Add PCI support for MPC8568MDS board

[people/ms/u-boot.git] / include / configs / MPC8568MDS.h

diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 3f65644fdd40197980b98f050dfc18d675921946..5bc953adc42440584b91f320d5500c14474a89ce 100644 (file)
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -33,7 +33,7 @@
 #define CONFIG_MPC8568         1       /* MPC8568 specific */
 #define CONFIG_MPC8568MDS      1       /* MPC8568MDS board specific */
 
-#undef CONFIG_PCI
+#define CONFIG_PCI
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
@@ -306,11 +306,14 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C                /* I2C with hardware support*/
 #undef CONFIG_SOFT_I2C                 /* I2C bit-banged */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
 #define CFG_I2C_SPEED          400000  /* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR    0x57
+#define CFG_I2C_EEPROM_ADDR    0x52
 #define CFG_I2C_SLAVE          0x7F
-#define CFG_I2C_NOPROBES        {0x69} /* Don't probe these addrs */
+#define CFG_I2C_NOPROBES        {0,0x69}       /* Don't probe these addrs */
 #define CFG_I2C_OFFSET         0x3000
+#define CFG_I2C2_OFFSET                0x3100
 
 /*
  * General PCI
@@ -318,7 +321,7 @@ extern unsigned long get_clock_freq(void);
  */
 #define CFG_PCI1_MEM_BASE      0x80000000
 #define CFG_PCI1_MEM_PHYS      CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE      0x10000000      /* 256M */
+#define CFG_PCI1_MEM_SIZE      0x20000000      /* 512M */
 #define CFG_PCI1_IO_BASE       0x00000000
 #define CFG_PCI1_IO_PHYS       0xe2000000
 #define CFG_PCI1_IO_SIZE       0x00800000      /* 8M */
@@ -353,12 +356,12 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 #define CONFIG_MII             1       /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1   1
-#define CONFIG_MPC85XX_TSEC1_NAME      "eTSEC0"
-#define CONFIG_MPC85XX_TSEC2   1
-#define CONFIG_MPC85XX_TSEC2_NAME      "eTSEC1"
-#undef  CONFIG_MPC85XX_TSEC3
-#undef  CONFIG_MPC85XX_TSEC4
+#define CONFIG_TSEC1   1
+#define CONFIG_TSEC1_NAME      "eTSEC0"
+#define CONFIG_TSEC2   1
+#define CONFIG_TSEC2_NAME      "eTSEC1"
+#undef  CONFIG_TSEC3
+#undef  CONFIG_TSEC4
 #undef  CONFIG_MPC85XX_FEC
 
 #define TSEC1_PHY_ADDR         2
@@ -383,19 +386,29 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
 #if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL \
-                               | CFG_CMD_PCI \
-                               | CFG_CMD_PING \
-                               | CFG_CMD_I2C \
-                               | CFG_CMD_MII)
-#else
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL \
-                               | CFG_CMD_PING \
-                               | CFG_CMD_I2C \
-                               | CFG_CMD_MII)
+    #define CONFIG_CMD_PCI
 #endif
-#include <cmd_confdefs.h>
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
@@ -405,7 +418,7 @@ extern unsigned long get_clock_freq(void);
 #define CFG_LONGHELP                   /* undef to save memory */
 #define CFG_LOAD_ADDR  0x2000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size */
 #else
 #define CFG_CBSIZE     256                     /* Console I/O Buffer Size */
@@ -425,7 +438,7 @@ extern unsigned long get_clock_freq(void);
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE        32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 #endif
 
@@ -437,7 +450,7 @@ extern unsigned long get_clock_freq(void);
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif