common: Add DISPLAY_BOARDINFO

[people/ms/u-boot.git] / include / configs / MPC837XEMDS.h

diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 832c10f5c016c7b4d0f1b0eeecdfd318ae0b8d52..0f3e01d015daa7e2ec74a4e9f48d90a3b03c6256 100644 (file)
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -198,7 +198,7 @@
 #endif
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN  (512 * 1024) /* Reserved for malloc */
 
 /*
@@ -280,7 +280,6 @@
  * NAND Flash on the Local Bus
  */
 #define CONFIG_CMD_NAND                1
-#define CONFIG_MTD_NAND_VERIFY_WRITE   1
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_NAND_FSL_ELBC   1
 
@@ -307,7 +306,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -318,14 +316,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -387,8 +377,6 @@ extern int board_pci_host_broken(void);
 #define CONFIG_PQ_MDS_PIB      1 /* PQ MDS Platform IO Board */
 
 #define CONFIG_HAS_FSL_DR_USB  1 /* fixup device tree for the DR USB */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
@@ -454,7 +442,6 @@ extern int board_pci_host_broken(void);
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 /*
@@ -484,26 +471,15 @@ extern int board_pci_host_broken(void);
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_DATE
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
 
@@ -515,10 +491,7 @@ extern int board_pci_host_broken(void);
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -546,6 +519,7 @@ extern int board_pci_host_broken(void);
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (256 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 /*
  * Core HID Setup
@@ -683,7 +657,6 @@ extern int board_pci_host_broken(void);
 
 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY 6     /* -1 disables auto-boot */
 #undef CONFIG_BOOTARGS         /* the boot command will set bootargs */
 
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
@@ -713,7 +686,6 @@ extern int board_pci_host_broken(void);
        "tftp $fdtaddr $fdtfile;"                                       \
        "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-
 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
 
 #endif /* __CONFIG_H */