function devicify() {
local device=${1}
+ assert isset device
+
if device_exists ${device}; then
echo "${device}"
return ${EXIT_OK}
function macify() {
local device=${1}
+ assert isset device
+
if mac_is_valid ${device}; then
echo "${device}"
return ${EXIT_OK}
# Check if the device bonded in a bonding device
function device_is_bonded() {
- local dev
- for dev in /sys/class/net/*; do
- # Skip crappy files
- [ -d "${dev}" ] || continue
-
- # Continue if not a bonding device
- device_is_bonding "${dev##*/}" || continue
-
- if grep -q "\<${1}\>" ${dev}/bonding/slaves; then
- return 0
- fi
- done
+ local device=${1}
- return 1
+ [ -d "${SYS_CLASS_NET}/${device}/master" ]
}
# Check if the device is a bridge
grep -q "${1}$" /proc/net/vlan/config
}
-function device_is_vlan() { # XXX Compat function
- log DEBUG "Deprecated function device_is_vlan() was used."
-
- device_is_virtual $@
-}
-
# Check if the device is a ppp device
function device_is_ppp() {
local device=${1}
function device_get_type() {
local device=$(devicify ${1})
- if device_is_vlan ${device}; then
+ if device_is_virtual ${device}; then
echo "vlan"
elif device_is_bonding ${device}; then
fi
}
+function device_get_status() {
+ local device=${1}
+
+ assert isset device
+
+ local status=${STATUS_UNKNOWN}
+
+ if ! device_has_carrier ${device}; then
+ status=${STATUS_NOCARRIER}
+ elif device_is_up ${device}; then
+ status=${STATUS_UP}
+ elif device_is_down ${device}; then
+ status=${STATUS_DOWN}
+ fi
+
+ assert isset status
+
+ echo "${status}"
+}
+
function device_get_address() {
local device=${1}
return ${ret}
}
-function devices_get_all() {
+function device_get() {
local device
+ local devices
+
for device in ${SYS_CLASS_NET}/*; do
- echo "$(basename ${device})"
- done | sort
+ device=$(basename ${device})
+
+ # bonding_masters is no device
+ [ "${device}" = "bonding_masters" ] && continue
+
+ devices="${devices} ${device}"
+ done
+
+ echo ${devices}
+ return ${EXIT_OK}
+}
+
+function devices_get_all() {
+ device_get
}
# Check if a device has a cable plugged in
echo "${destination}"
}
-function device_rename() {
- warning_log "Called deprecated function 'device_rename'"
-
- device_set_name $@
-}
-
function device_hash() {
local device=${1}
function device_set_up() {
local device=$(devicify ${1})
+ # Silently fail if device was not found
+ [ -z "${device}" ] && return ${EXIT_ERROR}
+
# Do nothing if device is already up
device_is_up ${device} && return ${EXIT_OK}
local parent
if device_is_virtual ${device}; then
- parent=$(device_virtual_get_parent ${device})
+ parent=$(virtual_get_parent ${device})
device_is_up ${parent} && return ${EXIT_OK}
local parent
if device_is_virtual ${device}; then
- parent=$(device_virtual_get_parent ${device})
+ parent=$(virtual_get_parent ${device})
device_is_up ${parent} || return ${EXIT_OK}
log INFO "Running discovery process on device '${device}'."
local hook
- for hook in $(hooks_get_all); do
- hook_exec ${hook} discover ${device}
+ for hook in $(hook_zone_get_all); do
+ hook_zone_exec ${hook} discover ${device}
done
}
-function device_create_virtual() {
- log WARN "Called deprecated function device_create_virtual"
- device_virtual_create $@
-}
-
-function device_virtual_create() {
- local port=$(devicify ${1})
- local vid=${2}
- local mac=${3}
- local newport=${port}v${vid}
-
- if [ -z "${mac}" ]; then
- mac=$(mac_generate)
- fi
-
- log INFO "Creating virtual device '${newport}' with address '${mac}'."
-
- local oldport=$(device_virtual_get_by_parent_and_vid ${port} ${vid})
-
- if device_exists ${oldport}; then
- local differences
-
- if [ "${oldport}" != "${newport}" ]; then
- differences="${differences} name"
- fi
- if [ "$(device_get_address ${oldport})" != "${mac}" ]; then
- differences="${differences} address"
- fi
-
- echo "differences: $differences"
-
- if [ -n "${differences}" ]; then
- if device_is_used ${oldport}; then
- error_log "There was a device '${oldport}' set up with VID '${vid}' and parent '${port}' which is used somewhere else. Cannot go on."
- return ${EXIT_ERROR}
- else
- log DEBUG "There is a device '${oldport}' but it not used, so we grab it to ourselves."
- fi
- else
- log DEBUG "Device '${newport}' already exists and reflects our configuration. Go on."
-
- device_set_up ${oldport}
- return ${EXIT_OK}
- fi
-
- else
- log DEBUG "Virtual device '${newport}' does not exist, yet."
-
- vconfig set_name_type DEV_PLUS_VID_NO_PAD >/dev/null
- vconfig add ${port} ${vid} >/dev/null
-
- if [ $? -ne ${EXIT_OK} ]; then
- error_log "Could not create virtual device '${newport}'."
- return ${EXIT_ERROR}
- fi
-
- oldport=$(device_virtual_get_by_parent_and_vid ${port} ${vid})
-
- fi
-
- assert device_exists ${oldport}
-
- if ! device_exists ${oldport}; then
- error "Could not determine the created virtual device '${newport}'."
- return ${EXIT_ERROR}
- fi
-
- # The device is expected to be named like ${port}.${vid}
- # and will be renamed to the virtual schema
- device_set_name ${oldport} ${newport}
-
- if [ $? -ne ${EXIT_OK} ]; then
- error_log "Could not set name of virtual device '${newport}'."
- return ${EXIT_ERROR}
- fi
-
- assert device_exists ${newport}
+function device_has_ipv4() {
+ local device=${1}
+ local addr=${2}
- # Setting new mac address
- device_set_address ${newport} ${mac}
-
- if [ $? -ne ${EXIT_OK} ]; then
- error_log "Could not set address '${mac}' to virtual device '${newport}'."
+ if ! device_exists ${device}; then
+ error "Device '${device}' does not exist."
return ${EXIT_ERROR}
fi
- # Bring up the new device
- device_set_up ${newport}
-
- return ${EXIT_OK}
+ ip addr show ${device} | grep -q -e "inet " -e "${addr}"
}
-function device_virtual_remove() {
- local device=$(devicify ${1})
-
- log INFO "Removing virtual device '${device}' with address '$(macify ${device})'."
-
- device_set_down ${device}
-
- vconfig rem ${device} >/dev/null
+function device_has_ipv6() {
+ local device=${1}
+ local addr=${2}
- if [ $? -ne ${EXIT_OK} ]; then
- error_log "Could not remote virtual device '${newport}'."
+ if ! device_exists ${device}; then
+ error "Device '${device}' does not exist."
return ${EXIT_ERROR}
fi
- return ${EXIT_OK}
-}
-
-function device_virtual_get_parent() {
- local device=${1}
+ local prefix=${addr##*/}
+ addr=$(ipv6_implode ${addr%%/*})
- local parent=$(grep "^${device}" < /proc/net/vlan/config | awk '{ print $NF }')
-
- if device_exists ${parent}; then
- echo "${parent}"
- return ${EXIT_OK}
+ if [ -n "${prefix}" ]; then
+ addr="${addr}/${prefix}"
fi
- return ${EXIT_ERROR}
-}
-
-function device_virtual_get_by_parent_and_vid() {
- local parent=${1}
- local vid=${2}
-
- local v_port
- local v_id
- local v_parent
-
- fgrep '|' < /proc/net/vlan/config | tr -d '|' | \
- while read v_port v_id v_parent; do
- if [ "${v_parent}" = "${parent}" ] && [ "${v_id}" = "${vid}" ]; then
- echo "${v_port}"
- return ${EXIT_OK}
- fi
- done
-
- return ${EXIT_ERROR}
+ ip addr show ${device} | grep -q "inet6 ${addr}"
}
-function device_bonding_create() {
+function __device_get_file() {
local device=${1}
- local mac=${2}
+ local file=${2}
- [ -z "${mac}" ] && mac=$(mac_generate)
+ assert isset device
+ assert isset file
- log INFO "Creating bonding device '${device}' (${mac})."
-
- echo "+${device}" > /sys/class/net/bonding_masters
- device_set_address ${mac}
- device_set_up ${device}
-}
-
-function device_bonding_remove() {
- local device=$(devicify ${1})
-
- log INFO "Remove bonding device '${device}'."
-
- device_set_down ${device}
- echo "-${device}" > /sys/class/net/bonding_masters
+ cat ${SYS_CLASS_NET}/${device}/${file}
}
-function bonding_set_mode() {
+function device_get_rx_bytes() {
local device=${1}
- local mode=${2}
-
- log INFO "Setting bonding mode on '${device}' '${mode}'."
- echo "${mode}" > /sys/class/net/${device}/bonding/mode
+ __device_get_file ${device} statistics/rx_bytes
}
-function bonding_enslave_device() {
- local device=$(devicify ${1})
- local slave=$(devicify ${2})
- shift 2
-
- log INFO "Enslaving slave '${slave}' to '${device}'."
-
- device_set_down ${slave}
- echo "+${slave}" > /sys/class/net/${device}/bonding/slaves
-}
-
-function bridge_attach_device() {
- local bridge=${1}
- local device=${2}
-
- if ! device_exists ${bridge}; then
- error "Bridge '${bridge}' does not exist."
- return ${EXIT_ERROR}
- fi
-
- if ! device_exists ${device}; then
- error "Device '${device}' does not exist."
- return ${EXIT_ERROR}
- fi
-
- log INFO "Attaching device '${device}' to bridge '${bridge}'."
-
- # XXX device_set_up ${device} # Do we need this here?
+function device_get_tx_bytes() {
+ local device=${1}
- brctl addif ${bridge} ${device}
+ __device_get_file ${device} statistics/tx_bytes
}
-function bridge_detach_device() {
- local bridge=${1}
- local device=${2}
-
- if ! device_exists ${bridge}; then
- error "Bridge '${bridge}' does not exist."
- return ${EXIT_ERROR}
- fi
-
- if ! device_exists ${device}; then
- error "Device '${device}' does not exist."
- return ${EXIT_ERROR}
- fi
-
- log INFO "Detaching device '${device}' from bridge '${bridge}'."
-
- brctl delif ${bridge} ${device}
+function device_get_rx_packets() {
+ local device=${1}
- device_set_down ${device}
+ __device_get_file ${device} statistics/rx_packets
}
-function bridge_is_forwarding() {
- local seconds=45
- local zone=${1}
-
- bridge_has_carrier ${zone} || return ${EXIT_ERROR}
-
- local device
- while [ ${seconds} -gt 0 ]; do
- for device in ${SYS_CLASS_NET}/${zone}/brif/*; do
- [ -e "${device}/state" ] || continue
- if [ "$(<${device}/state)" = "3" ]; then
- return ${EXIT_OK}
- fi
- done
- sleep 1
- seconds=$((${seconds} - 1))
- done
+function device_get_tx_packets() {
+ local device=${1}
- return ${EXIT_ERROR}
+ __device_get_file ${device} statistics/tx_packets
}
-function bridge_has_carrier() {
- local zone=${1}
-
- local has_carrier=${EXIT_ERROR}
-
- local device
- for device in ${SYS_CLASS_NET}/${zone}/brif/*; do
- device=$(basename ${device})
- device_exists ${device} || continue
-
- device_has_carrier ${device} && has_carrier=${EXIT_OK}
- done
+function device_get_rx_errors() {
+ local device=${1}
- return ${has_carrier}
+ __device_get_file ${device} statistics/rx_errors
}
-function device_has_ipv4() {
+function device_get_tx_errors() {
local device=${1}
- local addr=${2}
- if ! device_exists ${device}; then
- error "Device '${device}' does not exist."
- return ${EXIT_ERROR}
- fi
-
- ip addr show ${device} | grep -q -e "inet " -e "${addr}"
+ __device_get_file ${device} statistics/tx_errors
}
projects / people / ms / network.git / blobdiff