/*
* Copyright (C) 2003 Travis B. Sawyer <travis.sawyer@sandburst.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <console.h>
#include <asm/processor.h>
#include <spd_sdram.h>
#include <i2c.h>
int checkboard(void)
{
- char *s;
+ char buf[64];
+ int i;
printf("Board: X-ES %s PMC SBC\n", CONFIG_SYS_BOARD_NAME);
printf(" ");
- s = getenv("board_rev");
- if (s)
- printf("Rev %s, ", s);
- s = getenv("serial#");
- if (s)
- printf("Serial# %s, ", s);
- s = getenv("board_cfg");
- if (s)
- printf("Cfg %s", s);
+ i = getenv_f("board_rev", buf, sizeof(buf));
+ if (i > 0)
+ printf("Rev %s, ", buf);
+ i = getenv_f("serial#", buf, sizeof(buf));
+ if (i > 0)
+ printf("Serial# %s, ", buf);
+ i = getenv_f("board_cfg", buf, sizeof(buf));
+ if (i > 0)
+ printf("Cfg %s", buf);
printf("\n");
return 0;
}
-phys_size_t initdram(int board_type)
+int initdram(void)
{
- return spd_sdram();
+ gd->ram_size = spd_sdram();
+
+ return 0;
}
/*
+ * Override weak pci_pre_init()
+ *
* This routine is called just prior to registering the hose and gives
* the board the opportunity to check things. Returning a value of zero
* indicates that things are bad & PCI initialization should be aborted.
* (add regions, override default access routines, etc) or perform
* certain pre-initialization actions.
*/
-
#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller * hose)
{
return 0;
#if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV)
- /* Setup System Device Register PCIX0_XCR */
+ /* Setup System Device Register PCIL0_XCR */
mfsdr(SDR0_XCR, strap);
strap &= 0x0f000000;
mtsdr(SDR0_XCR, strap);
}
#endif /* defined(CONFIG_PCI) */
-#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
-/*
- * The bootstrap configuration provides default settings for the pci
- * inbound map (PIM). But the bootstrap config choices are limited and
- * may not be sufficient for a given board.
- */
-void pci_target_init(struct pci_controller * hose)
-{
- /* Disable everything */
- out32r(PCIX0_PIM0SA, 0);
- out32r(PCIX0_PIM1SA, 0);
- out32r(PCIX0_PIM2SA, 0);
- out32r(PCIX0_EROMBA, 0); /* disable expansion rom */
-
- /*
- * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
- * options to not support sizes such as 128/256 MB.
- */
- out32r(PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
- out32r(PCIX0_PIM0LAH, 0);
- out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
-
- out32r(PCIX0_BAR0, 0);
-
- /* Program the board's subsystem id/vendor id */
- out16r(PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
- out16r(PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
-
- out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
-}
-#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
-
#if defined(CONFIG_PCI)
/*
+ * Override weak is_pci_host()
+ *
* This routine is called to determine if a pci scan should be
* performed. With various hardware environments (especially cPCI and
* PPMC) it's insufficient to depend on the state of the arbiter enable
{
return ctrlc();
}
-
-void post_word_store(ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
-
- *save_addr = a;
-}
-
-ulong post_word_load(void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
-
- return *save_addr;
-}
#endif