sunxi: power: enabled support for axp818

[people/ms/u-boot.git] / include / axp221.h

diff --git a/include/axp221.h b/include/axp221.h
index 6f24a617b67263f5fd43b5c10629f022cb9e5a03..0ee21b62806bf51f7e7b227daa9f6d43a9a8b5d1 100644 (file)
--- a/include/axp221.h
+++ b/include/axp221.h
@@ -6,14 +6,6 @@
  * SPDX-License-Identifier:    GPL-2.0+
  */
 
-#define AXP221_CHIP_ADDR 0x68
-#define AXP221_CTRL_ADDR 0x3e
-#define AXP221_INIT_DATA 0x3e
-
-#define AXP223_DEVICE_ADDR 0x3a3
-#define AXP223_RUNTIME_ADDR 0x2d
-#define AXP223_DEVICE_MODE_DATA 0x7c3e00
-
 /* Page 0 addresses */
 #define AXP221_CHIP_ID         0x03
 #define AXP221_OUTPUT_CTRL1    0x10
@@ -60,23 +52,13 @@
 /* Page 1 addresses */
 #define AXP221_SID             0x20
 
-/* We support drivebus control */
-#define AXP_DRIVEBUS
-
-int axp221_set_dcdc1(unsigned int mvolt);
-int axp221_set_dcdc2(unsigned int mvolt);
-int axp221_set_dcdc3(unsigned int mvolt);
-int axp221_set_dcdc4(unsigned int mvolt);
-int axp221_set_dcdc5(unsigned int mvolt);
-int axp221_set_dldo1(unsigned int mvolt);
-int axp221_set_dldo2(unsigned int mvolt);
-int axp221_set_dldo3(unsigned int mvolt);
-int axp221_set_dldo4(unsigned int mvolt);
-int axp221_set_aldo1(unsigned int mvolt);
-int axp221_set_aldo2(unsigned int mvolt);
-int axp221_set_aldo3(unsigned int mvolt);
-int axp221_set_eldo(int eldo_num, unsigned int mvolt);
-int axp221_init(void);
-int axp221_get_sid(unsigned int *sid);
-int axp_drivebus_enable(void);
-int axp_drivebus_disable(void);
+/* For axp_gpio.c */
+#define AXP_POWER_STATUS               0x00
+#define AXP_POWER_STATUS_VBUS_PRESENT          (1 << 5)
+#define AXP_GPIO0_CTRL                 0x90
+#define AXP_GPIO1_CTRL                 0x92
+#define AXP_GPIO_CTRL_OUTPUT_LOW               0x00 /* Drive pin low */
+#define AXP_GPIO_CTRL_OUTPUT_HIGH              0x01 /* Drive pin high */
+#define AXP_GPIO_CTRL_INPUT                    0x02 /* Input */
+#define AXP_GPIO_STATE                 0x94
+#define AXP_GPIO_STATE_OFFSET                  0