Calls to show_boot_progress() will also result in log entries but
these will not have names.
+config SPL_BOOTSTAGE
+ bool "Boot timing and reported in SPL"
+ depends on BOOTSTAGE
+ help
+ Enable recording of boot time in SPL. To make this visible to U-Boot
+ proper, enable BOOTSTAGE_STASH as well. This will stash the timing
+ information when SPL finishes and load it when U-Boot proper starts
+ up.
+
config BOOTSTAGE_REPORT
bool "Display a detailed boot timing report before booting the OS"
depends on BOOTSTAGE
29,916,167 26,005,792 bootm_start
30,361,327 445,160 start_kernel
-config BOOTSTAGE_USER_COUNT
- hex "Number of boot ID numbers available for user use"
- default 20
+config BOOTSTAGE_RECORD_COUNT
+ int "Number of boot stage records to store"
+ default 30
+ help
+ This is the size of the bootstage record list and is the maximum
+ number of bootstage records that can be recorded.
+
+config SPL_BOOTSTAGE_RECORD_COUNT
+ int "Number of boot stage records to store for SPL"
+ default 5
help
- This is the number of available user bootstage records.
- Each time you call bootstage_mark(BOOTSTAGE_ID_ALLOC, ...)
- a new ID will be allocated from this stash. If you exceed
- the limit, recording will stop.
+ This is the size of the bootstage record list and is the maximum
+ number of bootstage records that can be recorded.
config BOOTSTAGE_FDT
bool "Store boot timing information in the OS device tree"
config BOOTSTAGE_STASH_SIZE
hex "Size of boot timing stash region"
- default 4096
+ default 0x1000
help
This should be large enough to hold the bootstage stash. A value of
4096 (4KiB) is normally plenty.
See doc/README.autoboot for details.
+config USE_BOOTARGS
+ bool "Enable boot arguments"
+ help
+ Provide boot arguments to bootm command. Boot arguments are specified
+ in CONFIG_BOOTARGS option. Enable this option to be able to specify
+ CONFIG_BOOTARGS string. If this option is disabled, CONFIG_BOOTARGS
+ will be undefined and won't take any space in U-Boot image.
+
+config BOOTARGS
+ string "Boot arguments"
+ depends on USE_BOOTARGS
+ help
+ This can be used to pass arguments to the bootm command. The value of
+ CONFIG_BOOTARGS goes into the environment value "bootargs". Note that
+ this value will also override the "chosen" node in FDT blob.
+
+config USE_BOOTCOMMAND
+ bool "Enable a default value for bootcmd"
+ help
+ Provide a default value for the bootcmd entry in the environment. If
+ autoboot is enabled this is what will be run automatically. Enable
+ this option to be able to specify CONFIG_BOOTCOMMAND as a string. If
+ this option is disabled, CONFIG_BOOTCOMMAND will be undefined and
+ won't take any space in U-Boot image.
+
+config BOOTCOMMAND
+ string "bootcmd value"
+ depends on USE_BOOTCOMMAND
+ default "run distro_bootcmd" if DISTRO_DEFAULTS
+ help
+ This is the string of commands that will be used as bootcmd and if
+ AUTOBOOT is set, automatically run.
+
menu "Console"
config MENU
help
This options adds the board specific name to u-boot version.
+config LOGLEVEL
+ int "loglevel"
+ default 4
+ range 0 8
+ help
+ All Messages with a loglevel smaller than the console loglevel will
+ be compiled in. The loglevels are defined as follows:
+
+ 0 (KERN_EMERG) system is unusable
+ 1 (KERN_ALERT) action must be taken immediately
+ 2 (KERN_CRIT) critical conditions
+ 3 (KERN_ERR) error conditions
+ 4 (KERN_WARNING) warning conditions
+ 5 (KERN_NOTICE) normal but significant condition
+ 6 (KERN_INFO) informational
+ 7 (KERN_DEBUG) debug-level messages
+
+config SPL_LOGLEVEL
+ int
+ default LOGLEVEL
+
config SILENT_CONSOLE
bool "Support a silent console"
help
help
This option is used to set the default fdt file to boot OS.
-config SYS_NO_FLASH
- bool "Disable support for parallel NOR flash"
- default n
- help
- This option is used to disable support for parallel NOR flash.
-
config VERSION_VARIABLE
bool "add U-Boot environment variable vers"
default n
Any change to this variable will be reverted at the
next reset.
+config BOARD_LATE_INIT
+ bool
+ help
+ Sometimes board require some initialization code that might
+ require once the actual init done, example saving board specific env,
+ boot-modes etc. which eventually done at late.
+
+ So this config enable the late init code with the help of board_late_init
+ function which should defined on respective boards.
+
config DISPLAY_CPUINFO
bool "Display information about the CPU during start up"
- default y if ARM || BLACKFIN || NIOS2 || X86 || XTENSA
+ default y if ARM || NIOS2 || X86 || XTENSA
help
Display information about the CPU that U-Boot is running on
when U-Boot starts up. The function print_cpuinfo() is called
config DISPLAY_BOARDINFO
bool "Display information about the board during start up"
- default y if ARM || M68K || MIPS || PPC || SPARC || XTENSA
+ default y if ARM || M68K || MIPS || PPC || SANDBOX || XTENSA
help
Display information about the board that U-Boot is running on
when U-Boot starts up. The board function checkboard() is called
to do this.
+menu "Start-up hooks"
+
+config ARCH_EARLY_INIT_R
+ bool "Call arch-specific init soon after relocation"
+ help
+ With this option U-Boot will call arch_early_init_r() soon after
+ relocation. Driver model is running by this point, and the cache
+ is on. Note that board_early_init_r() is called first, if
+ enabled. This can be used to set up architecture-specific devices.
+
+config ARCH_MISC_INIT
+ bool "Call arch-specific init after relocation, when console is ready"
+ help
+ With this option U-Boot will call arch_misc_init() after
+ relocation to allow miscellaneous arch-dependent initialisation
+ to be performed. This function should be defined by the board
+ and will be called after the console is set up, after relocaiton.
+
+config BOARD_EARLY_INIT_F
+ bool "Call board-specific init before relocation"
+ help
+ Some boards need to perform initialisation as soon as possible
+ after boot. With this option, U-Boot calls board_early_init_f()
+ after driver model is ready in the pre-relocation init sequence.
+ Note that the normal serial console is not yet set up, but the
+ debug UART will be available if enabled.
+
+endmenu
+
+menu "Security support"
+
+config HASH
+ bool # "Support hashing API (SHA1, SHA256, etc.)"
+ help
+ This provides a way to hash data in memory using various supported
+ algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
+ and the algorithms it supports are defined in common/hash.c. See
+ also CMD_HASH for command-line access.
+
+endmenu
+
source "common/spl/Kconfig"
projects / people / ms / u-boot.git / blobdiff