#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for DHCP 4.4.0-dev.
+# Generated by GNU Autoconf 2.69 for DHCP 4.4.2.
#
# Report bugs to <dhcp-users@isc.org>.
#
# Identity of this package.
PACKAGE_NAME='DHCP'
PACKAGE_TARNAME='dhcp'
-PACKAGE_VERSION='4.4.0-dev'
-PACKAGE_STRING='DHCP 4.4.0-dev'
+PACKAGE_VERSION='4.4.2'
+PACKAGE_STRING='DHCP 4.4.2'
PACKAGE_BUGREPORT='dhcp-users@isc.org'
PACKAGE_URL=''
DISTCHECK_ATF_CONFIGURE_FLAG
HAVE_ATF_FALSE
HAVE_ATF_TRUE
-pkgcfg_found
+UNITTESTS
ATF_BIN
ATF_LDFLAGS
ATF_CFLAGS
+pkgcfg_found
BIND_ATF_FALSE
BIND_ATF_TRUE
byte_order
AMDEPBACKSLASH
AMDEP_FALSE
AMDEP_TRUE
-am__quote
am__include
DEPDIR
OBJEXT
PACKAGE_TARNAME
PACKAGE_NAME
PATH_SEPARATOR
-SHELL'
+SHELL
+am__quote'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_delayed_ack
enable_dhcpv6
enable_dhcpv4o6
+enable_relay_port
enable_paranoia
enable_early_chroot
enable_ipv4_pktinfo
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures DHCP 4.4.0-dev to adapt to many kinds of systems.
+\`configure' configures DHCP 4.4.2 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of DHCP 4.4.0-dev:";;
+ short | recursive ) echo "Configuration of DHCP 4.4.2:";;
esac
cat <<\_ACEOF
yes)
--enable-tracing enable support for server activity tracing (default
is yes)
- --enable-delayed-ack queues multiple DHCPACK replies (default is no)
+ --enable-delayed-ack queues multiple DHCPACK replies (default is yes)
--enable-dhcpv6 enable support for DHCPv6 (default is yes)
--enable-dhcpv4o6 enable support for DHCPv4-over-DHCPv6 (default is
no)
+ --enable-relay-port enable support for relay port (default is no)
--enable-paranoia enable support for chroot/setuid (default is no)
--enable-early-chroot enable chrooting prior to configuration (default is
no)
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-atf=PATH specify location where atf was installed (or "bind")
+ --with-atf=PATH specify location where atf was installed
--with-srv-conf-file=PATH
Default file containing dhcpd configuration (default
is typically /etc/dhcpd.conf)
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-DHCP configure 4.4.0-dev
+DHCP configure 4.4.2
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by DHCP $as_me 4.4.0-dev, which was
+It was created by DHCP $as_me 4.4.2, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
# we specify "foreign" to avoid having to have the GNU mandated files,
# like AUTHORS, COPYING, and such
-am__api_version='1.15'
+am__api_version='1.16'
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
# Define the identity of the package.
PACKAGE='dhcp'
- VERSION='4.4.0-dev'
+ VERSION='4.4.2'
cat >>confdefs.h <<_ACEOF
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
mkdir_p='$(MKDIR_P)'
# We need awk for the "check" target (and possibly the TAP driver). The
Aborting the configuration process, to ensure you take notice of the issue.
You can download and install GNU coreutils to get an 'rm' implementation
-that behaves properly: <http://www.gnu.org/software/coreutils/>.
+that behaves properly: <https://www.gnu.org/software/coreutils/>.
If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
ac_config_commands="$ac_config_commands depfiles"
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5
+$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; }
+cat > confinc.mk << 'END'
am__doit:
- @echo this is the am__doit target
+ @echo this is the am__doit target >confinc.out
.PHONY: am__doit
END
-# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
-$as_echo_n "checking for style of include used by $am_make... " >&6; }
am__include="#"
am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
+# BSD make does it like this.
+echo '.include "confinc.mk" # ignored' > confmf.BSD
+# Other make implementations (GNU, Solaris 10, AIX) do it like this.
+echo 'include confinc.mk # ignored' > confmf.GNU
+_am_result=no
+for s in GNU BSD; do
+ { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5
+ (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ case $?:`cat confinc.out 2>/dev/null` in #(
+ '0:this is the am__doit target') :
+ case $s in #(
+ BSD) :
+ am__include='.include' am__quote='"' ;; #(
+ *) :
+ am__include='include' am__quote='' ;;
+esac ;; #(
+ *) :
;;
- esac
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
-$as_echo "$_am_result" >&6; }
-rm -f confinc confmf
+esac
+ if test "$am__include" != "#"; then
+ _am_result="yes ($s style)"
+ break
+ fi
+done
+rm -f confinc.* confmf.*
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5
+$as_echo "${_am_result}" >&6; }
# Check whether --enable-dependency-tracking was given.
if test "${enable_dependency_tracking+set}" = set; then :
fi
-# Delayed-ack feature support (experimental).
+# Delayed-ack feature support.
# Check whether --enable-delayed_ack was given.
if test "${enable_delayed_ack+set}" = set; then :
enableval=$enable_delayed_ack;
fi
-if test "$enable_delayed_ack" = "yes"; then
+if test "$enable_delayed_ack" != "no"; then
+ enable_delayed_ack="yes"
$as_echo "#define DELAYED_ACK 1" >>confdefs.h
-else
- enable_delayed_ack="no"
fi
# DHCPv6 optional compile-time feature.
if test "$enable_dhcpv6" = "no"; then
as_fn_error $? "dhcpv4o6 requires dhcpv6" "$LINENO" 5
fi
- # DHCPv4o6 is not yet compatible with delayed-ack
- if test "$enable_delayed_ack" = "yes"; then
- as_fn_error $? "dhcpv4o6 is not compatible with delayed-ack" "$LINENO" 5
- fi
$as_echo "#define DHCP4o6 1" >>confdefs.h
+else
+ # so we can report below
+ enable_dhcpv4o6="no"
+fi
+
+# Relay port (draft-ietf-dhc-relay-port-10.txt) optional compile-time feature.
+# Check whether --enable-relay-port was given.
+if test "${enable_relay_port+set}" = set; then :
+ enableval=$enable_relay_port;
+fi
+
+# Relay port is off by default (for now)
+if test "$enable_relay_port" = "yes"; then
+
+$as_echo "#define RELAY_PORT 1" >>confdefs.h
+
+else
+ # so we can report below
+ enable_relay_port="no"
fi
# PARANOIA is off by default (until we can test it with all features)
# Testing section
-DISTCHECK_ATF_CONFIGURE_FLAG=
-atf_path="no"
-
-# Check whether --with-atf was given.
-if test "${with_atf+set}" = set; then :
- withval=$with_atf; atf_path="$withval"
-fi
-
- if test "$atf_path" = "bind"; then
+# Bind Makefile needs to know ATF is not included.
+ if test "foo" = "barr"; then
BIND_ATF_TRUE=
BIND_ATF_FALSE='#'
else
BIND_ATF_FALSE=
fi
-if test "$atf_path" = "bind" ; then
- DISTCHECK_ATF_CONFIGURE_FLAG="--with-atf=bind"
- atf_pcp="bind"
- atf_path="\${top_srcdir}/bind/atf"
- ATF_CFLAGS="-I$atf_path/include -DUNIT_TEST"
- ATF_LDFLAGS="-L$atf_path/lib -latf-c"
- ATF_BIN=`cd $srcdir; pwd`/bind/atf/bin
+DISTCHECK_ATF_CONFIGURE_FLAG=
+atf_path="no"
+# Check whether --with-atf was given.
+if test "${with_atf+set}" = set; then :
+ withval=$with_atf; atf_path="$withval"
+fi
- BINDCONFIG="$BINDCONFIG --with-atf"
-elif test "$atf_path" != "no" ; then
+if test "$atf_path" != "no" ; then
DISTCHECK_ATF_CONFIGURE_FLAG="--with-atf=$atf_path"
# Config path for pkg-config
atf_pcp=""
ATF_BIN=$atf_path/bin
fi
- if test ! -x $ATF_BIN/atf-run -o ! -x $ATF_BIN/atf-report ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: atf-run/atf-report not found, assuming they are in your path" >&5
-$as_echo "$as_me: WARNING: atf-run/atf-report not found, assuming they are in your path" >&2;}
- fi
+ UNITTESTS=tests
+
done
# needed for linux/filter.h on old systems
+relay_port_supported="no"
ac_fn_c_check_header_compile "$LINENO" "linux/filter.h" "ac_cv_header_linux_filter_h" "
#ifdef HAVE_LINUX_TYPES_H
#include <linux/types.h>
$as_echo "#define HAVE_LPF 1" >>confdefs.h
+ relay_port_supported="yes"
else
ac_fn_c_check_header_mongrel "$LINENO" "sys/dlpi.h" "ac_cv_header_sys_dlpi_h" "$ac_includes_default"
if test "x$ac_cv_header_sys_dlpi_h" = xyes; then :
$as_echo "#define HAVE_BPF 1" >>confdefs.h
+ relay_port_supported="yes"
fi
fi
fi
+if test "$enable_relay_port" = "yes"; then
+ if test "$relay_port_supported" != "yes"; then
+ as_fn_error $? "--enable-relay-port requires BPF or LPF" "$LINENO" 5
+ fi
+fi
+
# SIOCGLIFCONF uses some transport structures. Trick is not all platforms
# use the same structures. We like to use 'struct lifconf' and 'struct
# lifreq', but we'll use these other structures if they're present. HPUX
LIBS="-lrt $LIBS"
fi
-# check for /dev/random (declares HAVE_DEV_RANDOM)
+# check for /dev/random (declares ISC_PATH_RANDOMDEV)
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for random device" >&5
$as_echo_n "checking for random device... " >&6; }
$as_echo "$ac_res" >&6; }
if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
-$as_echo "#define HAVE_DEV_RANDOM 1" >>confdefs.h
+cat >>confdefs.h <<_ACEOF
+#define ISC_PATH_RANDOMDEV "$use_randomdev"
+_ACEOF
else
as_fn_error $? "cannot find $use_randomdev" "$LINENO" 5
fi
-ac_config_files="$ac_config_files Makefile client/Makefile client/tests/Makefile common/Makefile.am common/Makefile common/tests/Makefile dhcpctl/Makefile.am dhcpctl/Makefile includes/Makefile omapip/Makefile.am omapip/Makefile relay/Makefile server/Makefile tests/Makefile.am tests/Makefile tests/unittest.sh server/tests/Makefile doc/devel/doxyfile"
+ac_config_files="$ac_config_files Makefile client/Makefile client/tests/Makefile common/Makefile.am common/Makefile common/tests/Makefile dhcpctl/Makefile.am dhcpctl/Makefile includes/Makefile keama/Makefile omapip/Makefile.am omapip/Makefile relay/Makefile relay/tests/Makefile server/Makefile tests/Makefile.am tests/Makefile tests/unittest.sh server/tests/Makefile doc/devel/doxyfile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by DHCP $as_me 4.4.0-dev, which was
+This file was extended by DHCP $as_me 4.4.2, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-DHCP config.status 4.4.0-dev
+DHCP config.status 4.4.2
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
#
# INIT-COMMANDS
#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"
_ACEOF
"dhcpctl/Makefile.am") CONFIG_FILES="$CONFIG_FILES dhcpctl/Makefile.am" ;;
"dhcpctl/Makefile") CONFIG_FILES="$CONFIG_FILES dhcpctl/Makefile" ;;
"includes/Makefile") CONFIG_FILES="$CONFIG_FILES includes/Makefile" ;;
+ "keama/Makefile") CONFIG_FILES="$CONFIG_FILES keama/Makefile" ;;
"omapip/Makefile.am") CONFIG_FILES="$CONFIG_FILES omapip/Makefile.am" ;;
"omapip/Makefile") CONFIG_FILES="$CONFIG_FILES omapip/Makefile" ;;
"relay/Makefile") CONFIG_FILES="$CONFIG_FILES relay/Makefile" ;;
+ "relay/tests/Makefile") CONFIG_FILES="$CONFIG_FILES relay/tests/Makefile" ;;
"server/Makefile") CONFIG_FILES="$CONFIG_FILES server/Makefile" ;;
"tests/Makefile.am") CONFIG_FILES="$CONFIG_FILES tests/Makefile.am" ;;
"tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
# Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
+ # TODO: see whether this extra hack can be removed once we start
+ # requiring Autoconf 2.70 or later.
+ case $CONFIG_FILES in #(
+ *\'*) :
+ eval set x "$CONFIG_FILES" ;; #(
+ *) :
+ set x $CONFIG_FILES ;; #(
+ *) :
+ ;;
+esac
shift
- for mf
+ # Used to flag and report bootstrapping failures.
+ am_rc=0
+ for am_mf
do
# Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named 'Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
+ am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile which includes
+ # dependency-tracking related rules and includes.
+ # Grep'ing the whole file directly is not great: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$mf" |
+ sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
+ || continue
+ am_dirpart=`$as_dirname -- "$am_mf" ||
+$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$am_mf" : 'X\(//\)[^/]' \| \
+ X"$am_mf" : 'X\(//\)$' \| \
+ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$am_mf" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
q
}
s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running 'make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "$am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
+ am_filepart=`$as_basename -- "$am_mf" ||
+$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$am_mf" : 'X\(//\)$' \| \
+ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$am_mf" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
- /^X\(\/\/\)$/{
+ /^X\/\(\/\/\)$/{
s//\1/
q
}
- /^X\(\/\).*/{
+ /^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
- as_dir=$dirpart/$fdir; as_fn_mkdir_p
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
+ { echo "$as_me:$LINENO: cd "$am_dirpart" \
+ && sed -e '/# am--include-marker/d' "$am_filepart" \
+ | $MAKE -f - am--depfiles" >&5
+ (cd "$am_dirpart" \
+ && sed -e '/# am--include-marker/d' "$am_filepart" \
+ | $MAKE -f - am--depfiles) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } || am_rc=$?
done
+ if test $am_rc -ne 0; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "Something went wrong bootstrapping makefile fragments
+ for automatic dependency tracking. Try re-running configure with the
+ '--disable-dependency-tracking' option to at least be able to build
+ the package (albeit without support for automatic dependency tracking).
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ { am_dirpart=; unset am_dirpart;}
+ { am_filepart=; unset am_filepart;}
+ { am_mf=; unset am_mf;}
+ { am_rc=; unset am_rc;}
+ rm -f conftest-deps.mk
}
;;
binary-leases: $enable_binary_leases
dhcpv6: $enable_dhcpv6
delayed-ack: $enable_delayed_ack
+ dhcpv4o6: $enable_dhcpv4o6
+ relay-port: $enable_relay_port
Developer:
ATF unittests : $atf_path
projects / thirdparty / dhcp.git / blobdiff