#define FLASH_CYCLE1 0x0555
#define FLASH_CYCLE2 0x02aa
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
flash_preinit();
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
memset(&flash_info[i], 0, sizeof(flash_info_t));
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Query flash chip */
flash_info[0].size =
- flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]);
+ flash_get_size((FPW *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
size += flash_info[0].size;
/* get the h/w and s/w protection status in sync */
flash_sync_real_protect(&flash_info[0]);
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
- flash_get_info(CFG_MONITOR_BASE));
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+ flash_get_info(CONFIG_SYS_MONITOR_BASE));
#endif
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
/* ENV protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR+CFG_ENV_SIZE-1,
- flash_get_info(CFG_ENV_ADDR));
+ CONFIG_ENV_ADDR,
+ CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
+ flash_get_info(CONFIG_ENV_ADDR));
#endif
int i;
flash_info_t * info;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
info = & flash_info[i];
if (info->size &&
info->start[0] <= base &&
break;
}
- return (i == CFG_MAX_FLASH_BANKS ? 0 : info);
+ return (i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info);
}
/*-----------------------------------------------------------------------
int i;
uchar *boottype;
uchar *bootletter;
- uchar *fmt;
+ char *fmt;
uchar botbootletter[] = "B";
uchar topbootletter[] = "T";
uchar botboottype[] = "bottom boot sector";
udelay (1000);
while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = (FPW) INTEL_SUSPEND;/* suspend erase */
flash_reset(info); /* reset to read mode */
}
/* show that we're waiting */
- if ((get_timer(last)) > CFG_HZ) { /* every second */
+ if ((get_timer(last)) > CONFIG_SYS_HZ) { /* every second */
putc ('.');
last = get_timer(0);
}
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
- printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
+ printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
return (2);
}
/* Disable interrupts which might cause a timeout here */
/* wait while polling the status register */
while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*addr = (FPW) INTEL_RESET; /* restore read mode */
return (1);
}
start = get_timer (0);
while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
- if (get_timer (start) > CFG_FLASH_UNLOCK_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
printf ("Flash lock bit operation timed out\n");
rc = 1;
break;
while ((*addr & INTEL_FINISHED) !=
INTEL_FINISHED) {
if (get_timer (start) >
- CFG_FLASH_UNLOCK_TOUT) {
+ CONFIG_SYS_FLASH_UNLOCK_TOUT) {
printf ("Flash lock bit operation timed out\n");
rc = 1;
break;
/*
* first, wait for the WSM to be finished. The rationale for
* waiting for the WSM to become idle for at most
- * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
+ * CONFIG_SYS_FLASH_ERASE_TOUT is as follows. The WSM can be busy
* because of: (1) erase, (2) program or (3) lock bit
* configuration. So we just wait for the longest timeout of
* the (1)-(3), i.e. the erase timeout.
start = get_timer (0);
while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
- if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
*addr = (FPW) INTEL_RESET; /* restore read mode */
printf("WSM busy too long, can't get prot status\n");
return 1;
return ret;
}
-