Convert CONFIG_CMD_FDC to Kconfig

[people/ms/u-boot.git] / include / common.h

diff --git a/include/common.h b/include/common.h
index bbdb943cf01951e242fea783417adef38b8c7ebd..45f190a600f58b39b140f3638ce6530e2636e4eb 100644 (file)
--- a/include/common.h
+++ b/include/common.h
@@ -203,14 +203,28 @@ typedef void (interrupt_handler_t)(void *);
  */
 int dram_init(void);
 
+/**
+ * dram_init_banksize() - Set up DRAM bank sizes
+ *
+ * This can be implemented by boards to set up the DRAM bank information in
+ * gd->bd->bi_dram(). It is called just before relocation, after dram_init()
+ * is called.
+ *
+ * If this is not provided, a default implementation will try to set up a
+ * single bank. It will do this if CONFIG_NR_DRAM_BANKS and
+ * CONFIG_SYS_SDRAM_BASE are set. The bank will have a start address of
+ * CONFIG_SYS_SDRAM_BASE and the size will be determined by a call to
+ * get_effective_memsize().
+ *
+ * @return 0 if OK, -ve on error
+ */
+int dram_init_banksize(void);
+
 void   hang            (void) __attribute__ ((noreturn));
 
 int    timer_init(void);
 int    cpu_init(void);
 
-/* */
-phys_size_t initdram(void);
-
 #include <display_options.h>
 
 /* common/main.c */
@@ -285,6 +299,13 @@ int print_cpuinfo(void);
 int update_flash_size(int flash_size);
 int arch_early_init_r(void);
 
+/*
+ * setup_board_extra() - Fill in extra details in the bd_t structure
+ *
+ * @return 0 if OK, -ve on error
+ */
+int setup_board_extra(void);
+
 /**
  * arch_fsp_init() - perform firmware support package init
  *
@@ -478,9 +499,19 @@ void       reset_phy     (void);
 void   fdc_hw_init   (void);
 
 /* $(BOARD)/eeprom.c */
+#ifdef CONFIG_CMD_EEPROM
 void eeprom_init  (int bus);
 int  eeprom_read  (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
 int  eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
+#else
+/*
+ * Some EEPROM code is depecated because it used the legacy I2C interface. Add
+ * some macros here so we don't have to touch every one of those uses
+ */
+#define eeprom_init(bus)
+#define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
+#define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
+#endif
 
 /*
  * Set this up regardless of board