ARM: da850-evm: Enable the USB PHY and MUSB Driver

[thirdparty/u-boot.git] / configs / da850evm_defconfig

diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
index 09c6147e2d1b370504024e8b67d89a4a47e3d2fe..7cbc9fb656289f60de1e51445a0caf6115d0b79f 100644 (file)
--- a/configs/da850evm_defconfig
+++ b/configs/da850evm_defconfig
@@ -21,7 +21,6 @@ CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_TEXT_BASE=0x80000000
-CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_SPI_LOAD=y
@@ -31,13 +30,15 @@ CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_DM=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_GPT is not set
+CONFIG_CMD_MTD=y
+# CONFIG_CMD_SF is not set
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_TIME is not set
 # CONFIG_CMD_EXT4 is not set
 CONFIG_CMD_FS_UUID=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nor0=spi0.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:512k(u-boot.ais),64k(u-boot-env),7552k(kernel-spare),64k(MAC-Address)"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:32k(SPL),480k(u-boot),64k(u-boot-env),7552k(kernel-spare),64k(MAC-Address)"
 CONFIG_CMD_DIAG=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
@@ -47,11 +48,13 @@ CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_SPL_BLOCK_CACHE=y
 CONFIG_DM_GPIO=y
 CONFIG_DA8XX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_DAVINCI=y
 CONFIG_DM_MMC=y
+CONFIG_MTD=y
 CONFIG_MTD_DEVICE=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
@@ -59,8 +62,11 @@ CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SPI_FLASH_MTD=y
+CONFIG_DM_ETH=y
 CONFIG_MII=y
 CONFIG_DRIVER_TI_EMAC=y
+CONFIG_PHY=y
+CONFIG_PHY_DA8XX_USB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_DM_SERIAL=y
@@ -73,5 +79,8 @@ CONFIG_DM_USB=y
 # CONFIG_SPL_DM_USB is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_DA8XX=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_MUSB_DA8XX=y
+CONFIG_USB_MUSB_PIO_ONLY=y
+CONFIG_USB_STORAGE=y
 # CONFIG_FAT_WRITE is not set
-CONFIG_USE_TINY_PRINTF=y