arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS Starter Kit initial support

[people/ms/u-boot.git] / configs / Colombus_defconfig

diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig
index 7fa9ef1efffc21d0acad9084581a20d2271fb4fe..d8272c5dcf139b9cd6126d0fc9ff042e2818358e 100644 (file)
--- a/configs/Colombus_defconfig
+++ b/configs/Colombus_defconfig
@@ -4,13 +4,23 @@ CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_CLK=240
 CONFIG_DRAM_ZQ=251
 CONFIG_USB1_VBUS_PIN=""
+CONFIG_I2C0_ENABLE=y
+CONFIG_AXP_GPIO=y
+CONFIG_VIDEO_LCD_MODE="x:2048,y:1536,depth:24,pclk_khz:208000,le:5,ri:150,up:9,lo:24,hs:5,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_DCLK_PHASE=0
+CONFIG_VIDEO_LCD_POWER="PH27"
+CONFIG_VIDEO_LCD_BL_EN="PM1"
+CONFIG_VIDEO_LCD_BL_PWM="PH13"
+CONFIG_VIDEO_LCD_PANEL_I2C_SDA="PA23"
+CONFIG_VIDEO_LCD_PANEL_I2C_SCL="PA24"
+CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII"
+CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_AXP221_ALDO1_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y