Add GPL-2.0+ SPDX-License-Identifier to source files

[people/ms/u-boot.git] / include / configs / DU405.h

diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index 8f1fc78bce2fd6619c5095182e5b330646e12cb1..b6825d5ad2657ff6ee1fb2cf8a93a97b87518027 100644 (file)
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2001
  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+ 
  */
 
 /*
@@ -36,6 +20,8 @@
 #define CONFIG_4xx             1       /* ...member of PPC4xx family   */
 #define CONFIG_DU405           1       /* ...on a DU405 board          */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFFFD0000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* call board_early_init_f()    */
 #define CONFIG_MISC_INIT_R      1       /* call misc_init_r()           */
 
@@ -55,7 +41,6 @@
 #define CONFIG_PHY_ADDR                0       /* PHY address                  */
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
 #define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
-#define CONFIG_NET_MULTI       1
 #undef  CONFIG_HAS_ETH1
 
 /*
@@ -73,6 +58,11 @@
 #include <config_cmd_default.h>
 
 #undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_EDITENV
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_MII
@@ -109,6 +99,12 @@
 #define CONFIG_SYS_MEMTEST_START       0x0400000       /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 
+#define CONFIG_CONS_INDEX      1       /* Use UART0                    */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_serial_clock()
+
 #define CONFIG_SYS_EXT_SERIAL_CLOCK    11059200  /* use external serial clock  */
 
 /* The following table includes the supported baudrates */
@@ -125,32 +121,6 @@
 
 #define CONFIG_SYS_RX_ETH_BUFFER       16      /* use 16 rx buffer on 405 emac */
 
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define PCI_HOST_ADAPTER 0             /* configure ar pci adapter     */
-#define PCI_HOST_FORCE 1               /* configure as pci host        */
-#define PCI_HOST_AUTO  2               /* detected via arbiter enable  */
-
-#define CONFIG_PCI                     /* include pci support          */
-#define CONFIG_PCI_HOST PCI_HOST_AUTO  /* select pci host function     */
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play         */
-                                       /* resource configuration       */
-
-#define CONFIG_PCI_SCAN_SHOW           /* print pci devices @ startup  */
-
-#define CONFIG_PCI_BOOTDELAY   0       /* enable pci bootdelay variable*/
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0404  /* PCI Device ID: CPCI-ISER4    */
-#define CONFIG_SYS_PCI_PTM1LA  0x00000000      /* point to sdram               */
-#define CONFIG_SYS_PCI_PTM1MS  0xff000001      /* 16MB, enable hard-wired to 1 */
-#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CONFIG_SYS_PCI_PTM2LA  0xffe00000      /* point to flash               */
-#define CONFIG_SYS_PCI_PTM2MS  0xffe00001      /* 2MB, enable                  */
-#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
-
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
  *-----------------------------------------------------------------------
@@ -299,18 +269,8 @@
 #define CONFIG_SYS_OCM_DATA_SIZE       0x1000
 
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM             */
-#define CONFIG_SYS_INIT_RAM_END        CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM     */
-#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM    */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */