during serial port initialization (default y). Set this to n on
boards which have no debug serial port whatsoever.
+config SERIAL_PRESENT
+ bool "Provide a serial driver"
+ depends on DM_SERIAL
+ default y
+ help
+ In very space-constrained devices even the full UART driver is too
+ large. In this case the debug UART can still be used in some cases.
+ This option enables the full UART in U-Boot, so if is it disabled,
+ the full UART driver will be omitted, thus saving space.
+
+config SPL_SERIAL_PRESENT
+ bool "Provide a serial driver in SPL"
+ depends on DM_SERIAL
+ default y
+ help
+ In very space-constrained devices even the full UART driver is too
+ large. In this case the debug UART can still be used in some cases.
+ This option enables the full UART in SPL, so if is it disabled,
+ the full UART driver will be omitted, thus saving space.
+
config DM_SERIAL
bool "Enable Driver Model for serial drivers"
depends on DM
You will need to provide parameters to make this work. The driver will
be available until the real driver model serial is running.
+config DEBUG_UART_AR933X
+ bool "QCA/Atheros ar933x"
+ depends on AR933X_UART
+ help
+ Select this to enable a debug UART using the ar933x uart driver.
+ You will need to provide parameters to make this work. The
+ driver will be available until the real driver model serial is
+ running.
+
config DEBUG_UART_NS16550
bool "ns16550"
help
will need to provide parameters to make this work. The driver will
be available until the real driver-model serial is running.
+config DEBUG_UART_MESON
+ bool "Amlogic Meson"
+ depends on MESON_SERIAL
+ help
+ Select this to enable a debug UART using the serial_meson driver. You
+ will need to provide parameters to make this work. The driver will
+ be available until the real driver-model serial is running.
+
+config DEBUG_UART_UARTLITE
+ bool "Xilinx Uartlite"
+ help
+ Select this to enable a debug UART using the serial_uartlite driver.
+ You will need to provide parameters to make this work. The driver will
+ be available until the real driver-model serial is running.
+
+config DEBUG_UART_ARM_DCC
+ bool "ARM DCC"
+ help
+ Select this to enable a debug UART using the ARM JTAG DCC port.
+ The DCC port can be used for very early debugging and doesn't require
+ any additional setting like address/baudrate/clock. On systems without
+ any serial interface this is the easiest way how to get console.
+ Every ARM core has own DCC port which is the part of debug interface.
+ This port is available at least on ARMv6, ARMv7, ARMv8 and XScale
+ architectures.
+
config DEBUG_UART_ZYNQ
bool "Xilinx Zynq"
help
will need to provide parameters to make this work. The driver will
be available until the real driver model serial is running.
+config DEBUG_UART_PL010
+ bool "pl010"
+ help
+ Select this to enable a debug UART using the pl01x driver with the
+ PL010 UART type. You will need to provide parameters to make this
+ work. The driver will be available until the real driver model
+ serial is running.
+
+config DEBUG_UART_PL011
+ bool "pl011"
+ help
+ Select this to enable a debug UART using the pl01x driver with the
+ PL011 UART type. You will need to provide parameters to make this
+ work. The driver will be available until the real driver model
+ serial is running.
+
+config DEBUG_UART_PIC32
+ bool "Microchip PIC32"
+ depends on PIC32_SERIAL
+ help
+ Select this to enable a debug UART using the serial_pic32 driver. You
+ will need to provide parameters to make this work. The driver will
+ be available until the real driver model serial is running.
+
+config DEBUG_UART_UNIPHIER
+ bool "UniPhier on-chip UART"
+ depends on ARCH_UNIPHIER
+ help
+ Select this to enable a debug UART using the UniPhier on-chip UART.
+ You will need to provide DEBUG_UART_BASE to make this work. The
+ driver will be available until the real driver-model serial is
+ running.
+
endchoice
config DEBUG_UART_BASE
debug_uart_init()). This can be useful just as a check that
everything is working.
+config DEBUG_UART_SKIP_INIT
+ bool "Skip UART initialization"
+ help
+ Select this if the UART you want to use for debug output is already
+ initialized by the time U-Boot starts its execution.
+
config ALTERA_JTAG_UART
bool "Altera JTAG UART support"
depends on DM_SERIAL
Select this to enable an UART for Altera devices. Please find
details on the "Embedded Peripherals IP User Guide" of Altera.
+config AR933X_UART
+ bool "QCA/Atheros ar933x UART support"
+ depends on DM_SERIAL && SOC_AR933X
+ help
+ Select this to enable UART support for QCA/Atheros ar933x
+ devices. This driver uses driver model and requires a device
+ tree binding to operate, please refer to the document at
+ doc/device-tree-bindings/serial/qca,ar9330-uart.txt.
+
+config FSL_LPUART
+ bool "Freescale LPUART support"
+ help
+ Select this to enable a Low Power UART for Freescale VF610 and
+ QorIQ Layerscape devices.
+
+config PIC32_SERIAL
+ bool "Support for Microchip PIC32 on-chip UART"
+ depends on DM_SERIAL && MACH_PIC32
+ default y
+ help
+ Support for the UART found on Microchip PIC32 SoC's.
+
config SYS_NS16550
bool "NS16550 UART or compatible"
help
If you have a UniPhier based board and want to use the on-chip
serial ports, say Y to this option. If unsure, say N.
+config XILINX_UARTLITE
+ bool "Xilinx Uarlite support"
+ depends on DM_SERIAL && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || 4xx)
+ help
+ If you have a Xilinx based board and want to use the uartlite
+ serial ports, say Y to this option. If unsure, say N.
+
+config MESON_SERIAL
+ bool "Support for Amlogic Meson UART"
+ depends on DM_SERIAL && ARCH_MESON
+ help
+ If you have an Amlogic Meson based board and want to use the on-chip
+ serial ports, say Y to this option. If unsure, say N.
+
+config MSM_SERIAL
+ bool "Qualcomm on-chip UART"
+ depends on DM_SERIAL
+ help
+ Support Data Mover UART used on Qualcomm Snapdragon SoCs.
+ It should support all Qualcomm devices with UARTDM version 1.4,
+ for example APQ8016 and MSM8916.
+ Single baudrate is supported in current implementation (115200).
endmenu