DECLARE_GLOBAL_DATA_PTR;
-#define I2C_TIMEOUT 1000
+#define I2C_STAT_TIMEO (1 << 31)
+#define I2C_TIMEOUT 10
-static void wait_for_bb (void);
-static u16 wait_for_pin (void);
+static u32 wait_for_bb(void);
+static u32 wait_for_status_mask(u16 mask);
static void flush_fifo(void);
-static struct i2c *i2c_base = (struct i2c *)I2C_DEFAULT_BASE;
-
-static unsigned int bus_initialized[I2C_BUS_MAX];
-static unsigned int current_bus;
+/*
+ * For SPL boot some boards need i2c before SDRAM is initialised so force
+ * variables to live in SRAM
+ */
+static struct i2c __attribute__((section (".data"))) *i2c_base =
+ (struct i2c *)I2C_DEFAULT_BASE;
+static unsigned int __attribute__((section (".data"))) bus_initialized[I2C_BUS_MAX] =
+ { [0 ... (I2C_BUS_MAX-1)] = 0 };
+static unsigned int __attribute__((section (".data"))) current_bus = 0;
-void i2c_init (int speed, int slaveadd)
+void i2c_init(int speed, int slaveadd)
{
int psc, fsscll, fssclh;
int hsscll = 0, hssclh = 0;
u32 scll, sclh;
- int timeout = I2C_TIMEOUT;
/* Only handle standard, fast and high speeds */
if ((speed != OMAP_I2C_STANDARD) &&
fssclh -= I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM;
if (((fsscll < 0) || (fssclh < 0)) ||
((fsscll > 255) || (fssclh > 255))) {
- printf("Error : I2C initializing first phase clock\n");
+ puts("Error : I2C initializing first phase clock\n");
return;
}
hssclh -= I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM;
if (((fsscll < 0) || (fssclh < 0)) ||
((fsscll > 255) || (fssclh > 255))) {
- printf("Error : I2C initializing second phase clock\n");
+ puts("Error : I2C initializing second phase clock\n");
return;
}
fssclh -= I2C_FASTSPEED_SCLH_TRIM;
if (((fsscll < 0) || (fssclh < 0)) ||
((fsscll > 255) || (fssclh > 255))) {
- printf("Error : I2C initializing clock\n");
+ puts("Error : I2C initializing clock\n");
return;
}
sclh = (unsigned int)fssclh;
}
- if (readw (&i2c_base->con) & I2C_CON_EN) {
- writew (0, &i2c_base->con);
- udelay (50000);
- }
-
- writew(0x2, &i2c_base->sysc); /* for ES2 after soft reset */
- udelay(1000);
+ if (gd->flags & GD_FLG_RELOC)
+ bus_initialized[current_bus] = 1;
- writew(I2C_CON_EN, &i2c_base->con);
- while (!(readw(&i2c_base->syss) & I2C_SYSS_RDONE) && timeout--) {
- if (timeout <= 0) {
- printf("ERROR: Timeout in soft-reset\n");
- return;
- }
- udelay(1000);
+ if (readw(&i2c_base->con) & I2C_CON_EN) {
+ writew(0, &i2c_base->con);
+ udelay(50000);
}
- writew(0, &i2c_base->con);
writew(psc, &i2c_base->psc);
writew(scll, &i2c_base->scll);
writew(sclh, &i2c_base->sclh);
/* own address */
- writew (slaveadd, &i2c_base->oa);
- writew (I2C_CON_EN, &i2c_base->con);
+ writew(slaveadd, &i2c_base->oa);
+ writew(I2C_CON_EN, &i2c_base->con);
/* have to enable intrrupts or OMAP i2c module doesn't work */
- writew (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
+ writew(I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
- udelay (1000);
+ udelay(1000);
flush_fifo();
- writew (0xFFFF, &i2c_base->stat);
- writew (0, &i2c_base->cnt);
-
- if (gd->flags & GD_FLG_RELOC)
- bus_initialized[current_bus] = 1;
+ writew(0xFFFF, &i2c_base->stat);
+ writew(0, &i2c_base->cnt);
}
-static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
-{
- int i2c_error = 0;
- u16 status;
-
- /* wait until bus not busy */
- wait_for_bb ();
-
- /* one byte only */
- writew (1, &i2c_base->cnt);
- /* set slave address */
- writew (devaddr, &i2c_base->sa);
- /* no stop bit needed here */
- writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, &i2c_base->con);
-
- /* send register offset */
- while (1) {
- status = wait_for_pin();
- if (status == 0 || status & I2C_STAT_NACK) {
- i2c_error = 1;
- goto read_exit;
- }
- if (status & I2C_STAT_XRDY) {
- /* Important: have to use byte access */
- writeb(regoffset, &i2c_base->data);
- writew(I2C_STAT_XRDY, &i2c_base->stat);
- }
- if (status & I2C_STAT_ARDY) {
- writew(I2C_STAT_ARDY, &i2c_base->stat);
- break;
- }
- }
-
- /* set slave address */
- writew(devaddr, &i2c_base->sa);
- /* read one byte from slave */
- writew(1, &i2c_base->cnt);
- /* need stop bit here */
- writew(I2C_CON_EN | I2C_CON_MST |
- I2C_CON_STT | I2C_CON_STP,
- &i2c_base->con);
+static void flush_fifo(void)
+{ u16 stat;
- /* receive data */
+ /* note: if you try and read data when its not there or ready
+ * you get a bus error
+ */
while (1) {
- status = wait_for_pin();
- if (status == 0 || status & I2C_STAT_NACK) {
- i2c_error = 1;
- goto read_exit;
- }
- if (status & I2C_STAT_RRDY) {
+ stat = readw(&i2c_base->stat);
+ if (stat == I2C_STAT_RRDY) {
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX)
- *value = readb(&i2c_base->data);
+ defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX)
+ readb(&i2c_base->data);
#else
- *value = readw(&i2c_base->data);
+ readw(&i2c_base->data);
#endif
writew(I2C_STAT_RRDY, &i2c_base->stat);
- }
- if (status & I2C_STAT_ARDY) {
- writew(I2C_STAT_ARDY, &i2c_base->stat);
+ udelay(1000);
+ } else
break;
- }
}
+}
+
+int i2c_probe(uchar chip)
+{
+ u32 status;
+ int res = 1; /* default = fail */
+
+ if (chip == readw(&i2c_base->oa))
+ return res;
+
+ /* wait until bus not busy */
+ status = wait_for_bb();
+ /* exit on BUS busy */
+ if (status & I2C_STAT_TIMEO)
+ return res;
-read_exit:
+ /* try to write one byte */
+ writew(1, &i2c_base->cnt);
+ /* set slave address */
+ writew(chip, &i2c_base->sa);
+ /* stop bit needed here */
+ writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT
+ | I2C_CON_STP, &i2c_base->con);
+ /* enough delay for the NACK bit set */
+ udelay(9000);
+
+ if (!(readw(&i2c_base->stat) & I2C_STAT_NACK)) {
+ res = 0; /* success case */
+ flush_fifo();
+ writew(0xFFFF, &i2c_base->stat);
+ } else {
+ /* failure, clear sources*/
+ writew(0xFFFF, &i2c_base->stat);
+ /* finish up xfer */
+ writew(readw(&i2c_base->con) | I2C_CON_STP, &i2c_base->con);
+ status = wait_for_bb();
+ /* exit on BUS busy */
+ if (status & I2C_STAT_TIMEO)
+ return res;
+ }
flush_fifo();
- writew (0xFFFF, &i2c_base->stat);
- writew (0, &i2c_base->cnt);
- return i2c_error;
+ /* don't allow any more data in... we don't want it. */
+ writew(0, &i2c_base->cnt);
+ writew(0xFFFF, &i2c_base->stat);
+ return res;
}
-static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value)
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
- int i2c_error = 0;
- u16 status;
+ int i2c_error = 0, i;
+ u32 status;
+
+ if ((alen > 2) || (alen < 0))
+ return 1;
+
+ if (alen < 2) {
+ if (addr + len > 256)
+ return 1;
+ } else if (addr + len > 0xFFFF) {
+ return 1;
+ }
/* wait until bus not busy */
- wait_for_bb ();
+ status = wait_for_bb();
- /* two bytes */
- writew (2, &i2c_base->cnt);
+ /* exit on BUS busy */
+ if (status & I2C_STAT_TIMEO)
+ return 1;
+
+ writew((alen & 0xFF), &i2c_base->cnt);
/* set slave address */
- writew (devaddr, &i2c_base->sa);
- /* stop bit needed here */
- writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
- I2C_CON_STP, &i2c_base->con);
+ writew(chip, &i2c_base->sa);
+ /* Clear the Tx & Rx FIFOs */
+ writew((readw(&i2c_base->buf) | I2C_RXFIFO_CLEAR |
+ I2C_TXFIFO_CLEAR), &i2c_base->buf);
+ /* no stop bit needed here */
+ writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_TRX |
+ I2C_CON_STT, &i2c_base->con);
- while (1) {
- status = wait_for_pin();
- if (status == 0 || status & I2C_STAT_NACK) {
- i2c_error = 1;
- goto write_exit;
- }
+ /* wait for Transmit ready condition */
+ status = wait_for_status_mask(I2C_STAT_XRDY | I2C_STAT_NACK);
+
+ if (status & (I2C_STAT_NACK | I2C_STAT_TIMEO))
+ i2c_error = 1;
+
+ if (!i2c_error) {
if (status & I2C_STAT_XRDY) {
+ switch (alen) {
+ case 2:
+ /* Send address MSByte */
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX)
- /* send register offset */
- writeb(regoffset, &i2c_base->data);
- writew(I2C_STAT_XRDY, &i2c_base->stat);
-
- while (1) {
- status = wait_for_pin();
- if (status == 0 || status & I2C_STAT_NACK) {
+ defined(CONFIG_AM33XX)
+ writew(((addr >> 8) & 0xFF), &i2c_base->data);
+
+ /* Clearing XRDY event */
+ writew((status & I2C_STAT_XRDY),
+ &i2c_base->stat);
+ /* wait for Transmit ready condition */
+ status = wait_for_status_mask(I2C_STAT_XRDY |
+ I2C_STAT_NACK);
+
+ if (status & (I2C_STAT_NACK |
+ I2C_STAT_TIMEO)) {
i2c_error = 1;
- goto write_exit;
- }
- if (status & I2C_STAT_XRDY) {
- /* send data */
- writeb(value, &i2c_base->data);
- writew(I2C_STAT_XRDY, &i2c_base->stat);
+ break;
}
- if (status & I2C_STAT_ARDY) {
- writew(I2C_STAT_ARDY, &i2c_base->stat);
+#endif
+ case 1:
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+ defined(CONFIG_AM33XX)
+ /* Send address LSByte */
+ writew((addr & 0xFF), &i2c_base->data);
+#else
+ /* Send address Short word */
+ writew((addr & 0xFFFF), &i2c_base->data);
+#endif
+ /* Clearing XRDY event */
+ writew((status & I2C_STAT_XRDY),
+ &i2c_base->stat);
+ /*wait for Transmit ready condition */
+ status = wait_for_status_mask(I2C_STAT_ARDY |
+ I2C_STAT_NACK);
+
+ if (status & (I2C_STAT_NACK |
+ I2C_STAT_TIMEO)) {
+ i2c_error = 1;
break;
}
}
- break;
+ } else
+ i2c_error = 1;
+ }
+
+ /* Wait for ARDY to set */
+ status = wait_for_status_mask(I2C_STAT_ARDY | I2C_STAT_NACK
+ | I2C_STAT_AL);
+
+ if (!i2c_error) {
+ /* set slave address */
+ writew(chip, &i2c_base->sa);
+ writew((len & 0xFF), &i2c_base->cnt);
+ /* Clear the Tx & Rx FIFOs */
+ writew((readw(&i2c_base->buf) | I2C_RXFIFO_CLEAR |
+ I2C_TXFIFO_CLEAR), &i2c_base->buf);
+ /* need stop bit here */
+ writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP,
+ &i2c_base->con);
+
+ for (i = 0; i < len; i++) {
+ /* wait for Receive condition */
+ status = wait_for_status_mask(I2C_STAT_RRDY |
+ I2C_STAT_NACK);
+ if (status & (I2C_STAT_NACK | I2C_STAT_TIMEO)) {
+ i2c_error = 1;
+ break;
+ }
+
+ if (status & I2C_STAT_RRDY) {
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+ defined(CONFIG_AM33XX)
+ buffer[i] = readb(&i2c_base->data);
#else
- /* send out two bytes */
- writew((value << 8) + regoffset, &i2c_base->data);
- writew(I2C_STAT_XRDY, &i2c_base->stat);
+ *((u16 *)&buffer[i]) =
+ readw(&i2c_base->data) & 0xFFFF;
+ i++;
#endif
- }
- if (status & I2C_STAT_ARDY) {
- writew(I2C_STAT_ARDY, &i2c_base->stat);
- break;
+ writew((status & I2C_STAT_RRDY),
+ &i2c_base->stat);
+ udelay(1000);
+ } else {
+ i2c_error = 1;
+ }
}
}
- wait_for_bb();
-
- status = readw(&i2c_base->stat);
- if (status & I2C_STAT_NACK)
- i2c_error = 1;
+ /* Wait for ARDY to set */
+ status = wait_for_status_mask(I2C_STAT_ARDY | I2C_STAT_NACK
+ | I2C_STAT_AL);
-write_exit:
- flush_fifo();
- writew (0xFFFF, &i2c_base->stat);
- writew (0, &i2c_base->cnt);
- return i2c_error;
-}
+ if (i2c_error) {
+ writew(0, &i2c_base->con);
+ return 1;
+ }
-static void flush_fifo(void)
-{ u16 stat;
+ writew(I2C_CON_EN, &i2c_base->con);
- /* note: if you try and read data when its not there or ready
- * you get a bus error
- */
- while(1){
- stat = readw(&i2c_base->stat);
- if(stat == I2C_STAT_RRDY){
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX)
- readb(&i2c_base->data);
-#else
- readw(&i2c_base->data);
-#endif
- writew(I2C_STAT_RRDY,&i2c_base->stat);
- udelay(1000);
- }else
- break;
+ while (readw(&i2c_base->stat)
+ || (readw(&i2c_base->con) & I2C_CON_MST)) {
+ udelay(10000);
+ writew(0xFFFF, &i2c_base->stat);
}
+
+ writew(I2C_CON_EN, &i2c_base->con);
+ flush_fifo();
+ writew(0xFFFF, &i2c_base->stat);
+ writew(0, &i2c_base->cnt);
+
+ return 0;
}
-int i2c_probe (uchar chip)
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
- u16 status;
- int res = 1; /* default = fail */
- if (chip == readw (&i2c_base->oa)) {
- return res;
+ int i, i2c_error = 0;
+ u32 status;
+ u16 writelen;
+
+ if (alen > 2)
+ return 1;
+
+ if (alen < 2) {
+ if (addr + len > 256)
+ return 1;
+ } else if (addr + len > 0xFFFF) {
+ return 1;
}
/* wait until bus not busy */
- wait_for_bb ();
+ status = wait_for_bb();
- /* try to write one byte */
- writew (1, &i2c_base->cnt);
+ /* exiting on BUS busy */
+ if (status & I2C_STAT_TIMEO)
+ return 1;
+
+ writelen = (len & 0xFFFF) + alen;
+
+ /* two bytes */
+ writew((writelen & 0xFFFF), &i2c_base->cnt);
+ /* Clear the Tx & Rx FIFOs */
+ writew((readw(&i2c_base->buf) | I2C_RXFIFO_CLEAR |
+ I2C_TXFIFO_CLEAR), &i2c_base->buf);
/* set slave address */
- writew (chip, &i2c_base->sa);
+ writew(chip, &i2c_base->sa);
/* stop bit needed here */
writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
- I2C_CON_STP, &i2c_base->con);
+ I2C_CON_STP, &i2c_base->con);
- status = wait_for_pin();
+ /* wait for Transmit ready condition */
+ status = wait_for_status_mask(I2C_STAT_XRDY | I2C_STAT_NACK);
- /* check for ACK (!NAK) */
- if (!(status & I2C_STAT_NACK))
- res = 0;
+ if (status & (I2C_STAT_NACK | I2C_STAT_TIMEO))
+ i2c_error = 1;
- /* abort transfer (force idle state) */
- writew(0, &i2c_base->con);
+ if (!i2c_error) {
+ if (status & I2C_STAT_XRDY) {
+ switch (alen) {
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+ defined(CONFIG_AM33XX)
+ case 2:
+ /* send out MSB byte */
+ writeb(((addr >> 8) & 0xFF), &i2c_base->data);
+#else
+ writeb((addr & 0xFFFF), &i2c_base->data);
+ break;
+#endif
+ /* Clearing XRDY event */
+ writew((status & I2C_STAT_XRDY),
+ &i2c_base->stat);
+ /*waiting for Transmit ready * condition */
+ status = wait_for_status_mask(I2C_STAT_XRDY |
+ I2C_STAT_NACK);
+
+ if (status & (I2C_STAT_NACK | I2C_STAT_TIMEO)) {
+ i2c_error = 1;
+ break;
+ }
+ case 1:
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+ defined(CONFIG_AM33XX)
+ /* send out MSB byte */
+ writeb((addr & 0xFF), &i2c_base->data);
+#else
+ writew(((buffer[0] << 8) | (addr & 0xFF)),
+ &i2c_base->data);
+#endif
+ }
- flush_fifo();
- writew (0, &i2c_base->cnt); /* don't allow any more data in...we don't want it.*/
- writew(0xFFFF, &i2c_base->stat);
- return res;
-}
+ /* Clearing XRDY event */
+ writew((status & I2C_STAT_XRDY), &i2c_base->stat);
+ }
-int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
- int i;
+ /* waiting for Transmit ready condition */
+ status = wait_for_status_mask(I2C_STAT_XRDY | I2C_STAT_NACK);
- if (alen > 1) {
- printf ("I2C read: addr len %d not supported\n", alen);
- return 1;
- }
-
- if (addr + len > 256) {
- printf ("I2C read: address out of range\n");
- return 1;
- }
+ if (status & (I2C_STAT_NACK | I2C_STAT_TIMEO))
+ i2c_error = 1;
- for (i = 0; i < len; i++) {
- if (i2c_read_byte (chip, addr + i, &buffer[i])) {
- printf ("I2C read: I/O error\n");
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- return 1;
+ if (!i2c_error) {
+ for (i = ((alen > 1) ? 0 : 1); i < len; i++) {
+ if (status & I2C_STAT_XRDY) {
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+ defined(CONFIG_AM33XX)
+ writeb((buffer[i] & 0xFF),
+ &i2c_base->data);
+#else
+ writew((((buffer[i] << 8) |
+ buffer[i + 1]) & 0xFFFF),
+ &i2c_base->data);
+ i++;
+#endif
+ } else
+ i2c_error = 1;
+ /* Clearing XRDY event */
+ writew((status & I2C_STAT_XRDY),
+ &i2c_base->stat);
+ /* waiting for XRDY condition */
+ status = wait_for_status_mask(
+ I2C_STAT_XRDY |
+ I2C_STAT_ARDY |
+ I2C_STAT_NACK);
+ if (status & (I2C_STAT_NACK |
+ I2C_STAT_TIMEO)) {
+ i2c_error = 1;
+ break;
+ }
+ if (status & I2C_STAT_ARDY)
+ break;
+ }
}
}
- return 0;
-}
+ status = wait_for_status_mask(I2C_STAT_ARDY | I2C_STAT_NACK |
+ I2C_STAT_AL);
-int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
- int i;
+ if (status & (I2C_STAT_NACK | I2C_STAT_TIMEO))
+ i2c_error = 1;
- if (alen > 1) {
- printf ("I2C read: addr len %d not supported\n", alen);
+ if (i2c_error) {
+ writew(0, &i2c_base->con);
return 1;
}
- if (addr + len > 256) {
- printf ("I2C read: address out of range\n");
- return 1;
- }
+ if (!i2c_error) {
+ int eout = 200;
- for (i = 0; i < len; i++) {
- if (i2c_write_byte (chip, addr + i, buffer[i])) {
- printf ("I2C read: I/O error\n");
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- return 1;
+ writew(I2C_CON_EN, &i2c_base->con);
+ while ((status = readw(&i2c_base->stat)) ||
+ (readw(&i2c_base->con) & I2C_CON_MST)) {
+ udelay(1000);
+ /* have to read to clear intrrupt */
+ writew(0xFFFF, &i2c_base->stat);
+ if (--eout == 0)
+ /* better leave with error than hang */
+ break;
}
}
+ flush_fifo();
+ writew(0xFFFF, &i2c_base->stat);
+ writew(0, &i2c_base->cnt);
return 0;
}
-static void wait_for_bb (void)
+static u32 wait_for_bb(void)
{
int timeout = I2C_TIMEOUT;
- u16 stat;
+ u32 stat;
- writew(0xFFFF, &i2c_base->stat); /* clear current interruts...*/
- while ((stat = readw (&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
- writew (stat, &i2c_base->stat);
+ while ((stat = readw(&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
+ writew(stat, &i2c_base->stat);
udelay(1000);
}
if (timeout <= 0) {
- printf ("timed out in wait_for_bb: I2C_STAT=%x\n",
- readw (&i2c_base->stat));
+ printf("timed out in wait_for_bb: I2C_STAT=%x\n",
+ readw(&i2c_base->stat));
+ stat |= I2C_STAT_TIMEO;
}
writew(0xFFFF, &i2c_base->stat); /* clear delayed stuff*/
+ return stat;
}
-static u16 wait_for_pin (void)
+static u32 wait_for_status_mask(u16 mask)
{
- u16 status;
+ u32 status;
int timeout = I2C_TIMEOUT;
do {
- udelay (1000);
- status = readw (&i2c_base->stat);
- } while ( !(status &
- (I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
- I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
- I2C_STAT_AL)) && timeout--);
+ udelay(1000);
+ status = readw(&i2c_base->stat);
+ } while (!(status & mask) && timeout--);
if (timeout <= 0) {
- printf ("timed out in wait_for_pin: I2C_STAT=%x\n",
- readw (&i2c_base->stat));
+ printf("timed out in wait_for_status_mask: I2C_STAT=%x\n",
+ readw(&i2c_base->stat));
writew(0xFFFF, &i2c_base->stat);
- status = 0;
+ status |= I2C_STAT_TIMEO;
}
-
return status;
}
return -1;
}
-#if I2C_BUS_MAX==3
+#if I2C_BUS_MAX == 3
if (bus == 2)
i2c_base = (struct i2c *)I2C_BASE3;
else
current_bus = bus;
- if(!bus_initialized[current_bus])
+ if (!bus_initialized[current_bus])
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return 0;
projects / people / ms / u-boot.git / blobdiff