#include <74xx_7xx.h>
#include <asm/cache.h>
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
+
#ifdef CONFIG_AMIGAONEG3SE
#include "../board/MAI/AmigaOneG3SE/via686.h"
#include "../board/MAI/AmigaOneG3SE/memio.h"
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
cpu_t
get_cpu_type(void)
{
type = CPU_750FX;
break;
+ case 0x7002:
+ type = CPU_750GX;
+ break;
+
case 0x800C:
type = CPU_7410;
break;
type = CPU_7450;
break;
+ case 0x8001:
+ type = CPU_7455;
+ break;
+
+ case 0x8002:
+ type = CPU_7457;
+ break;
+
+ case 0x8003:
+ type = CPU_7447A;
+ break;
+
+ case 0x8004:
+ type = CPU_7448;
+ break;
+
default:
break;
}
#if !defined(CONFIG_BAB7xx)
int checkcpu (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
uint type = get_cpu_type();
uint pvr = get_pvr();
ulong clock = gd->cpu_clk;
str = "750FX";
break;
+ case CPU_750GX:
+ str = "750GX";
+ break;
+
case CPU_755:
str = "755";
break;
str = "MPC7410";
break;
+ case CPU_7447A:
+ str = "MPC7447A";
+ break;
+
+ case CPU_7448:
+ str = "MPC7448";
+ break;
+
case CPU_7450:
str = "MPC7450";
break;
+ case CPU_7455:
+ str = "MPC7455";
+ break;
+
+ case CPU_7457:
+ str = "MPC7457";
+ break;
+
default:
printf("Unknown CPU -- PVR: 0x%08x\n", pvr);
return -1;
#if !defined(CONFIG_PCIPPC2) && \
!defined(CONFIG_BAB7xx) && \
- !defined(CONFIG_ELPPC)
+ !defined(CONFIG_ELPPC) && \
+ !defined(CONFIG_PPMC7XX)
/* no generic way to do board reset. simply call soft_reset. */
void
do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- ulong addr;
+ ulong addr;
/* flush and disable I/D cache */
__asm__ __volatile__ ("mfspr 3, 1008" ::: "r3");
__asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5");
__asm__ __volatile__ ("isync");
__asm__ __volatile__ ("sync");
-#ifdef CFG_RESET_ADDRESS
- addr = CFG_RESET_ADDRESS;
+#ifdef CONFIG_SYS_RESET_ADDRESS
+ addr = CONFIG_SYS_RESET_ADDRESS;
#else
/*
- * note: when CFG_MONITOR_BASE points to a RAM address,
- * CFG_MONITOR_BASE - sizeof (ulong) is usually a valid
+ * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
+ * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
* address. Better pick an address known to be invalid on your
- * system and assign it to CFG_RESET_ADDRESS.
+ * system and assign it to CONFIG_SYS_RESET_ADDRESS.
*/
- addr = CFG_MONITOR_BASE - sizeof (ulong);
+ addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
#endif
soft_restart(addr);
while(1); /* not reached */
/*
* For the 7400 the TB clock runs at 1/4 the cpu bus speed.
*/
-#ifdef CONFIG_AMIGAONEG3SE
+#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SYS_CONFIG_BUS_CLK)
unsigned long get_tbclk(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
return (gd->bus_clk / 4);
}
-#else /* ! CONFIG_AMIGAONEG3SE */
+#else /* ! CONFIG_AMIGAONEG3SE and !CONFIG_SYS_CONFIG_BUS_CLK*/
unsigned long get_tbclk (void)
{
- return CFG_BUS_HZ / 4;
+ return CONFIG_SYS_BUS_HZ / 4;
}
-#endif /* CONFIG_AMIGAONEG3SE */
+#endif /* CONFIG_AMIGAONEG3SE or CONFIG_SYS_CONFIG_BUS_CLK*/
/* ------------------------------------------------------------------------- */
-
#if defined(CONFIG_WATCHDOG)
#if !defined(CONFIG_PCIPPC2) && !defined(CONFIG_BAB7xx)
void
#endif /* CONFIG_WATCHDOG */
/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_OF_LIBFDT
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", bd->bi_busfreq / 4, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "clock-frequency", bd->bi_intfreq, 1);
+
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+ fdt_fixup_ethernet(blob);
+}
+#endif
+/* ------------------------------------------------------------------------- */