scsi: move the partition initialization out of the scsi detection

[people/ms/u-boot.git] / configs / A20-OLinuXino-Lime_defconfig

diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
index dea2e6b6f2bc906a81ec82aca5dbb8446693a017..564ae256a35dcbf0d588f996faeb429080504a65 100644 (file)
--- a/configs/A20-OLinuXino-Lime_defconfig
+++ b/configs/A20-OLinuXino-Lime_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
 CONFIG_MMC0_CD_PIN="PH1"
@@ -9,6 +8,7 @@ CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,SATAPWR=SUNXI_GPC(3)"
 CONFIG_SPL=y
+CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
@@ -16,6 +16,10 @@ CONFIG_SPL=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_NET_ETHADDR_EEPROM=y
+CONFIG_NET_ETHADDR_EEPROM_I2C=y
+CONFIG_NET_ETHADDR_EEPROM_I2C_BUS=1
+CONFIG_I2C1_ENABLE=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y