+---
+title: Portable Services Introduction
+category: Concepts
+layout: default
+---
+
# Portable Services Introduction
This systemd version includes a preview of the "portable service"
is put together known concepts in a slightly nicer way to cover a specific set
of use-cases in a nicer way.
-# So, what *is* a "Portable Service"?
+## So, what *is* a "Portable Service"?
A portable service is ultimately just an OS tree, either inside of a directory
tree, or inside a raw disk image containing a Linux file system. This tree is
If you so will, "Portable Services" are a nicer way to manage chroot()
environments, with better security, tooling and behavior.
-# Where's the difference to a "Container"?
+## Where's the difference to a "Container"?
"Container" is a very vague term, after all it is used for
systemd-nspawn/LXC-type OS containers, for Docker/rkt-like micro service
user services. i.e. the functionality cannot be used for the stuff
bubblewrap/flatpak is focusing on.
-# Mode of Operation
+## Mode of Operation
If you have portable service image, maybe in a raw disk image called
`foobar_0.7.23.raw`, then attaching the services to the host is as easy as:
This command does the following:
-1. It dissects the image, checks and validates the `/etc/os-release` data of
- the image, and looks for all included unit files.
+1. It dissects the image, checks and validates the `/etc/os-release`
+ (or `/usr/lib/os-release`, see below) data of the image, and looks for
+ all included unit files.
2. It copies out all unit files with a suffix of `.service`, `.socket`,
`.target`, `.timer` and `.path`. whose name begins with the image's name
`foobar@.{service|socket|target|timer|path}` as well as
`foobar.*.{service|socket|target|timer|path}` and
`foobar.{service|socket|target|timer|path}` are copied out. These unit files
- are placed in `/etc/systemd/system/` like regular unit files. Within the
- images the unit files are looked for at the usual locations, i.e. in
- `/usr/lib/systemd/system/` and `/etc/systemd/system/` and so on, relative to
- the image's root.
+ are placed in `/etc/systemd/system.attached/` (which is part of the normal
+ unit file search path of PID 1, and thus loaded exactly like regular unit
+ files). Within the images the unit files are looked for at the usual
+ locations, i.e. in `/usr/lib/systemd/system/` and `/etc/systemd/system/` and
+ so on, relative to the image's root.
3. For each such unit file a drop-in file is created. Let's say
`foobar-waldo.service` was one of the unit files copied to
- `/etc/systemd/system/`, then a drop-in file
- `/etc/systemd/system/foobar-waldo.service.d/20-portable.conf` is created,
- containing a few lines of additional configuration:
+ `/etc/systemd/system.attached/`, then a drop-in file
+ `/etc/systemd/system.attached/foobar-waldo.service.d/20-portable.conf` is
+ created, containing a few lines of additional configuration:
```
[Service]
out. This still has to take place in a second, separate step. (That said We
might add options to do this automatically later on.).
-# Requirements on Images
+## Requirements on Images
Note that portable services don't introduce any new image format, but most OS
images should just work the way they are. Specifically, the following
requirements are made for an image that can be attached/detached with
`portablectl`.
-1. It must contain a binary (and its dependencies) that shall be invoked,
- including all its dependencies. If binary code, the code needs to be
- compiled for an architecture compatible with the host.
+1. It must contain an executable that shall be invoked, along with all its
+ dependencies. If binary code, the code needs to be compiled for an
+ architecture compatible with the host.
2. The image must either be a plain sub-directory (or btrfs subvolume)
containing the binaries and its dependencies in a classic Linux OS tree, or
an image with a partition table understood by the Linux kernel with only a
single partition defined, or alternatively, a GPT partition table with a set
of properly marked partitions following the [Discoverable Partitions
- Specification](https://www.freedesktop.org/wiki/Specifications/DiscoverablePartitionsSpec/).
+ Specification](https://systemd.io/DISCOVERABLE_PARTITIONS).
3. The image must at least contain one matching unit file, with the right name
prefix and suffix (see above). The unit file is searched in the usual paths,
image. (The implementation will check a couple of other paths too, but it's
recommended to use these two paths.)
-4. The image must contain an os-release file, either in /etc/os-release or
- /usr/lib/os-release. The file should follow the standard format.
+4. The image must contain an os-release file, either in `/etc/os-release` or
+ `/usr/lib/os-release`. The file should follow the standard format.
+
+5. The image must contain the files `/etc/resolv.conf` and `/etc/machine-id`
+ (empty files are ok), they will be bind mounted from the host at runtime.
+
+6. The image must contain directories `/proc/`, `/sys/`, `/dev/`, `/run/`,
+ `/tmp/`, `/var/tmp/` that can be mounted over with the corresponding version
+ from the host.
-Note that generally images created by tools such as `debootstrap`, `dnf
---installroot=` or `mkosi` qualify for all of the above in one way or
-another. If you wonder what the most minimal image would be that complies with
-the requirements above, it could consist of this:
+7. The OS might require other files or directories to be in place. For example,
+ if the image is built based on glibc, the dynamic loader needs to be
+ available in `/lib/ld-linux.so.2` or `/lib64/ld-linux-x86-64.so.2` (or
+ similar, depending on architecture), and if the distribution implements a
+ merged `/usr/` tree, this means `/lib` and/or `/lib64` need to be symlinks
+ to their respective counterparts below `/usr/`. For details see your
+ distribution's documentation.
+
+Note that images created by tools such as `debootstrap`, `dnf --installroot=`
+or `mkosi` generally qualify for all of the above in one way or another. If you
+wonder what the most minimal image would be that complies with the requirements
+above, it could consist of this:
```
-/usr/bin/minimald # a statically compiled binary
-/usr/lib/systemd/minimal-test.service # the unit file for the service, with ExecStart=/usr/bin/minimald
-/usr/lib/os-release # an os-release file explaining what this is
+/usr/bin/minimald # a statically compiled binary
+/usr/lib/systemd/system/minimal-test.service # the unit file for the service, with ExecStart=/usr/bin/minimald
+/usr/lib/os-release # an os-release file explaining what this is
+/etc/resolv.conf # empty file to mount over with host's version
+/etc/machine-id # ditto
+/proc/ # empty directory to use as mount point for host's API fs
+/sys/ # ditto
+/dev/ # ditto
+/run/ # ditto
+/tmp/ # ditto
+/var/tmp/ # ditto
```
And that's it.
but they generally don't have to, and it might make sense to avoid any, to keep
images minimal.
+If the image is writable, and some of the files or directories that are
+overmounted from the host do not exist yet they are automatically created. On
+read-only, immutable images (e.g. squashfs images) all files and directories to
+over-mount must exist already.
+
Note that as no new image format or metadata is defined, it's very
straight-forward to define images than can be made use of it a number of
different ways. For example, by using `mkosi -b` you can trivially build a
image. As mentioned `mkosi -b` takes care of all of that for you, but any other
image generator should work too.
-# Execution Environment
+## Execution Environment
Note that the code in portable service images is run exactly like regular
services. Hence there's no new execution environment to consider. Oh, unlike
Docker would do it, as these are regular system services they aren't run as PID
1 either, but with regular PID values.
-# Access to host resources
+## Access to host resources
If services shipped with this mechanism shall be able to access host resources
(such as files or AF_UNIX sockets for IPC), use the normal `BindPaths=` and
`/etc/resolv.conf`, the D-Bus system bus socket or write access to the logging
subsystem are available to the service.
-# Instantiation
+## Instantiation
Sometimes it makes sense to instantiate the same set of services multiple
times. The portable service concept does not introduce a new logic for this. It
The benefit of this approach is that templating works exactly the same for
units shipped with the OS itself as for attached portable services.
-# Immutable images with local data
+## Immutable images with local data
It's a good idea to keep portable service images read-only during normal
operation. In fact all but the `trusted` profile will default to this kind of