common: Add DISPLAY_BOARDINFO

[people/ms/u-boot.git] / include / configs / CPCI4052.h

diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index bf85439802a5727b1544f19f9040856a0b628999..6232059b2cbe4aa0e77fdcb0ba0a95bcb4330837 100644 (file)
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -30,7 +30,6 @@
 #define CONFIG_SYS_CLK_FREQ    33330000 /* external frequency to pll   */
 
 #define CONFIG_BAUDRATE                9600
-#define CONFIG_BOOTDELAY       3       /* autoboot after 3 seconds     */
 
 #undef CONFIG_BOOTARGS
 #undef CONFIG_BOOTCOMMAND
@@ -61,22 +60,13 @@
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_EEPROM
 
@@ -92,9 +82,7 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-
-#undef CONFIG_SYS_HUSH_PARSER                  /* use "hush" command parser    */
+#undef CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size      */
@@ -109,13 +97,10 @@
 
 #define CONFIG_SYS_CONSOLE_INFO_QUIET  1       /* don't print console @ startup*/
 
-#define CONFIG_AUTO_COMPLETE   1       /* add autocompletion support   */
-
 #define CONFIG_SYS_MEMTEST_START       0x0400000       /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 
 #define CONFIG_CONS_INDEX      1       /* Use UART0                    */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
@@ -123,28 +108,11 @@
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK            /* no external serial clock used */
 #define CONFIG_SYS_BASE_BAUD       691200
 
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      \
-       { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
-        57600, 115200, 230400, 460800, 921600 }
-
 #define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
 #define CONFIG_SYS_EXTBDINFO   1               /* To use extended board_into (bd_t) */
 
 #define CONFIG_CMDLINE_EDITING         /* add command line history     */
 
-#define CONFIG_LOOPW            1       /* enable loopw command         */
-
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
-
-#define CONFIG_VERSION_VARIABLE 1      /* include version env variable */
-
-#define CONFIG_AUTOBOOT_KEYED  1
-#define CONFIG_AUTOBOOT_PROMPT \
-       "Press SPACE to abort autoboot in %d seconds\n", bootdelay
-#undef CONFIG_AUTOBOOT_DELAY_STR
-#define CONFIG_AUTOBOOT_STOP_STR " "
-
 #define CONFIG_SYS_RX_ETH_BUFFER       16      /* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
@@ -218,9 +186,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-
 /*-----------------------------------------------------------------------
  * FLASH organization
  */