#include <status_led.h>
#endif
-#ifdef CONFIG_HAS_DATAFLASH
-#include <dataflash.h>
-#endif
-
#ifdef CONFIG_LOGBUFFER
#include <logbuff.h>
#endif
{ IH_TYPE_ZYNQIMAGE, "zynqimage", "Xilinx Zynq Boot Image" },
{ IH_TYPE_ZYNQMPIMAGE, "zynqmpimage", "Xilinx ZynqMP Boot Image" },
{ IH_TYPE_FPGA, "fpga", "FPGA Image" },
+ { IH_TYPE_TEE, "tee", "Trusted Execution Environment Image",},
+ { IH_TYPE_FIRMWARE_IVT, "firmware_ivt", "Firmware with HABv4 IVT" },
+ { IH_TYPE_PMMC, "pmmc", "TI Power Management Micro-Controller Firmware",},
{ -1, "", "", },
};
printf("%s Offset = 0x%08lx\n", p, data);
}
}
+ } else if (image_check_type(hdr, IH_TYPE_FIRMWARE_IVT)) {
+ printf("HAB Blocks: 0x%08x 0x0000 0x%08x\n",
+ image_get_load(hdr) - image_get_header_size(),
+ image_get_size(hdr) + image_get_header_size()
+ - 0x1FE0);
}
}
* flag. Verification done covers data and header integrity and os/type/arch
* fields checking.
*
- * If dataflash support is enabled routine checks for dataflash addresses
- * and handles required dataflash reads.
- *
* returns:
* pointer to a ramdisk image header, if image was found and valid
* otherwise, return NULL
}
U_BOOT_ENV_CALLBACK(loadaddr, on_loadaddr);
-ulong getenv_bootm_low(void)
+ulong env_get_bootm_low(void)
{
- char *s = getenv("bootm_low");
+ char *s = env_get("bootm_low");
if (s) {
ulong tmp = simple_strtoul(s, NULL, 16);
return tmp;
#endif
}
-phys_size_t getenv_bootm_size(void)
+phys_size_t env_get_bootm_size(void)
{
phys_size_t tmp, size;
phys_addr_t start;
- char *s = getenv("bootm_size");
+ char *s = env_get("bootm_size");
if (s) {
tmp = (phys_size_t)simple_strtoull(s, NULL, 16);
return tmp;
size = gd->bd->bi_memsize;
#endif
- s = getenv("bootm_low");
+ s = env_get("bootm_low");
if (s)
tmp = (phys_size_t)simple_strtoull(s, NULL, 16);
else
return size - (tmp - start);
}
-phys_size_t getenv_bootm_mapsize(void)
+phys_size_t env_get_bootm_mapsize(void)
{
phys_size_t tmp;
- char *s = getenv("bootm_mapsize");
+ char *s = env_get("bootm_mapsize");
if (s) {
tmp = (phys_size_t)simple_strtoull(s, NULL, 16);
return tmp;
#if defined(CONFIG_SYS_BOOTMAPSZ)
return CONFIG_SYS_BOOTMAPSZ;
#else
- return getenv_bootm_size();
+ return env_get_bootm_size();
#endif
}
printf("%d Bytes = ", size);
print_size(size, "\n");
#else
- printf("%d Bytes = %.2f kB = %.2f MB\n",
+ printf("%d Bytes = %.2f KiB = %.2f MiB\n",
size, (double)size / 1.024e3,
(double)size / 1.048576e6);
#endif
static const char *unknown_msg(enum ih_category category)
{
+ static const char unknown_str[] = "Unknown ";
static char msg[30];
- strcpy(msg, "Unknown ");
- strcat(msg, table_info[category].desc);
+ strcpy(msg, unknown_str);
+ strncat(msg, table_info[category].desc,
+ sizeof(msg) - sizeof(unknown_str));
return msg;
}
return IMAGE_FORMAT_INVALID;
}
-/**
- * genimg_get_image - get image from special storage (if necessary)
- * @img_addr: image start address
- *
- * genimg_get_image() checks if provided image start address is located
- * in a dataflash storage. If so, image is moved to a system RAM memory.
- *
- * returns:
- * image start address after possible relocation from special storage
- */
-ulong genimg_get_image(ulong img_addr)
-{
- ulong ram_addr = img_addr;
-
-#ifdef CONFIG_HAS_DATAFLASH
- ulong h_size, d_size;
-
- if (addr_dataflash(img_addr)) {
- void *buf;
-
- /* ger RAM address */
- ram_addr = CONFIG_SYS_LOAD_ADDR;
-
- /* get header size */
- h_size = image_get_header_size();
-#if IMAGE_ENABLE_FIT
- if (sizeof(struct fdt_header) > h_size)
- h_size = sizeof(struct fdt_header);
-#endif
-
- /* read in header */
- debug(" Reading image header from dataflash address "
- "%08lx to RAM address %08lx\n", img_addr, ram_addr);
-
- buf = map_sysmem(ram_addr, 0);
- read_dataflash(img_addr, h_size, buf);
-
- /* get data size */
- switch (genimg_get_format(buf)) {
-#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
- case IMAGE_FORMAT_LEGACY:
- d_size = image_get_data_size(buf);
- debug(" Legacy format image found at 0x%08lx, "
- "size 0x%08lx\n",
- ram_addr, d_size);
- break;
-#endif
-#if IMAGE_ENABLE_FIT
- case IMAGE_FORMAT_FIT:
- d_size = fit_get_size(buf) - h_size;
- debug(" FIT/FDT format image found at 0x%08lx, "
- "size 0x%08lx\n",
- ram_addr, d_size);
- break;
-#endif
- default:
- printf(" No valid image found at 0x%08lx\n",
- img_addr);
- return ram_addr;
- }
-
- /* read in image data */
- debug(" Reading image remaining data from dataflash address "
- "%08lx to RAM address %08lx\n", img_addr + h_size,
- ram_addr + h_size);
-
- read_dataflash(img_addr + h_size, d_size,
- (char *)(buf + h_size));
-
- }
-#endif /* CONFIG_HAS_DATAFLASH */
-
- return ram_addr;
-}
-
/**
* fit_has_config - check if there is a valid FIT configuration
* @images: pointer to the bootm command headers structure
}
#endif
- /* copy from dataflash if needed */
- rd_addr = genimg_get_image(rd_addr);
-
/*
* Check if there is an initrd image at the
* address provided in the second bootm argument
ulong initrd_high;
int initrd_copy_to_ram = 1;
- if ((s = getenv("initrd_high")) != NULL) {
+ s = env_get("initrd_high");
+ if (s) {
/* a value of "no" or a similar string will act like 0,
* turning the "load high" feature off. This is intentional.
*/
if (initrd_high == ~0)
initrd_copy_to_ram = 0;
} else {
- initrd_high = getenv_bootm_mapsize() + getenv_bootm_low();
+ initrd_high = env_get_bootm_mapsize() + env_get_bootm_low();
}
/*
* Obtain the os FIT header from the images struct
- * copy from dataflash if needed
*/
tmp_img_addr = map_to_sysmem(images->fit_hdr_os);
- tmp_img_addr = genimg_get_image(tmp_img_addr);
buf = map_sysmem(tmp_img_addr, 0);
/*
* Check image type. For FIT images get FIT node
img_len, BIT_PARTIAL);
}
- printf(" Programming %s bitstream... ", name);
if (err)
- printf("failed\n");
- else
- printf("OK\n");
+ return err;
+
+ printf(" Programming %s bitstream... OK\n", name);
break;
default:
printf("The given image format is not supported (corrupt?)\n");
}
#endif
+static void fit_loadable_process(uint8_t img_type,
+ ulong img_data,
+ ulong img_len)
+{
+ int i;
+ const unsigned int count =
+ ll_entry_count(struct fit_loadable_tbl, fit_loadable);
+ struct fit_loadable_tbl *fit_loadable_handler =
+ ll_entry_start(struct fit_loadable_tbl, fit_loadable);
+ /* For each loadable handler */
+ for (i = 0; i < count; i++, fit_loadable_handler++)
+ /* matching this type */
+ if (fit_loadable_handler->type == img_type)
+ /* call that handler with this image data */
+ fit_loadable_handler->handler(img_data, img_len);
+}
+
int boot_get_loadable(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, const ulong *ld_start, ulong * const ld_len)
{
int conf_noffset;
int fit_img_result;
const char *uname;
+ uint8_t img_type;
/* Check to see if the images struct has a FIT configuration */
if (!genimg_has_config(images)) {
/*
* Obtain the os FIT header from the images struct
- * copy from dataflash if needed
*/
tmp_img_addr = map_to_sysmem(images->fit_hdr_os);
- tmp_img_addr = genimg_get_image(tmp_img_addr);
buf = map_sysmem(tmp_img_addr, 0);
/*
* Check image type. For FIT images get FIT node
/* Something went wrong! */
return fit_img_result;
}
+
+ fit_img_result = fit_image_get_node(buf, uname);
+ if (fit_img_result < 0) {
+ /* Something went wrong! */
+ return fit_img_result;
+ }
+ fit_img_result = fit_image_get_type(buf,
+ fit_img_result,
+ &img_type);
+ if (fit_img_result < 0) {
+ /* Something went wrong! */
+ return fit_img_result;
+ }
+
+ fit_loadable_process(img_type, img_data, img_len);
}
break;
default:
* @cmd_end: pointer to a ulong variable, will hold cmdline end
*
* boot_get_cmdline() allocates space for kernel command line below
- * BOOTMAPSZ + getenv_bootm_low() address. If "bootargs" U-Boot environemnt
+ * BOOTMAPSZ + env_get_bootm_low() address. If "bootargs" U-Boot environemnt
* variable is present its contents is copied to allocated kernel
* command line.
*
char *s;
cmdline = (char *)(ulong)lmb_alloc_base(lmb, CONFIG_SYS_BARGSIZE, 0xf,
- getenv_bootm_mapsize() + getenv_bootm_low());
+ env_get_bootm_mapsize() + env_get_bootm_low());
if (cmdline == NULL)
return -1;
- if ((s = getenv("bootargs")) == NULL)
+ s = env_get("bootargs");
+ if (!s)
s = "";
strcpy(cmdline, s);
* @kbd: double pointer to board info data
*
* boot_get_kbd() allocates space for kernel copy of board info data below
- * BOOTMAPSZ + getenv_bootm_low() address and kernel board info is initialized
+ * BOOTMAPSZ + env_get_bootm_low() address and kernel board info is initialized
* with the current u-boot board info data.
*
* returns:
int boot_get_kbd(struct lmb *lmb, bd_t **kbd)
{
*kbd = (bd_t *)(ulong)lmb_alloc_base(lmb, sizeof(bd_t), 0xf,
- getenv_bootm_mapsize() + getenv_bootm_low());
+ env_get_bootm_mapsize() + env_get_bootm_low());
if (*kbd == NULL)
return -1;
{
ulong of_size = images->ft_len;
char **of_flat_tree = &images->ft_addr;
- ulong *initrd_start = &images->initrd_start;
- ulong *initrd_end = &images->initrd_end;
struct lmb *lmb = &images->lmb;
- ulong rd_len;
int ret;
if (IMAGE_ENABLE_OF_LIBFDT)
return ret;
}
}
- if (IMAGE_ENABLE_RAMDISK_HIGH) {
- rd_len = images->rd_end - images->rd_start;
- ret = boot_ramdisk_high(lmb, images->rd_start, rd_len,
- initrd_start, initrd_end);
- if (ret)
- return ret;
- }
if (IMAGE_ENABLE_OF_LIBFDT) {
ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size);
projects / people / ms / u-boot.git / blobdiff