static int is_ready;
-static inline u32 ahci_port_base(u32 base, u32 port)
+static inline void __iomem *ahci_port_base(void __iomem *base, u32 port)
{
return base + 0x100 + (port * 0x80);
}
for (i = 0; i < probe_ent->n_ports; i++) {
probe_ent->port[i].port_mmio =
- ahci_port_base((u32)host_mmio, i);
+ ahci_port_base(host_mmio, i);
port_mmio =
(struct sata_port_regs *)probe_ent->port[i].port_mmio;
| ATA_FLAG_PIO_DMA
| ATA_FLAG_NO_ATAPI;
- probe_ent->mmio_base = CONFIG_DWC_AHSATA_BASE_ADDR;
+ probe_ent->mmio_base = (void __iomem *)CONFIG_DWC_AHSATA_BASE_ADDR;
/* initialize adapter */
rc = ahci_host_init(probe_ent);
memset(cmd_hdr, 0, AHCI_CMD_SLOT_SZ);
cmd_hdr->opts = cpu_to_le32(opts);
cmd_hdr->status = 0;
- cmd_hdr->tbl_addr = cpu_to_le32(pp->cmd_tbl & 0xffffffff);
- cmd_hdr->tbl_addr_hi = 0;
+ pp->cmd_slot->tbl_addr = cpu_to_le32((u32)pp->cmd_tbl & 0xffffffff);
+#ifdef CONFIG_PHYS_64BIT
+ pp->cmd_slot->tbl_addr_hi =
+ cpu_to_le32((u32)(((pp->cmd_tbl) >> 16) >> 16));
+#endif
}
#define AHCI_GET_CMD_SLOT(c) ((c) ? ffs(c) : 0)
* and its scatter-gather table
*/
pp->cmd_tbl = mem;
- debug("cmd_tbl_dma = 0x%x\n", pp->cmd_tbl);
+ debug("cmd_tbl_dma = 0x%lx\n", pp->cmd_tbl);
mem += AHCI_CMD_TBL_HDR;
return 0;
}
+int reset_sata(int dev)
+{
+ struct ahci_probe_ent *probe_ent;
+ struct sata_host_regs *host_mmio;
+
+ if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
+ printf("The sata index %d is out of ranges\n\r", dev);
+ return -1;
+ }
+
+ probe_ent = (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ if (NULL == probe_ent)
+ /* not initialized, so nothing to reset */
+ return 0;
+
+ host_mmio = (struct sata_host_regs *)probe_ent->mmio_base;
+ setbits_le32(&host_mmio->ghc, SATA_HOST_GHC_HR);
+ while (readl(&host_mmio->ghc) & SATA_HOST_GHC_HR)
+ udelay(100);
+
+ return 0;
+}
+
static void dwc_ahsata_print_info(int dev)
{
- block_dev_desc_t *pdev = &(sata_dev_desc[dev]);
+ struct blk_desc *pdev = &(sata_dev_desc[dev]);
printf("SATA Device Info:\n\r");
#ifdef CONFIG_SYS_64BIT_LBA
return blkcnt;
}
+int sata_port_status(int dev, int port)
+{
+ struct sata_port_regs *port_mmio;
+ struct ahci_probe_ent *probe_ent = NULL;
+
+ if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1))
+ return -EINVAL;
+
+ if (sata_dev_desc[dev].priv == NULL)
+ return -ENODEV;
+
+ probe_ent = (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ port_mmio = (struct sata_port_regs *)probe_ent->port[port].port_mmio;
+
+ return readl(&(port_mmio->ssts)) & SATA_PORT_SSTS_DET_MASK;
+}
+
/*
* SATA interface between low level driver and command layer
*/
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
u8 port = probe_ent->hard_port_no;
- block_dev_desc_t *pdev = &(sata_dev_desc[dev]);
+ struct blk_desc *pdev = &(sata_dev_desc[dev]);
id = (u16 *)memalign(ARCH_DMA_MINALIGN,
roundup(ARCH_DMA_MINALIGN,