common: do not compile common fastboot code when building the SPL

[people/ms/u-boot.git] / common / miiphyutil.c

diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index 08aa854efe49bdea3ff3b1e4b948165ed93f21c6..8eb0f761bb0164de32d4a47f69a8b19dd9f98756 100644 (file)
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -107,6 +107,18 @@ int mdio_register(struct mii_dev *bus)
        return 0;
 }
 
+int mdio_register_seq(struct mii_dev *bus, int seq)
+{
+       int ret;
+
+       /* Setup a unique name for each mdio bus */
+       ret = snprintf(bus->name, MDIO_NAME_LEN, "eth%d", seq);
+       if (ret < 0)
+               return ret;
+
+       return mdio_register(bus);
+}
+
 int mdio_unregister(struct mii_dev *bus)
 {
        if (!bus)
@@ -135,7 +147,7 @@ void mdio_list_devices(void)
                        struct phy_device *phydev = bus->phymap[i];
 
                        if (phydev) {
-                               printf("%d - %s", i, phydev->drv->name);
+                               printf("%x - %s", i, phydev->drv->name);
 
                                if (phydev->dev)
                                        printf(" <--> %s\n", phydev->dev->name);
@@ -380,7 +392,7 @@ int miiphy_reset(const char *devname, unsigned char addr)
  */
 int miiphy_speed(const char *devname, unsigned char addr)
 {
-       u16 bmcr, anlpar;
+       u16 bmcr, anlpar, adv;
 
 #if defined(CONFIG_PHY_GIGE)
        u16 btsr;
@@ -417,7 +429,12 @@ int miiphy_speed(const char *devname, unsigned char addr)
                        printf("PHY AN speed");
                        goto miiphy_read_failed;
                }
-               return (anlpar & LPA_100) ? _100BASET : _10BASET;
+
+               if (miiphy_read(devname, addr, MII_ADVERTISE, &adv)) {
+                       puts("PHY AN adv speed");
+                       goto miiphy_read_failed;
+               }
+               return ((anlpar & adv) & LPA_100) ? _100BASET : _10BASET;
        }
        /* Get speed from basic control settings. */
        return (bmcr & BMCR_SPEED100) ? _100BASET : _10BASET;
@@ -433,7 +450,7 @@ miiphy_read_failed:
  */
 int miiphy_duplex(const char *devname, unsigned char addr)
 {
-       u16 bmcr, anlpar;
+       u16 bmcr, anlpar, adv;
 
 #if defined(CONFIG_PHY_GIGE)
        u16 btsr;
@@ -475,7 +492,12 @@ int miiphy_duplex(const char *devname, unsigned char addr)
                        puts("PHY AN duplex");
                        goto miiphy_read_failed;
                }
-               return (anlpar & (LPA_10FULL | LPA_100FULL)) ?
+
+               if (miiphy_read(devname, addr, MII_ADVERTISE, &adv)) {
+                       puts("PHY AN adv duplex");
+                       goto miiphy_read_failed;
+               }
+               return ((anlpar & adv) & (LPA_10FULL | LPA_100FULL)) ?
                    FULL : HALF;
        }
        /* Get speed from basic control settings. */