READELF_FOR_TARGET
RANLIB_FOR_TARGET
OBJDUMP_FOR_TARGET
+OBJCOPY_FOR_TARGET
NM_FOR_TARGET
LIPO_FOR_TARGET
LD_FOR_TARGET
with_build_sysroot
with_debug_prefix_map
with_build_config
+enable_vtable_verify
enable_serial_configure
with_build_time_tools
enable_maintainer_mode
LD_FOR_TARGET
LIPO_FOR_TARGET
NM_FOR_TARGET
+OBJCOPY_FOR_TARGET
OBJDUMP_FOR_TARGET
RANLIB_FOR_TARGET
READELF_FOR_TARGET
Mostly useful for compiler development
--enable-objc-gc enable use of Boehm's garbage collector with the GNU
Objective-C runtime
+ --enable-vtable-verify Enable vtable verification feature
--enable-serial-[{host,target,build}-]configure
force sequential configuration of sub-packages for
the host, target or build machine, or all
LIPO for the target
NM_FOR_TARGET
NM for the target
+ OBJCOPY_FOR_TARGET
+ OBJCOPY for the target
OBJDUMP_FOR_TARGET
OBJDUMP for the target
RANLIB_FOR_TARGET
if test "$is_elf" = "yes"; then
# Check for target supported by gold.
case "${target}" in
- i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-* | tilegx*-*-*)
+ i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-* \
+ | aarch64*-*-* | tilegx*-*-*)
configdirs="$configdirs gold"
if test x${ENABLE_GOLD} = xdefault; then
default_ld=gold
rs6000-*-aix*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ ft32-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
*-*-lynxos*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
;;
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss"
+ # this is not caught below because this stanza matches earlier
+ case $target in
+ or1k*-*-*) noconfigdirs="$noconfigdirs gdb" ;;
+ esac
;;
# The tpf target doesn't support gdb yet.
*-*-tpf*)
fr30-*-elf*)
noconfigdirs="$noconfigdirs gdb"
;;
+ ft32-*-*)
+ noconfigdirs="$noconfigdirs target-rda gprof"
+ ;;
moxie-*-*)
- noconfigdirs="$noconfigdirs gprof"
+ noconfigdirs="$noconfigdirs"
;;
h8300*-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
microblaze*)
noconfigdirs="$noconfigdirs gprof"
;;
- mips*-sde-elf* | mips*-mti-elf*)
+ mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*)
if test x$with_newlib = xyes; then
noconfigdirs="$noconfigdirs gprof"
fi
mips*-*-*)
noconfigdirs="$noconfigdirs gprof"
;;
+ nds32*-*-*)
+ noconfigdirs="$noconfigdirs gdb"
+ ;;
+ or1k*-*-*)
+ noconfigdirs="$noconfigdirs gdb"
+ ;;
sh-*-* | sh64-*-*)
case "${target}" in
sh*-*-elf)
tic6x-*-*)
noconfigdirs="$noconfigdirs sim"
;;
- tilepro-*-* | tilegx-*-*)
+ tilepro*-*-* | tilegx*-*-*)
noconfigdirs="$noconfigdirs sim"
;;
v810-*-*)
case ,${enable_languages}, in
*,c++,*) ;;
*)
- noconfigdirs="$noconfigdirs target-libitm target-libsanitizer target-libvtv"
+ noconfigdirs="$noconfigdirs target-libcilkrts target-libitm target-libsanitizer target-libvtv"
;;
esac
spu-*-*)
target_makefile_frag="config/mt-spu"
;;
- mips*-sde-elf* | mips*-mti-elf*)
+ mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*)
target_makefile_frag="config/mt-sde"
;;
mipsisa*-*-elfoabi*)
mips*-*-*linux* | mips*-*-gnu*)
target_makefile_frag="config/mt-mips-gnu"
;;
+ nios2-*-elf*)
+ target_makefile_frag="config/mt-nios2-elf"
+ ;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
target_makefile_frag="config/mt-gnu"
;;
GCC_SHLIB_SUBDIR=
fi
+# Adjust the toplevel makefile according to whether bootstrap was selected.
+case $enable_bootstrap in
+ yes)
+ bootstrap_suffix=bootstrap
+ BUILD_CONFIG=bootstrap-debug
+ ;;
+ no)
+ bootstrap_suffix=no-bootstrap
+ BUILD_CONFIG=
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for default BUILD_CONFIG" >&5
+$as_echo_n "checking for default BUILD_CONFIG... " >&6; }
+
+
+# Check whether --with-build-config was given.
+if test "${with_build_config+set}" = set; then :
+ withval=$with_build_config; case $with_build_config in
+ yes) with_build_config= ;;
+ no) with_build_config= BUILD_CONFIG= ;;
+ esac
+fi
+
+
+if test "x${with_build_config}" != x; then
+ BUILD_CONFIG=$with_build_config
+else
+ case $BUILD_CONFIG in
+ bootstrap-debug)
+ if echo "int f (void) { return 0; }" > conftest.c &&
+ ${CC} -c conftest.c &&
+ mv conftest.o conftest.o.g0 &&
+ ${CC} -c -g conftest.c &&
+ mv conftest.o conftest.o.g &&
+ ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then
+ :
+ else
+ BUILD_CONFIG=
+ fi
+ rm -f conftest.c conftest.o conftest.o.g0 conftest.o.g
+ ;;
+ esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_CONFIG" >&5
+$as_echo "$BUILD_CONFIG" >&6; }
+
+
+# Use same top-level configure hooks in libgcc/libstdc++/libvtv.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for --enable-vtable-verify" >&5
+$as_echo_n "checking for --enable-vtable-verify... " >&6; }
+# Check whether --enable-vtable-verify was given.
+if test "${enable_vtable_verify+set}" = set; then :
+ enableval=$enable_vtable_verify; case "$enableval" in
+ yes) enable_vtable_verify=yes ;;
+ no) enable_vtable_verify=no ;;
+ *) enable_vtable_verify=no;;
+ esac
+else
+ enable_vtable_verify=no
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_vtable_verify" >&5
+$as_echo "$enable_vtable_verify" >&6; }
+
# Record target_configdirs and the configure arguments for target and
# build configuration in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
+bootstrap_fixincludes=no
# If we are building libgomp, bootstrap it.
if echo " ${target_configdirs} " | grep " libgomp " > /dev/null 2>&1 ; then
bootstrap_target_libs=${bootstrap_target_libs}target-libgomp,
fi
-# If we are building libsanitizer, bootstrap it.
-if echo " ${target_configdirs} " | grep " libsanitizer " > /dev/null 2>&1 ; then
- bootstrap_target_libs=${bootstrap_target_libs}target-libsanitizer,
+# If we are building libsanitizer and $BUILD_CONFIG contains bootstrap-asan
+# or bootstrap-ubsan, bootstrap it.
+if echo " ${target_configdirs} " | grep " libsanitizer " > /dev/null 2>&1; then
+ case "$BUILD_CONFIG" in
+ *bootstrap-asan* | *bootstrap-ubsan* )
+ bootstrap_target_libs=${bootstrap_target_libs}target-libsanitizer,
+ bootstrap_fixincludes=yes
+ ;;
+ esac
fi
-# If we are building libvtv, bootstrap it.
-if echo " ${target_configdirs} " | grep " libvtv " > /dev/null 2>&1 ; then
+# If we are building libvtv and --enable-vtable-verify, bootstrap it.
+if echo " ${target_configdirs} " | grep " libvtv " > /dev/null 2>&1 &&
+ test "$enable_vtable_verify" != no; then
bootstrap_target_libs=${bootstrap_target_libs}target-libvtv,
fi
;;
esac
-# Adjust the toplevel makefile according to whether bootstrap was selected.
-case $enable_bootstrap in
- yes)
- bootstrap_suffix=bootstrap
- BUILD_CONFIG=bootstrap-debug
- ;;
- no)
- bootstrap_suffix=no-bootstrap
- BUILD_CONFIG=
- ;;
-esac
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for default BUILD_CONFIG" >&5
-$as_echo_n "checking for default BUILD_CONFIG... " >&6; }
-
-
-# Check whether --with-build-config was given.
-if test "${with_build_config+set}" = set; then :
- withval=$with_build_config; case $with_build_config in
- yes) with_build_config= ;;
- no) with_build_config= BUILD_CONFIG= ;;
- esac
-fi
-
-
-if test "x${with_build_config}" != x; then
- BUILD_CONFIG=$with_build_config
-else
- case $BUILD_CONFIG in
- bootstrap-debug)
- if echo "int f (void) { return 0; }" > conftest.c &&
- ${CC} -c conftest.c &&
- mv conftest.o conftest.o.g0 &&
- ${CC} -c -g conftest.c &&
- mv conftest.o conftest.o.g &&
- ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then
- :
- else
- BUILD_CONFIG=
- fi
- rm -f conftest.c conftest.o conftest.o.g0 conftest.o.g
- ;;
- esac
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_CONFIG" >&5
-$as_echo "$BUILD_CONFIG" >&6; }
-
-
extrasub_build=
for module in ${build_configdirs} ; do
if test -z "${no_recursion}" \
fi
done
fi
+ case ${module},${bootstrap_fixincludes} in
+ fixincludes,no) host_bootstrap_suffix=no-bootstrap ;;
+ *) host_bootstrap_suffix=$bootstrap_suffix ;;
+ esac
extrasub_host="$extrasub_host
/^@if $module\$/d
/^@endif $module\$/d
-/^@if $module-$bootstrap_suffix\$/d
-/^@endif $module-$bootstrap_suffix\$/d"
+/^@if $module-$host_bootstrap_suffix\$/d
+/^@endif $module-$host_bootstrap_suffix\$/d"
done
extrasub_target=
for module in ${target_configdirs} ; do
target_configargs="--with-cross-host=${host_noncanonical} ${target_configargs}"
fi
+# Special user-friendly check for native x86_64-linux build, if
+# multilib is not explicitly enabled.
+case "$target:$have_compiler:$host:$target:$enable_multilib" in
+ x86_64-*linux*:yes:$build:$build:)
+ # Make sure we have a developement environment that handles 32-bit
+ dev64=no
+ echo "int main () { return 0; }" > conftest.c
+ ${CC} -m32 -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
+ if test $? = 0 ; then
+ if test -s conftest || test -s conftest.exe ; then
+ dev64=yes
+ fi
+ fi
+ rm -f conftest*
+ if test x${dev64} != xyes ; then
+ as_fn_error "I suspect your system does not have 32-bit developement libraries (libc and headers). If you have them, rerun configure with --enable-multilib. If you do not have them, and want to build a 64-bit-only compiler, rerun configure with --disable-multilib." "$LINENO" 5
+ fi
+ ;;
+esac
+
# Default to --enable-multilib.
if test x${enable_multilib} = x ; then
target_configargs="--enable-multilib ${target_configargs}"
+if test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objcopy in $with_build_time_tools" >&5
+$as_echo_n "checking for objcopy in $with_build_time_tools... " >&6; }
+ if test -x $with_build_time_tools/objcopy; then
+ OBJCOPY_FOR_TARGET=`cd $with_build_time_tools && pwd`/objcopy
+ ac_cv_path_OBJCOPY_FOR_TARGET=$OBJCOPY_FOR_TARGET
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_OBJCOPY_FOR_TARGET" >&5
+$as_echo "$ac_cv_path_OBJCOPY_FOR_TARGET" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ OBJCOPY_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=objcopy`
+ test $OBJCOPY_FOR_TARGET = objcopy && OBJCOPY_FOR_TARGET=
+ test -n "$OBJCOPY_FOR_TARGET" && ac_cv_path_OBJCOPY_FOR_TARGET=$OBJCOPY_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+ # Extract the first word of "objcopy", so it can be a program name with args.
+set dummy objcopy; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_OBJCOPY_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $OBJCOPY_FOR_TARGET in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $gcc_cv_tool_dirs
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_OBJCOPY_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_path_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" ; then
+
+
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET=$OBJCOPY_FOR_TARGET
+elif test -n "$ac_cv_prog_OBJCOPY_FOR_TARGET"; then
+ OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_OBJCOPY_FOR_TARGET"; then
+ for ncn_progname in objcopy; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJCOPY_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ done
+fi
+
+if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET" && test -n "$with_build_time_tools"; then
+ for ncn_progname in objcopy; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
+$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET"; then
+ for ncn_progname in objcopy; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJCOPY_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJCOPY_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ test -n "$ac_cv_prog_OBJCOPY_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET" ; then
+ set dummy objcopy
+ if test $build = $target ; then
+ OBJCOPY_FOR_TARGET="$2"
+ else
+ OBJCOPY_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+else
+ OBJCOPY_FOR_TARGET="$ac_cv_prog_OBJCOPY_FOR_TARGET"
+fi
+
+else
+ OBJCOPY_FOR_TARGET=$ac_cv_path_OBJCOPY_FOR_TARGET
+fi
+
+
+
+
if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdump in $with_build_time_tools" >&5
fi
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target objcopy" >&5
+$as_echo_n "checking where to find the target objcopy... " >&6; }
+if test "x${build}" != "x${host}" ; then
+ if expr "x$OBJCOPY_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $OBJCOPY_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ else
+ # Canadian cross, just use what we found
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ OBJCOPY_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/objcopy'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
+$as_echo "just compiled" >&6; }
+ elif expr "x$OBJCOPY_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $OBJCOPY_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ OBJCOPY_FOR_TARGET='$(OBJDUMP)'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
+$as_echo "host tool" >&6; }
+ else
+ # We need a cross tool
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target objdump" >&5
$as_echo_n "checking where to find the target objdump... " >&6; }
if test "x${build}" != "x${host}" ; then