#include <common.h>
#include <malloc.h>
+#include <dm.h>
+#include <dm/platform_data/serial_sh.h>
#include <asm/processor.h>
#include <asm/mach-types.h>
#include <asm/io.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/arch/rmobile.h>
#include <asm/arch/rcar-mstp.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/sh_sdhi.h>
#include <netdev.h>
#include <miiphy.h>
#include <i2c.h>
#define ETHER_MSTP813 (1 << 13)
#define IIC1_MSTP323 (1 << 23)
#define MMC0_MSTP315 (1 << 15)
+#define SDHI1_MSTP312 (1 << 12)
+
+#define SD1CKCR 0xE6150078
+#define SD1_97500KHZ 0x7
int board_early_init_f(void)
{
/* MMC */
mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315);
#endif
+
+#ifdef CONFIG_SH_SDHI
+ /* SDHI1 */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SDHI1_MSTP312);
+
+ /*
+ * Set SD1 to the 97.5MHz
+ */
+ writel(SD1_97500KHZ, SD1CKCR);
+#endif
return 0;
}
+/* LSI pin pull-up control */
+#define PUPR3 0xe606010C
+#define PUPR3_ETH 0x006FF800
+#define PUPR1 0xe6060104
+#define PUPR1_DREQ0_N (1 << 20)
int board_init(void)
{
/* adress of boot parameters */
gpio_request(GPIO_FN_IRQ8, NULL);
/* PHY reset */
+ mstp_clrbits_le32(PUPR3, PUPR3, PUPR3_ETH);
gpio_request(GPIO_GP_1_24, NULL);
+ mstp_clrbits_le32(PUPR1, PUPR1, PUPR1_DREQ0_N);
+
gpio_direction_output(GPIO_GP_1_24, 0);
mdelay(20);
gpio_set_value(GPIO_GP_1_24, 1);
unsigned char enetaddr[6];
ret = sh_eth_initialize(bis);
- if (!eth_getenv_enetaddr("ethaddr", enetaddr))
+ if (!eth_env_get_enetaddr("ethaddr", enetaddr))
return ret;
/* Set Mac address */
int board_mmc_init(bd_t *bis)
{
- int ret = 0;
+ int ret = -ENODEV;
#ifdef CONFIG_SH_MMCIF
/* MMC0 */
gpio_request(GPIO_GP_4_31, NULL);
- gpio_set_value(GPIO_GP_4_31, 1);
+ gpio_direction_output(GPIO_GP_4_31, 1);
ret = mmcif_mmc_init();
#endif
+
+#ifdef CONFIG_SH_SDHI
+ gpio_request(GPIO_FN_SD1_DATA0, NULL);
+ gpio_request(GPIO_FN_SD1_DATA1, NULL);
+ gpio_request(GPIO_FN_SD1_DATA2, NULL);
+ gpio_request(GPIO_FN_SD1_DATA3, NULL);
+ gpio_request(GPIO_FN_SD1_CLK, NULL);
+ gpio_request(GPIO_FN_SD1_CMD, NULL);
+ gpio_request(GPIO_FN_SD1_CD, NULL);
+
+ /* SDHI 1 */
+ gpio_request(GPIO_GP_4_26, NULL);
+ gpio_request(GPIO_GP_4_29, NULL);
+ gpio_direction_output(GPIO_GP_4_26, 1);
+ gpio_direction_output(GPIO_GP_4_29, 1);
+
+ ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI1_BASE, 1, 0);
+#endif
return ret;
}
}
const struct rmobile_sysinfo sysinfo = {
- CONFIG_RMOBILE_BOARD_STRING
+ CONFIG_ARCH_RMOBILE_BOARD_STRING
};
void reset_cpu(ulong addr)
val |= 0x02;
i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
}
+
+static const struct sh_serial_platdata serial_platdata = {
+ .base = SCIF2_BASE,
+ .type = PORT_SCIF,
+ .clk = 14745600,
+ .clk_mode = EXT_CLK,
+};
+
+U_BOOT_DEVICE(silk_serials) = {
+ .name = "serial_sh",
+ .platdata = &serial_platdata,
+};