* Copyright (c) 2010-2011 NVIDIA Corporation
* NVIDIA Corporation <www.nvidia.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <fdtdec.h>
#include <i2c.h>
#include <asm/io.h>
-#include <asm/arch/clk_rst.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
-#include <asm/arch/tegra_i2c.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/tegra_i2c.h>
DECLARE_GLOBAL_DATA_PTR;
struct i2c_control *control;
struct i2c_ctlr *regs;
int is_dvc; /* DVC type, rather than I2C */
+ int is_scs; /* single clock source (T114+) */
int inited; /* bus is inited */
};
* 16 to get the right frequency.
*/
clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
- i2c_bus->speed * 2 * 8);
+ i2c_bus->speed * 2 * 8);
+
+ if (i2c_bus->is_scs) {
+ /*
+ * T114 I2C went to a single clock source for standard/fast and
+ * HS clock speeds. The new clock rate setting calculation is:
+ * SCL = CLK_SOURCE.I2C /
+ * (CLK_MULT_STD_FAST_MODE * (I2C_CLK_DIV_STD_FAST_MODE+1) *
+ * I2C FREQUENCY DIVISOR) as per the T114 TRM (sec 30.3.1).
+ *
+ * NOTE: We do this here, after the initial clock/pll start,
+ * because if we read the clk_div reg before the controller
+ * is running, we hang, and we need it for the new calc.
+ */
+ int clk_div_stdfst_mode = readl(&i2c_bus->regs->clk_div) >> 16;
+ debug("%s: CLK_DIV_STD_FAST_MODE setting = %d\n", __func__,
+ clk_div_stdfst_mode);
+
+ clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
+ CLK_MULT_STD_FAST_MODE * (clk_div_stdfst_mode + 1) *
+ i2c_bus->speed * 2);
+ }
/* Reset I2C controller. */
i2c_reset_controller(i2c_bus);
return error;
}
-static int tegra2_i2c_write_data(u32 addr, u8 *data, u32 len)
+static int tegra_i2c_write_data(u32 addr, u8 *data, u32 len)
{
int error;
struct i2c_trans_info trans_info;
error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info);
if (error)
- debug("tegra2_i2c_write_data: Error (%d) !!!\n", error);
+ debug("tegra_i2c_write_data: Error (%d) !!!\n", error);
return error;
}
-static int tegra2_i2c_read_data(u32 addr, u8 *data, u32 len)
+static int tegra_i2c_read_data(u32 addr, u8 *data, u32 len)
{
int error;
struct i2c_trans_info trans_info;
error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info);
if (error)
- debug("tegra2_i2c_read_data: Error (%d) !!!\n", error);
+ debug("tegra_i2c_read_data: Error (%d) !!!\n", error);
return error;
}
* @param node_list list of nodes to process (any <=0 are ignored)
* @param count number of nodes to process
* @param is_dvc 1 if these are DVC ports, 0 if standard I2C
+ * @param is_scs 1 if this HW uses a single clock source (T114+)
* @return 0 if ok, -1 on error
*/
static int process_nodes(const void *blob, int node_list[], int count,
- int is_dvc)
+ int is_dvc, int is_scs)
{
struct i2c_bus *i2c_bus;
int i;
return -1;
}
+ i2c_bus->is_scs = is_scs;
+
i2c_bus->is_dvc = is_dvc;
if (is_dvc) {
i2c_bus->control =
const void *blob = gd->fdt_blob;
int count;
- /* First get the normal i2c ports */
+ /* First check for newer (T114+) I2C ports */
+ count = fdtdec_find_aliases_for_id(blob, "i2c",
+ COMPAT_NVIDIA_TEGRA114_I2C, node_list,
+ TEGRA_I2C_NUM_CONTROLLERS);
+ if (process_nodes(blob, node_list, count, 0, 1))
+ return;
+
+ /* Now get the older (T20/T30) normal I2C ports */
count = fdtdec_find_aliases_for_id(blob, "i2c",
COMPAT_NVIDIA_TEGRA20_I2C, node_list,
TEGRA_I2C_NUM_CONTROLLERS);
- if (process_nodes(blob, node_list, count, 0))
+ if (process_nodes(blob, node_list, count, 0, 0))
return;
/* Now look for dvc ports */
count = fdtdec_add_aliases_for_id(blob, "i2c",
COMPAT_NVIDIA_TEGRA20_DVC, node_list,
TEGRA_I2C_NUM_CONTROLLERS);
- if (process_nodes(blob, node_list, count, 1))
+ if (process_nodes(blob, node_list, count, 1, 0))
return;
}
debug("\n");
/* Shift 7-bit address over for lower-level i2c functions */
- rc = tegra2_i2c_write_data(chip << 1, buffer, len);
+ rc = tegra_i2c_write_data(chip << 1, buffer, len);
if (rc)
debug("i2c_write_data(): rc=%d\n", rc);
debug("inside i2c_read_data():\n");
/* Shift 7-bit address over for lower-level i2c functions */
- rc = tegra2_i2c_read_data(chip << 1, buffer, len);
+ rc = tegra_i2c_read_data(chip << 1, buffer, len);
if (rc) {
debug("i2c_read_data(): rc=%d\n", rc);
return rc;
return 0;
}
#endif
+
+int tegra_i2c_get_dvc_bus_num(void)
+{
+ int i;
+
+ for (i = 0; i < CONFIG_SYS_MAX_I2C_BUS; i++) {
+ struct i2c_bus *bus = &i2c_controllers[i];
+
+ if (bus->inited && bus->is_dvc)
+ return i;
+ }
+
+ return -1;
+}
projects / people / ms / u-boot.git / blobdiff