menu "MMC Host controller Support"
+config MMC
+ bool "MMC/SD/SDIO card support"
+ default ARM || PPC || SANDBOX
+ help
+ This selects MultiMediaCard, Secure Digital and Secure
+ Digital I/O support.
+
+ If you want MMC/SD/SDIO support, you should say Y here and
+ also to your specific host controller driver.
+
+config GENERIC_MMC
+ bool "Generic MMC driver framework"
+ default MMC
+
config DM_MMC
bool "Enable MMC controllers using Driver Model"
depends on DM
help
- This enables the MultiMediaCard (MMC) uclass which suports MMC and
+ This enables the MultiMediaCard (MMC) uclass which supports MMC and
Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
and non-removable (e.g. eMMC chip) devices are supported. These
appear as block devices in U-Boot and can support filesystems such
as EXT4 and FAT.
+config DM_MMC_OPS
+ bool "Support MMC controller operations using Driver Model"
+ depends on DM_MMC
+ default y if DM_MMC
+ help
+ Driver model provides a means of supporting device operations. This
+ option moves MMC operations under the control of driver model. The
+ option will be removed as soon as all DM_MMC drivers use it, as it
+ will the only supported behaviour.
+
+if MMC
+
+config SPL_MMC_TINY
+ bool "Tiny MMC framework in SPL"
+ help
+ Enable MMC framework tinification support. This option is useful if
+ if your SPL is extremely size constrained. Heed the warning, enable
+ this option if and only if you know exactly what you are doing, if
+ you are reading this help text, you most likely have no idea :-)
+
+ The MMC framework is reduced to bare minimum to be useful. No malloc
+ support is needed for the MMC framework operation with this option
+ enabled. The framework supports exactly one MMC device and exactly
+ one MMC driver. The MMC driver can be adjusted to avoid any malloc
+ operations too, which can remove the need for malloc support in SPL
+ and thus further reduce footprint.
+
+config MMC_DAVINCI
+ bool "TI DAVINCI Multimedia Card Interface support"
+ depends on ARCH_DAVINCI
+ default y
+ help
+ This selects the TI DAVINCI Multimedia card Interface.
+ If you have an DAVINCI board with a Multimedia Card slot,
+ say Y here. If unsure, say N.
+
+config MMC_DW
+ bool "Synopsys DesignWare Memory Card Interface"
+ help
+ This selects support for the Synopsys DesignWare Mobile Storage IP
+ block, this provides host support for SD and MMC interfaces, in both
+ PIO, internal DMA mode and external DMA mode.
+
+config MMC_DW_EXYNOS
+ bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
+ depends on ARCH_EXYNOS
+ depends on MMC_DW
+ default y
+ help
+ This selects support for Samsung Exynos SoC specific extensions to the
+ Synopsys DesignWare Memory Card Interface driver. Select this option
+ for platforms based on Exynos4 and Exynos5 SoC's.
+
+config MMC_DW_K3
+ bool "K3 specific extensions for Synopsys DW Memory Card Interface"
+ depends on MMC_DW
+ help
+ This selects support for Hisilicon K3 SoC specific extensions to the
+ Synopsys DesignWare Memory Card Interface driver. Select this option
+ for platforms based on Hisilicon K3 SoC's.
+
+config MMC_DW_ROCKCHIP
+ bool "Rockchip SD/MMC controller support"
+ depends on DM_MMC && OF_CONTROL
+ depends on MMC_DW
+ help
+ This enables support for the Rockchip SD/MMM controller, which is
+ based on Designware IP. The device is compatible with at least
+ SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
+ as removeable SD and micro-SD cards.
+
+config MMC_DW_SOCFPGA
+ bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
+ depends on ARCH_SOCFPGA
+ depends on MMC_DW
+ default y
+ help
+ This selects support for Altera SOCFPGA specific extensions to the
+ Synopsys DesignWare Memory Card Interface driver. Select this option
+ for platforms based on Altera SOCFPGA.
+
+config MMC_MXC
+ bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
+ help
+ This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
+ Multimedia Card Interface. If you have an i.MX or MPC512x platform
+ with a Multimedia Card slot, say Y here.
+
+ If unsure, say N.
+
+config MMC_MXS
+ bool "Freescale MXS Multimedia Card Interface support"
+ help
+ This selects the Freescale SSP MMC controller found on MXS based
+ platforms like mx23/28.
+
+ If unsure, say N.
+
+config MMC_OMAP_HS
+ bool "TI OMAP High Speed Multimedia Card Interface support"
+ help
+ This selects the TI OMAP High Speed Multimedia card Interface.
+ If you have an omap2plus board with a Multimedia Card slot,
+ say Y here.
+
+ If unsure, say N.
+
config SH_SDHI
bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
depends on RMOBILE
help
Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
+config MMC_UNIPHIER
+ bool "UniPhier SD/MMC Host Controller support"
+ depends on ARCH_UNIPHIER
+ depends on BLK && DM_MMC_OPS
+ depends on OF_CONTROL
+ help
+ This selects support for the SD/MMC Host Controller on UniPhier SoCs.
+
+config MMC_SANDBOX
+ bool "Sandbox MMC support"
+ depends on SANDBOX
+ depends on BLK && DM_MMC_OPS && OF_CONTROL
+ help
+ This select a dummy sandbox MMC driver. At present this does nothing
+ other than allow sandbox to be build with MMC support. This
+ improves build coverage for sandbox and makes it easier to detect
+ MMC build errors with sandbox.
+
+config MMC_SDHCI
+ bool "Secure Digital Host Controller Interface support"
+ help
+ This selects the generic Secure Digital Host Controller Interface.
+ It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
+ and Toshiba(R). Most controllers found in laptops are of this type.
+
+ If you have a controller with this interface, say Y here.
+
+ If unsure, say N.
+
+config MMC_SDHCI_IO_ACCESSORS
+ bool
+ depends on MMC_SDHCI
+ help
+ This is silent Kconfig symbol that is selected by the drivers that
+ need to overwrite SDHCI IO memory accessors.
+
+config MMC_SDHCI_SDMA
+ bool "Support SDHCI SDMA"
+ depends on MMC_SDHCI
+ help
+ This enables support for the SDMA (Single Operation DMA) defined
+ in the SD Host Controller Standard Specification Version 1.00 .
+
+config MMC_SDHCI_ATMEL
+ bool "Atmel SDHCI controller support"
+ depends on ARCH_AT91
+ depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
+ depends on MMC_SDHCI
+ help
+ This enables support for the Atmel SDHCI controller, which supports
+ the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
+ Memory Card Specification V3.0, and the SDIO V3.0 specification.
+ It is compliant with the SD Host Controller Standard V3.0
+ specification.
+
+config MMC_SDHCI_BCM2835
+ tristate "SDHCI support for the BCM2835 SD/MMC Controller"
+ depends on ARCH_BCM283X
+ depends on MMC_SDHCI
+ select MMC_SDHCI_IO_ACCESSORS
+ help
+ This selects the BCM2835 SD/MMC controller.
+
+ If you have a BCM2835 platform with SD or MMC devices,
+ say Y here.
+
+ If unsure, say N.
+
+config MMC_SDHCI_CADENCE
+ bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
+ depends on BLK && DM_MMC_OPS
+ depends on MMC_SDHCI
+ depends on OF_CONTROL
+ help
+ This selects the Cadence SD/SDIO/eMMC driver.
+
+ If you have a controller with this interface, say Y here.
+
+ If unsure, say N.
+
+config MMC_SDHCI_KONA
+ bool "SDHCI support on Broadcom KONA platform"
+ depends on MMC_SDHCI
+ help
+ This selects the Broadcom Kona Secure Digital Host Controller
+ Interface(SDHCI) support.
+ This is used in Broadcom mobile SoCs.
+
+ If you have a controller with this interface, say Y here.
+
+config MMC_SDHCI_MSM
+ bool "Qualcomm SDHCI controller"
+ depends on BLK && DM_MMC_OPS
+ depends on MMC_SDHCI
+ help
+ Enables support for SDHCI 2.0 controller present on some Qualcomm
+ Snapdragon devices. This device is compatible with eMMC v4.5 and
+ SD 3.0 specifications. Both SD and eMMC devices are supported.
+ Card-detect gpios are not supported.
+
+config MMC_SDHCI_MV
+ bool "SDHCI support on Marvell platform"
+ depends on ARCH_MVEBU
+ depends on MMC_SDHCI
+ help
+ This selects the Secure Digital Host Controller Interface on
+ Marvell platform.
+
+ If you have a controller with this interface, say Y here.
+
+ If unsure, say N.
+
+config MMC_SDHCI_PIC32
+ bool "Microchip PIC32 on-chip SDHCI support"
+ depends on DM_MMC && MACH_PIC32
+ depends on MMC_SDHCI
+ help
+ Support for Microchip PIC32 SDHCI controller.
+
+config MMC_SDHCI_ROCKCHIP
+ bool "Arasan SDHCI controller for Rockchip support"
+ depends on ARCH_ROCKCHIP
+ depends on DM_MMC && BLK && DM_MMC_OPS
+ depends on MMC_SDHCI
+ help
+ Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
+
+config MMC_SDHCI_S5P
+ bool "SDHCI support on Samsung S5P SoC"
+ depends on MMC_SDHCI
+ help
+ This selects the Secure Digital Host Controller Interface (SDHCI)
+ on Samsung S5P SoCs.
+
+ If you have a controller with this interface, say Y here.
+
+ If unsure, say N.
+
+config MMC_SDHCI_SPEAR
+ bool "SDHCI support on ST SPEAr platform"
+ depends on MMC_SDHCI
+ help
+ This selects the Secure Digital Host Controller Interface (SDHCI)
+ often referrered to as the HSMMC block in some of the ST SPEAR range
+ of SoC
+
+ If you have a controller with this interface, say Y here.
+
+ If unsure, say N.
+
+config MMC_SDHCI_XENON
+ bool "SDHCI support for the Xenon SDHCI controller"
+ depends on MMC_SDHCI && DM_MMC && OF_CONTROL
+ help
+ Support for Xenon SDHCI host controller on Marvell Armada 3700
+ 7k/8k ARM SoCs platforms
+
+ If you have a controller with this interface, say Y here.
+
+ If unsure, say N.
+
+config MMC_SDHCI_TEGRA
+ bool "SDHCI platform support for the Tegra SD/MMC Controller"
+ depends on TEGRA
+ default y
+ help
+ This selects the Tegra SD/MMC controller. If you have a Tegra
+ platform with SD or MMC devices, say Y here.
+
+ If unsure, say N.
+
+config MMC_SDHCI_ZYNQ
+ bool "Arasan SDHCI controller support"
+ depends on ARCH_ZYNQ || ARCH_ZYNQMP
+ depends on DM_MMC && OF_CONTROL && BLK && DM_MMC_OPS
+ depends on MMC_SDHCI
+ help
+ Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
+
+config MMC_SUNXI
+ bool "Allwinner sunxi SD/MMC Host Controller support"
+ depends on ARCH_SUNXI && !UART0_PORT_F
+ default y
+ help
+ This selects support for the SD/MMC Host Controller on
+ Allwinner sunxi SoCs.
+
+endif
+
endmenu
+
+config SYS_FSL_ERRATUM_ESDHC111
+ bool
+
+config SYS_FSL_ERRATUM_ESDHC13
+ bool
+
+config SYS_FSL_ERRATUM_ESDHC135
+ bool
+
+config SYS_FSL_ERRATUM_ESDHC_A001
+ bool