASH_BASE, &flash_info[0]);
+ size = flash_get_size (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN || size == 0) {
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
* protect monitor and environment sectors
*/
flash_protect (FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
&flash_info[0]);
flash_protect (FLAG_PROTECT_SET,
/* arm simple, non interrupt dependent timer */
reset_timer_masked ();
while (flash_check_erase_amd (info->start[sect])) {
- if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("timeout!\n");
/* OOPS: reach timeout,
* try to reset chip
reset_timer_masked ();
while (flash_check_write_amd (dest)) {
- if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
printf ("timeout! @ %08lX\n", dest);
/* OOPS: reach timeout,
* try to reset chip */