Merge tag 'video-for-2019.07-rc1' of git://git.denx.de/u-boot-video

[thirdparty/u-boot.git] / drivers / Makefile

diff --git a/drivers/Makefile b/drivers/Makefile
index 55de10926ef423452f12a9c75a41a3a657e0df29..a7bba3ed564b0dfc4035be3254a81abd1612a9f0 100644 (file)
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -2,6 +2,7 @@
 
 obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
 obj-$(CONFIG_$(SPL_TPL_)DM) += core/
+obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/
 obj-$(CONFIG_$(SPL_TPL_)GPIO_SUPPORT) += gpio/
 obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
 obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
@@ -10,7 +11,7 @@ obj-$(CONFIG_$(SPL_TPL_)LED) += led/
 obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
 obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/raw/
 obj-$(CONFIG_$(SPL_TPL_)PCH_SUPPORT) += pch/
-obj-$(CONFIG_$(SPL_TPL_)PCI_SUPPORT) += pci/
+obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
 obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
 obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
 obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
@@ -34,6 +35,7 @@ obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
 obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
 obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
 obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
+obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
 obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/
@@ -46,15 +48,14 @@ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
 obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
 obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
-obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/
-obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/
-obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
+obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/
+obj-$(CONFIG_SPL_USB_GADGET) += usb/common/
+obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/
 obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
 obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
-obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
-obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
+obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
 obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
 obj-$(CONFIG_SPL_THERMAL) += thermal/
 
@@ -86,7 +87,7 @@ obj-$(CONFIG_MMC) += mmc/
 obj-$(CONFIG_NVME) += nvme/
 obj-y += pcmcia/
 obj-y += dfu/
-obj-$(CONFIG_X86) += pch/
+obj-$(CONFIG_PCH) += pch/
 obj-y += phy/allwinner/
 obj-y += phy/marvell/
 obj-y += rtc/
@@ -113,4 +114,5 @@ obj-$(CONFIG_W1) += w1/
 obj-$(CONFIG_W1_EEPROM) += w1-eeprom/
 
 obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
+obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/
 endif