Move CONFIG_OF_LIBFDT to Kconfig

[people/ms/u-boot.git] / include / configs / TQM5200.h

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 8a4dd358d8b25163c1ecdb18e1598250d544be7f..a3faf0317c937137e50edc46ac9bf6140caf6a09 100644 (file)
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -1,11 +1,11 @@
 /*
- * (C) Copyright 2003-2005
+ * (C) Copyright 2003-2014
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2004-2006
  * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
  *
- * SPDX-License-Identifier:    GPL-2.0+ 
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -16,10 +16,10 @@
  * (easy to change)
  */
 
-#define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU               */
-#define CONFIG_MPC5200         1       /* (more precisely an MPC5200 CPU)      */
+#define CONFIG_MPC5200         1       /* This is an MPC5200 CPU               */
 #define CONFIG_TQM5200         1       /* ... on TQM5200 module                */
 #undef CONFIG_TQM5200_REV100           /*  define for revision 100 modules     */
+#define CONFIG_DISPLAY_BOARDINFO
 
 /*
  * Valid values for CONFIG_SYS_TEXT_BASE are:
@@ -165,8 +165,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
@@ -174,7 +172,6 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
@@ -337,7 +334,7 @@
  *
  * Please notice, that the resulting clock frequency could differ from the
  * configured value. This is because the I2C clock is derived from system
- * clock over a frequency divider with only a few divider values. U-boot
+ * clock over a frequency divider with only a few divider values. U-Boot
  * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
  * approximation allways lies below the configured value, never above.
  */
@@ -605,7 +602,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory     */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt   */
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define        CONFIG_SYS_HUSH_PARSER          1       /* use "hush" command parser    */
@@ -632,8 +628,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x100000        /* default load address */
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
 /*
  * Enable loopw command.
  */
@@ -736,7 +730,6 @@
  * Open firmware flat tree support
  *-----------------------------------------------------------------------
  */
-#define CONFIG_OF_LIBFDT       1
 #define CONFIG_OF_BOARD_SETUP  1
 
 #define OF_CPU                 "PowerPC,5200@0"