#include <i2c.h>
#include <initcall.h>
#include <logbuff.h>
+#include <malloc.h>
+#include <mapmem.h>
/* TODO: Can we move these into arch/ headers? */
#ifdef CONFIG_8xx
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/sections.h>
-#ifdef CONFIG_X86
+#if defined(CONFIG_X86) || defined(CONFIG_ARC)
#include <asm/init_helpers.h>
#include <asm/relocate.h>
#endif
#endif
/*
- * sjg: IMO this code should be
+ * TODO(sjg@chromium.org): IMO this code should be
* refactored to a single function, something like:
*
* void led_set_state(enum led_colour_t colour, int on);
return 0;
}
-#ifdef CONFIG_OF_HOSTFILE
-
-static int read_fdt_from_file(void)
-{
- struct sandbox_state *state = state_get_current();
- const char *fname = state->fdt_fname;
- void *blob;
- loff_t size;
- int err;
- int fd;
-
- blob = map_sysmem(CONFIG_SYS_FDT_LOAD_ADDR, 0);
- if (!state->fdt_fname) {
- err = fdt_create_empty_tree(blob, 256);
- if (!err)
- goto done;
- printf("Unable to create empty FDT: %s\n", fdt_strerror(err));
- return -EINVAL;
- }
-
- err = os_get_filesize(fname, &size);
- if (err < 0) {
- printf("Failed to file FDT file '%s'\n", fname);
- return err;
- }
- fd = os_open(fname, OS_O_RDONLY);
- if (fd < 0) {
- printf("Failed to open FDT file '%s'\n", fname);
- return -EACCES;
- }
- if (os_read(fd, blob, size) != size) {
- os_close(fd);
- return -EIO;
- }
- os_close(fd);
-
-done:
- gd->fdt_blob = blob;
-
- return 0;
-}
-#endif
-
#ifdef CONFIG_SANDBOX
static int setup_ram_buf(void)
{
}
#endif
-static int setup_fdt(void)
-{
-#ifdef CONFIG_OF_CONTROL
-# ifdef CONFIG_OF_EMBED
- /* Get a pointer to the FDT */
- gd->fdt_blob = __dtb_dt_begin;
-# elif defined CONFIG_OF_SEPARATE
- /* FDT is at end of image */
- gd->fdt_blob = (ulong *)&_end;
-# elif defined(CONFIG_OF_HOSTFILE)
- if (read_fdt_from_file()) {
- puts("Failed to read control FDT\n");
- return -1;
- }
-# endif
- /* Allow the early environment to override the fdt address */
- gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
- (uintptr_t)gd->fdt_blob);
-#endif
- return 0;
-}
-
/* Get the top of usable RAM */
__weak ulong board_get_usable_ram_top(ulong total_size)
{
#ifdef CONFIG_SYS_SDRAM_BASE
/*
- * Detect whether we have so much RAM it goes past the end of our
+ * Detect whether we have so much RAM that it goes past the end of our
* 32-bit address space. If so, clip the usable RAM so it doesn't.
*/
if (gd->ram_top < CONFIG_SYS_SDRAM_BASE)
#if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) && \
!defined(CONFIG_ARM) && !defined(CONFIG_X86) && \
- !defined(CONFIG_BLACKFIN)
+ !defined(CONFIG_BLACKFIN) && !defined(CONFIG_M68K)
static int reserve_video(void)
{
/* reserve memory for video display (always full pages) */
static int reserve_fdt(void)
{
/*
- * If the device tree is sitting immediate above our image then we
+ * If the device tree is sitting immediately above our image then we
* must relocate it. If it is embedded in the data section, then it
* will be relocated with other data.
*/
gd->start_addr_sp &= ~0xf;
/*
- * let the architecture specific code tailor gd->start_addr_sp and
+ * let the architecture-specific code tailor gd->start_addr_sp and
* gd->irq_sp
*/
return arch_reserve_stacks();
/*
* Save local variables to board info struct
*/
-
bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of memory */
bd->bi_memsize = gd->ram_size; /* size in bytes */
* similarly for all archs. When we do generic relocation, hopefully
* we can make all archs enable the dcache prior to relocation.
*/
-#ifdef CONFIG_X86
+#if defined(CONFIG_X86) || defined(CONFIG_ARC)
/*
* SDRAM and console are now initialised. The final stack can now
* be setup in SDRAM. Code execution will continue in Flash, but
return 0;
}
-static int initf_malloc(void)
-{
-#ifdef CONFIG_SYS_MALLOC_F_LEN
- assert(gd->malloc_base); /* Set up by crt0.S */
- gd->malloc_limit = gd->malloc_base + CONFIG_SYS_MALLOC_F_LEN;
- gd->malloc_ptr = 0;
-#endif
-
- return 0;
-}
-
static int initf_dm(void)
{
#if defined(CONFIG_DM) && defined(CONFIG_SYS_MALLOC_F_LEN)
return 0;
}
+__weak int arch_cpu_init_dm(void)
+{
+ return 0;
+}
+
static init_fnc_t init_sequence_f[] = {
#ifdef CONFIG_SANDBOX
setup_ram_buf,
#endif
setup_mon_len,
- setup_fdt,
+#ifdef CONFIG_OF_CONTROL
+ fdtdec_setup,
+#endif
#ifdef CONFIG_TRACE
trace_early_init,
#endif
#endif
arch_cpu_init, /* basic arch cpu dependent setup */
mark_bootstage,
-#ifdef CONFIG_OF_CONTROL
- fdtdec_check_fdt,
-#endif
initf_dm,
+ arch_cpu_init_dm,
#if defined(CONFIG_BOARD_EARLY_INIT_F)
board_early_init_f,
#endif
/* TODO: Why the dependency on CONFIG_8xx? */
#if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) && \
!defined(CONFIG_ARM) && !defined(CONFIG_X86) && \
- !defined(CONFIG_BLACKFIN)
+ !defined(CONFIG_BLACKFIN) && !defined(CONFIG_M68K)
reserve_video,
#endif
#if !defined(CONFIG_BLACKFIN) && !defined(CONFIG_NIOS2)
INIT_FUNC_WATCHDOG_RESET
reloc_fdt,
setup_reloc,
-#ifdef CONFIG_X86
+#if defined(CONFIG_X86) || defined(CONFIG_ARC)
copy_uboot_to_ram,
clear_bss,
do_elf_reloc_fixups,
#endif
}
-#ifdef CONFIG_X86
+#if defined(CONFIG_X86) || defined(CONFIG_ARC)
/*
* For now this code is only used on x86.
*
/* NOTREACHED - board_init_r() does not return */
hang();
}
-#else
+#endif /* CONFIG_X86 */
+
+#ifndef CONFIG_X86
ulong board_init_f_mem(ulong top)
{
/* Leave space for the stack we are running with now */
return top;
}
-#endif /* CONFIG_X86 */
+#endif /* !CONFIG_X86 */
projects / people / ms / u-boot.git / blobdiff