Define tsec flag values in config files

[people/ms/u-boot.git] / include / configs / MPC8540ADS.h

diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 8e4d2c95a44eb763d7d838a9e64bc57241ed9d48..b7749926717f38ba2c29da3a6173d00870bbdcb2 100644 (file)
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -312,12 +312,16 @@
 #define CFG_64BIT_VSPRINTF     1
 #define CFG_64BIT_STRTOUL      1
 
-/* I2C */
-#define  CONFIG_HARD_I2C               /* I2C with hardware support*/
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C                /* I2C with hardware support*/
 #undef CONFIG_SOFT_I2C                 /* I2C bit-banged */
 #define CFG_I2C_SPEED          400000  /* I2C speed and slave address */
 #define CFG_I2C_SLAVE          0x7F
 #define CFG_I2C_NOPROBES        {0x69} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET         0x3000
 
 /* RapidIO MMU */
 #define CFG_RIO_MEM_BASE       0xc0000000      /* base address */
@@ -326,13 +330,12 @@
 
 /*
  * General PCI
- * Addresses are mapped 1-1.
+ * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 #define CFG_PCI1_MEM_BASE      0x80000000
 #define CFG_PCI1_MEM_PHYS      CFG_PCI1_MEM_BASE
 #define CFG_PCI1_MEM_SIZE      0x20000000      /* 512M */
-
-#define CFG_PCI1_IO_BASE       0x0
+#define CFG_PCI1_IO_BASE       0x00000000
 #define CFG_PCI1_IO_PHYS       0xe2000000
 #define CFG_PCI1_IO_SIZE       0x100000        /* 1M */
 
@@ -363,14 +366,16 @@
 #endif
 
 #define CONFIG_MII             1       /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1   1
-#define CONFIG_MPC85XX_TSEC1_NAME      "TSEC0"
-#define CONFIG_MPC85XX_TSEC2   1
-#define CONFIG_MPC85XX_TSEC2_NAME      "TSEC1"
+#define CONFIG_TSEC1   1
+#define CONFIG_TSEC1_NAME      "TSEC0"
+#define CONFIG_TSEC2   1
+#define CONFIG_TSEC2_NAME      "TSEC1"
 #define TSEC1_PHY_ADDR         0
 #define TSEC2_PHY_ADDR         1
 #define TSEC1_PHYIDX           0
 #define TSEC2_PHYIDX           0
+#define TSEC1_FLAGS            TSEC_GIGABIT
+#define TSEC2_FLAGS            TSEC_GIGABIT
 
 
 #if CONFIG_HAS_FEC
@@ -378,6 +383,7 @@
 #define CONFIG_MPC85XX_FEC_NAME                "FEC"
 #define FEC_PHY_ADDR           3
 #define FEC_PHYIDX             0
+#define FEC_FLAGS              0
 #endif
 
 /* Options are: TSEC[0-1], FEC */
@@ -404,37 +410,33 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
 #if defined(CFG_RAMBOOT)
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL        \
-                                | CFG_CMD_PING         \
-                                | CFG_CMD_PCI          \
-                                | CFG_CMD_I2C)         \
-                               &                       \
-                                ~(CFG_CMD_ENV          \
-                                 | CFG_CMD_LOADS))
-  #else
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL        \
-                                | CFG_CMD_PING         \
-                                | CFG_CMD_I2C)         \
-                               &                       \
-                                ~(CFG_CMD_ENV          \
-                                 | CFG_CMD_LOADS))
-  #endif
-#else
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL         \
-                               | CFG_CMD_PCI           \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C)
-  #else
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL         \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C)
-  #endif
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
@@ -445,7 +447,7 @@
 #define CFG_LOAD_ADDR  0x2000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
     #define CFG_CBSIZE 1024            /* Console I/O Buffer Size */
 #else
     #define CFG_CBSIZE 256             /* Console I/O Buffer Size */
@@ -466,7 +468,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE                32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 #endif
 
@@ -478,7 +480,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
@@ -517,8 +519,10 @@
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
    "netdev=eth0\0"                                                      \
    "consoledev=ttyS0\0"                                                 \
-   "ramdiskaddr=400000\0"                                              \
-   "ramdiskfile=your.ramdisk.u-boot\0"
+   "ramdiskaddr=1000000\0"                                             \
+   "ramdiskfile=your.ramdisk.u-boot\0"                                 \
+   "fdtaddr=400000\0"                                                  \
+   "fdtfile=your.fdt.dtb\0"
 
 #define CONFIG_NFSBOOTCOMMAND                                          \
    "setenv bootargs root=/dev/nfs rw "                                  \
@@ -526,14 +530,16 @@
       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $loadaddr $bootfile;"                                          \
-   "bootm $loadaddr"
+   "tftp $fdtaddr $fdtfile;"                                           \
+   "bootm $loadaddr - $fdtaddr"
 
 #define CONFIG_RAMBOOTCOMMAND \
    "setenv bootargs root=/dev/ram rw "                                  \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $ramdiskaddr $ramdiskfile;"                                    \
    "tftp $loadaddr $bootfile;"                                          \
-   "bootm $loadaddr $ramdiskaddr"
+   "tftp $fdtaddr $fdtfile;"                                           \
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
 #define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND